Tender For Reapir And Resurfacing And Misc Other Road Works Under Age B/R- I And Age B/R- Ii At Military Station Bhuj
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Nov 2026
8 days left
EMD
1.85 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gandhinagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Reapir And Resurfacing And Misc Other Road Works Under Age B/R- I And Age B/R- Ii At Military Station Bhuj
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE (A) AHMEDABAD NAME OF WORK: REAPIR AND RESURFACING AND MISC OTHER ROAD WORKS UNDER AGE B/R- I AND AGE B/R- II AT MILITARY STATION BHUJ Contract No: CWE (A)/BHUJ/ OF 2026-2027 SERIAL PAGE NO Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # SL NO ITEM DESCRIPTION Item Code / Make QTY UNITS Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Material and labour for preparing existing black top surfaces by wire brushing for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc all as specified and directed by Engineer-in-charge. |
| 3 | Material and labour for applying evenly a priming/tack coat with paving bitumen primer at 2.5 kg per 10 sqm all as specified and directed by engineer-in-charge. |
| 4 | Material and labour for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm all as per specified and directed by eng-in-charge. |
| 5 | Material and labour for preparing WMM surfaces by wire brushing for removing caked mud etc , sweeping with brooms and finally fanning cleaned surface with gunny bags to remove all loose dirt etc all as per specified and as directed by Engr-in-Charge. |
| 6 | Material and labour for applying evenly a priming/tack coat with paving bitumen primer at 7.5 kg per 10 sqm all as specified and directed by engineer-in-charge. |
| 7 | Material and labour for premix bituminus macadam with 4% (paving bitumen VG 30 Gde) binder content by weight of total mix laid/rolled and compacted to required gradient and camber (Consolidated Avg thickness 75mm or less) All as per specified and directed by Engr-in-Charge. |
| 8 | Material and labour for bituminious premix semi dense ashphaltic concrete,30 mm consolidated/ compacted thickness using Hot plant and machenical paver with 5.5% (paving bitumen VG 30 Gde) binder content by weight to total mix, rolled and compacted using 8-10 tone power road roller to require camber and gradient complete all as specified and as directed by Engr-in-Charge. |
| 9 | Material and labour for preparing bituminous surfaces of road and marking 1.5-2 mm thick centre lines, stop lines, dashes, arrows etc. width of 10cm or above on roads pavements with hot applied thermo plastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine all as manufactures instruction complete all as spcified and directed . |
| 10 | Taking down solar cat eye/cat eye solar reflective/speed breaker in any position fixed in road complete all as specified and directed by Engr-in-Charge. |
| 11 | Supply and fixing in reapirs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of Model Number DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions. |
| 12 | Supply and fix in repair solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 Watt, one NI-ed rechargeable battery (1.2V/ 1600 MA) consisting of six super bright LED with 10,000 mcd to 18,000 mcd completed as per manufacturers instructions etc. all as specified and directed with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 13 | Taking down speed breaker in any position fixed in road complete all as specified and directed by engr-in-charge. |
| 14 | Supply and fixing in repair speed breaker made of ABS material with two highly reflective reflectors moulded in PMMA material are welded with ABS plate through ultrasonic welding process and then fixed to on the speed breaker of size 750x250x75mm including surface to be make level as parential surfaces including dismantling/taking out of any type rusted/broken speed breaker complete all as specified and directed by engr-in-charge. Make: Dark eye,3M,Tata,BP,Road star. |
| 15 | Demolition of precast concrete articles like kerb stone built in cement mortar complete all as specified and directed by Engr-in-Charge. |
| 16 | Supply and fix providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and as directed. |
| 17 | Material and labour for preparation of new concrete surfaces of any description over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed |
| 18 | Material and labour for preparation of old painted concrete surfaces of any description over 10 cm girth or width and applying one coats of synthetic enamel paint over a coat of primer complete all as specified and as directed |
| 19 | Supply and fix in repairs retro-reflective sign board of size 1700 x 1200mm made out of 4mm acrylic sheet,face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting,letter,symbols,boards etc.will be as required colour scheme on the boards and with the high intensity grade A. the acrylic sheet to be riveted/fixed to S.S frame 25mm square tube. the boards will be fixed to 50mm dia SS pipe and 02 Nos 50mm dia vertical post of adequate height(min 1.5 m above GL and 0.45 m below GL) incl taking down existing complete in all respects as per direction of engineer-in-charge.Note 1: Excavation and filling with PCC 1:3:6 of size 200x200x450mm incl making good of existing area shall be included deemed in quoted rate. Note2: Design and pattern will be approved by engineer-in-charge at stage of execution. |
| 20 | Supply and fix in repairs 60cm dia convex mirror of polycarbonate lens with high visibility orange backing including 60mm dia pole of adequate height adjustable mounting brackets and heavy duty nut and bolts etc incl taking down of existing complete all as specified. Note: excavation and filling with PCC 1:3:6 of size 200x200x300mm incl making good of existing area shall be included in quoted rate. |
| 21 | Scarifying or picking graveeld, macadam or bitumious macadam surfaces exceeding 50mm deep and are not exc 100 mm deep area not exceeding 400 Sqm all as specified and directed. |
| 22 | Material and labour for n exc 75mm thick bituminous macadam laid/rolled and compacted to by using 8 to 10 tonne power road roller to required camber and gradient required gradient and camber ( consolidated thickness 75mm or less) using Hot mix plant & mechanical paver with @ 4% paving bitumen (VG-30 gde) binder content by weight of total mix,rolled and compacted by using 8 to 10 tonne power road roller to required camber and gradient complete all as specified and directed. Note: Soft stones such as lime stones,sandstone etc will not be allowed to be incorporated in the work. |
| 23 | Material and labour for preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with air compressor to remove all loose dirt and applying evenly a priming/ tack coat with bituminous primer @ 10 Kg per 10 Sqm of surface using paving bitumen complete. |
| 24 | Material and labour for preparing the black top bituminous surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with air compressor to remove all loose dirt and applying evenly a priming/ tack coat with bituminous primer @ 2.5 Kg per 10 Sqm of surface using paving bitumen complete. |
| 25 | Material and labour for laying and consolidating bituminious premixd asphaltic semi dense concrete,30 mm consolidated thickness with 5.5 % binder content by weight of total mix by using paving bitumen (VG-30 gde) any penetration rolled and compacted to required camber and gradient etc with mechanical paver and rolled with 8-12 tonne power roller and all as specified and as directed. |
| 26 | Supply and fix in repair solar delineator of 1000mm height made of polycarbonate and toughened body height 165mm, diameter 95mm comprises of 4 super LEDs which give 360 degree viewing ,solar panel-2.4V, 250MA(approx) 1.2V rechargeable battery -1No and mounted on MS pipe of 50mm outer dia duly powder coated with an anti theft wire mesh provided over it for extra protection (Model: DA 112 or techno commercially equivalent) all as specified and directed by engr-in-charge.(Note: excavation for bed block of size 150x150x200mm filling with concrete 1:3:6 and clearing of the area shall be included in the rate quoted) Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words : INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender