Defence Statutory Bodies & Commissions/Committees Closing in 2 days TDR #58361745

Tender For Addition/ Alteration And Improvement Including Replacement Of Corroded Water Pipe Line At construction Park Under Ge (U-Ii) Visakhapatnam

Issued by Statutory Bodies & Commissions/Committees · Visakhapatanam, Andhra Pradesh
Tender Value
44.90 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
2 days left
EMD
89800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Addition/ Alteration And Improvement Including Replacement Of Corroded Water Pipe Line At construction Park Under Ge (U-Ii) Visakhapatnam

BOQ

Name of Work:- ADDITION/ ALTERATION AND IMPROVEMENT INCLUDING REPLACEMENT OF CORRODED WATER PIPE LINE AT NIRMAN PARK UNDER GE (U-II) VISAKHAPATNAM
Sl. No. Item Description
1Supplying, laying, jointing, testing and commissioning of 200mm dia, class K-9, Ductile iron pipe (Conforming to IS: 8329-2000), Centrifugally Cast (Spun) Pressure Pipe with Socket and Spigot ends suitable for Push-on-Joint including jointing material, duly applied with Zinc Coating with finishing layer of Bitumen on external surfaces and Cement Motor Lining with Bituminous Seal Coat on internal surfaces, complete all as specified and as directed by Engineer-in-Charge.
2Supplying, laying, jointing, testing and commissioning of 150mm dia, class K-9, Ductile iron pipe (Conforming to IS: 8329-2000), Centrifugally Cast (Spun) Pressure Pipe with Socket and Spigot ends suitable for Push-on-Joint including jointing material, duly applied with Zinc Coating with finishing layer of Bitumen on external surfaces and Cement Motor Lining with Bituminous Seal Coat on internal surfaces, complete all as specified and as directed by Engineer-in-Charge.
3Material and Labour for DI fittings (Class K-12) suitable for DI spigot and socketed pipe of size from 150 mm to 300 mm bore and any type such as MJ Collar, Bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket/flanged etc), Tee pieces (single branch, \\"Y\\" junction, double branch, cross etc), collars, caps and plugs etc, complete all as specified and directed by Engineer-in-Charge.
4Taking down old rusted/unservicable GI pipe 80 mm dia including fittings/valves complete all as specified and directed by Engineer-in-Charge.
5Taking down old rusted/unservicable GI pipe 50 mm dia including fittings/valves complete all as specified and directed by Engineer-in-Charge.
6Taking down old rusted/unservicable GI pipe 25 mm dia including fittings/valves complete all as specified and directed by Engineer-in-Charge.
7Supply and laying/fixing of 3 layer (inner antimicrobial, outer UV stablised) ISI marked, IS 15801, PP-R pipes SDR 7.4 (PN-16) including PP-R plain/brass fittings in trenches/walls/ceiling or laying in floors complete of size outer dia 90 mm complete all as specified and directed by Engr-in-Charge
8Supply and laying/fixing of 3 layer (inner antimicrobial, outer UV stablised) ISI marked, IS 15801, PP-R pipes SDR 7.4 (PN-16) including PP-R plain fittings in trenches/walls/ceiling or laying in floors complete of size outer dia 63 mm complete all as specified and directed by Engr-in-Charge
9Supply and laying/fixing of 3 layer (inner antimicrobial, outer UV stablised) ISI marked, IS 15801, PP-R pipes SDR 7.4 (PN-16) including PP-R plain/brass fittings in trenches/walls/ceiling or laying in floors complete of size outer dia 32 mm complete all as specified and directed by Engr-in-Charge
10Taking down old rusted/unservicable sluice valve of 200 mm dia complete all as specified and directed by Engineer-in-Charge.
11Taking down old rusted/unservicable sluice valve of 150 mm dia complete all as specified and directed by Engineer-in-Charge.
12Supply and fix Cast Iron Rising Spindle Sluice Valve of size 200mm nominal bore, PN 1.6, as per IS : 14846 with flanged ends, hand wheel operated, stainless steel stem including necessary packing material, GI bolts, nuts and washers etc, complete all as specified and directed by Engineer-in-Charge.
13Supply and fix Cast Iron Rising Spindle Sluice Valve of size 150mm nominal bore, PN 1.6, as per IS : 14846 with flanged ends, hand wheel operated, stainless steel stem including necessary packing material, GI bolts, nuts and washers etc, complete all as specified and directed by Engineer-in-Charge.
14Supply and fix PP-R Gate valves (brass insert) suitable for 90 mm PP-R pipe, complete all as specified and directed by Enginee-in-Charge.
15Supply and fix PP-R Gate valves (brass insert) suitable for 63 mm PP-R pipe, complete all as specified and directed by Enginee-in-Charge.
16Supply and fix PP-R Gate valves (brass insert) suitable for 32 mm PP-R pipe, complete all as specified and directed by Enginee-in-Charge.
17Material and labour for cutting of existing bitumen road / foor/CC road / PCC hard standing up to 30 cm depth and 60 cm width for laying of pipe lines and making good the disturbed surfaces by providing PCC 1:2:4 type B-1 (using 20mm graded aggregate) after laying/fixing of pipes, complete all as specified and directed. Note:- Excavation beyond 30 cm depth shall be measured and separately .
18Material and labour for constructing valve chamber of internal dimensions 900mm x 900 mm x 1200 mm with 100 mm thick PCC (1:4:8 ) type D-2 for foundation, brick walls built in cement mortar (1:4 ), PCC 1:2:4 type B1 for coping , rendering in cement mortar 1:4, 15 mm thick internally and on exposed surfaces externally up to 15 cm above GL. Bottom PCC floor of the pit should be minimum 30 cms below the bottom surface of sluice valve flange to provide sufficient working space. The sluice valve and other fittings should be housed in center of the pit, the vertices of the pit should be in right angle and champhered .The top cover of the pit will be made out of 3mm MS sheet with angle iron frame made out of MS angle 50mm x 50 mm x 6 mm with MS hinges two Nos, and locking arrangements duly painted with two coats of water resistant synthetic enameled paint over one coat of red oxide primer, including demolition and taking out of existing broken valve chamber of any description, complete all as specified and directed by Engineer-in-Charge.
19Material and labour for constructing valve chamber of internal dimensions 1000 mm x1000mm x1200mm with 100 mm thick PCC (1:4:8 ) type D-2 for foundation, brick walls built in cement mortar (1:4 ), PCC 1:2:4 type B1 for coping , rendering in cement mortar 1:4, 15 mm thick internally and on exposed surfaces externally up to 15 cm above GL. Bottom PCC floor of the pit should be minimum 30 cms below the bottom surface of sluice valve flange to provide sufficient working space. The sluice valve and other fittings should be housed in center of the pit, the vertices of the pit should be in right angle and champhered .The top cover of the pit will be made out of 3mm MS sheet with angle iron frame made out of MS angle 50mm x 50 mm x 6 mm with MS hinges two Nos, and locking arrangements duly painted with two coats of water resistant synthetic enameled paint over one coat of red oxide primer, including demolition and taking out of existing broken valve chamber of any description, complete all as specified and directed by Engineer-in-Charge.
20Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep and getting out in any type soil for laying pipes etc, complete all as specified and directed by Engineer-in-Charge.
21Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, complete all as specified and directed by Engineer-in-Charge.
22Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed by Engineer-in-Charge.
23SCHEDULE OF CREDITNote :- Amount of Rs. 1,31,025.00 indicated in Tender Documents as Schedule of Credit shall be deducted from the total quoted amount of BOQ. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58361745
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 44.90 Lakhs
LAST DATE 24-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Addition/ Alteration And Improvement Including Replacement Of Corroded Water Pipe Line At construction Park Under Ge (U-Ii) Visakhapatnam
Basic Detail
Tender No 8219(A)
Bidding Type Tender
Location
City Visakhapatanam
State Andhra Pradesh
Key Dates
Publish Date 03 Nov 2026
Submission Date 24 Nov 2026
Open Date 25 Nov 2026
Finance
Tender Value 44.90 Lakhs
Tender Fee 500
EMD 89800
Exemption Available
Document List
4956761f-78cd-4360-b15d-10d4445f4ada.html
8219_Tender.pdf
BOQ_894055.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 03, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

4956761f-78cd-4360-b15d-10d4445f4ada.html

pdf

8219_Tender.pdf

xls

BOQ_894055.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender