Tender For Improvements To Road From Dommasandra To Muttanallur Cross Via Kodati, J.H.C, Wipro S.E.Z, Ambedkar Colony, Mullur, Ravishankar Vidyamandira, Sulikunte Colony From Km 1.50 To Km 6.51 (Selected Reaches) In Bengaluru East Taluka, Bengaluru U
Tender Overview
Project Description
Tender for Improvements To Road From Dommasandra To Muttanallur Cross Via Kodati, J.H.C, Wipro S.E.Z, Ambedkar Colony, Mullur, Ravishankar Vidyamandira, Sulikunte Colony From Km 1.50 To Km 6.51 (Selected Reaches) In Bengaluru East Taluka, Bengaluru Urban District. (Job No:Crif-Knt-2026-27-055)
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned including removal and disposal of top organic soil not exceeding 150 mm in thickness including all labour, usage charges of with all lead, lift, loading, unloading, transportation, machinery etc., complete. (ii) (A) By Mechanical Means in Light Jungle using Dozer and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. |
| 2 | Surface Drain in Soil (New): Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankment including with all lead, lifts, loading, unloading, transporatation, all labour, usage charges of all machinery etc., complete Mechanical means and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. |
| 3 | Excavaton in soil using Hydraulic Excavator and Tippers with Disposal: Excavation for roadwrk in soil by hydraulicexcavator including cutting and loading in tippers, trimming bottom ans side slopes, in accordance with requirements of lines, grades and cross sections and transporting to the embankment location, with all lifts and lead, including all labour, load, unload, usage charges of all machinery etc, completeand as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. . |
| 4 | Construction of Embankment with Material Deposited from Roadway Cutting: Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. laid in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross section including watering, spreading, grading by motor grader and consolidation by roller with desired field density not less than 95% of maximum dry density , including all lead, lifts, loading, unloading, transportation, all labour, usage charges of all machinery etc., complete, and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. |
| 5 | Construction of Embankment with Material obtained from Borrow pits: Construction of embankment with approved material obtained from borrow pits laid in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross section including watering, consolidation by roller to the desired field density not less than 95% of maximum dry density including all lead, lifts, loading, unloading, transportation all labour, usage charges of all machinery etc., complete as per table 300-2, and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. |
| 6 | Granular Sub-Base with Close/Coarse Graded Material (Table:- 400-1) Plant mix method: Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 including protection of edges of GSB layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts, transportation etc., complete (Compacted thickness) Grading-II Material (Close graded) and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. As per job mix. |
| 7 | Wet Mix Macadam (Plant Mix Method): Providing laying, spreading and compacting of graded stone aggregates as per Table 400-12 & 400-13, to wet mix maacadam specification including premixng the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to work site , laying in uniform layers in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density of 98% including protection of edges of WMM layer, cost of all materials, labour, usage charges of machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading, all lead and lift etc., complete (Compacted Thickness) Laying using Grader and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. As per Mix design. |
| 8 | Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 bitumen emulsion complying IS-8887 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. as per table-500-3, including cost of all materials, labour, usage charges of all machinery, with all lead, lift, loading & unloading etc., complete, as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. |
| 9 | Tack coat on Granular surfces: Providing and applying tack coat with bitumen emulsion (RS1) using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared granular surface cleaned with mechanical broom & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, with all lead, lift, loading & unloading etc., complete, and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. |
| 10 | Tack coat on Bituminous surfces: Providing and applying tack coat with VG 10 grade bitumen using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, with all lead, lift, loading & unloading etc., complete, and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. |
| 11 | Dense Graded Bituminous Macadam Grading -II: Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc., complete, and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. (50-75mm compacted thichness). As per job mix. NOTE: Protection of Dense Graded Bituminous Macadam layer is as per Clause 504.5 of MoRT&H specfification for roads and Bridge work Vth revision |
| 12 | Bituminous Concrete Grading-II: Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler @2% by weight of agreegate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc., (30-40 mm compacted thickness) and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. charges. As per job mix. |
| 13 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffic control, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. |
| 14 | Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer, and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. |
| 15 | Retro-reflectorised traffic signs: Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.90 mtrs), 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete 60 cm equilateral triangle, and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. |
| 16 | _do_ 60 cm Circular |
| 17 | _do_80 cmX 60 cm rectangular |
| 18 | Kilometre Stone: Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing letters etc., including cost of all materials all labour, lead, lifts, loading, usage charges of machinery, unloading transporting etc., complete. and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. Ordinary kilometer stone (precast). |
| 19 | _do_200 meter stone (precast). |
| 20 | Construction of sub-grade and Earthen shoulders: Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 laid in layers not exceeding 250 mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., speading, grading by motor grador, consolidation by roller including all lead, lifts, loading, unloading, all labour, usage charges of machinery etc., complete. (New road formation) and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. |
| 21 | Providing and erecting Project Display Board of size 1.80 verticalx1.60M Horizontal made of Cold Rolled Coil Sheet 16 Guage (1.6mm thickness) sheeting sthrenghtened by welding to MS angle of size 35x35x5mm iron framework on all sides, extra cross vertical angle fixed using nuts and bolts, base of the board shall be cleaned, applying red oxide and black paint by sprayer on both sides of the board and all MS iron frameworks, background of the facing side of the board painted in traffic yellow, project information written in English/Kannada/Hindi, painting letters and numerals in black, fixed on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level and the board 2.8M from ground level as per approved drawing including cost of lettering including cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete. and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. |
| 22 | Direction and place identification signs with more than 0.9 Sqm Size Board: Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4mm with area not exceeding 0.9 sqm fixed over back support frame of min 40 x 40 x 5mm MS Angle mounted on two nos of mild steel circular pipe 65 NB 3.20 mm thickness, 4.5 mtrs total hight, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing, finishing neatly, including supplying to site of work, curing, concrete work, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete. and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. |
| 23 | Chevron Boards. Supply and installation of retro- reflective Chevron signboardsof 600x450mm made out of cube corner micro prismatic grade sheeting confirming to Type XI standards of IRC:67:2022 & ASTM D 4956-09 specification & fixed over 3 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm thick aluminum skin on both sides & fixed over back support frame of 25x25x3mm MS angle frame. Supported on 75 mm dia OR 75x75x6mm Mild steel with clear height of not less than 2.1 m from the ground level to the bottom of the Sign board & 60 cm below ground level. The sign post should be painted with one coat of red oxide paint and two coats of synthetic enamel paint of black and white colour with bands of 30 cm height, firmly fixed to the ground by means of foundation with M 20 grade cement, concrete foundation size of 45 cm x 45 cm x 60 cm including cost & conveyance of all materials, equipment, machinery & Labour with all leads and lifts for satisfactory completion of the work as directed by Engineer incharge, and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. |
| 24 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material, including all labour, usage charges of machinery, with all lead, lifts, loading, unloading transporting etc., complete. Ordinary soil Mechanical Means, and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. |
| 25 | PCC 1:3:6 in Foundation: Providing & laying Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregates 40mm nominal size mechanically mixed, placed in foundation and compated by vibration including curing, including cost of all materials all labour, usage charges of machinery, lead, lifts, loading, unloading transporting etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. As per Mix design. |
| 26 | Providing & laying Plain/Reinforced Cement Concrete in open foundation complete as per drawing & tecnical specification for Pipe Culvert complete as per Drawing and Technical Specifications, including cost of all materials, formwork, centering, vibrating, compacting, all labour, usage charges of machinery, lead, lifts, loading, unloading transporting, stacking, curing, finishing the exposed faces etc., complete. - RCC Grade M20 using batching plant transit mixer & concrete pump, complete and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. As per Mix design. |
| 27 | Providing & laying Plain/Reinforced Cement Concrete in open foundation complete as per drawing & tecnical specification for Pipe Culvert complete as per Drawing and Technical Specifications, including cost of all materials, formwork, centering, vibrating, compacting, all labour, usage charges of machinery, lead, lifts, loading, unloading transporting, stacking, curing, finishing the exposed faces etc., complete. - RCC Grade M25 using batching plant transit mixer & concrete pump, complete and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. As per Mix design. |
| 28 | Providing and laying 100mm thick pre-cast cover slabs over Road side drains /utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 550 @ 6kg/ m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs herever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead, lift, loading, unloading, trasnportation charges etc, Complete. and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. |
| 29 | Supplying, Fitting and Placing un-coated TMT Fe-500 grade bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. including straightening bar, cutting, bending, hooking binding with approved quality binding wire, after placing in position, tying, lapping and/or welding whereever required (laps, hooks 7 wastages shall not be measured & paid) incluidng cost of all materials, fabrication charges, all labour, material, usage charges of machinery, lead, lifts, loading, unloading, stacking, transporting etc., complete, and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. |
| 30 | Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia PVC pipe, 110 mm dia at 4 kg/sqcm fixing with glue extending through the full width of the structure with slope of 1V :20H towards drawing foce, including cost of all materials curing all labour, material, usage charges of machinery, lead, lifts, loading, unloading, transporting, etc., complete. as per drawing and Technical Specifications. complete, and as per the direction of the Engineer-In-Charge for successful completion of work and all other incidental charges. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender