Road Transport and Highways Government Departments Closing in 0 days TDR #58361611

Tender For Improvements To Road From Serva Circle To Kenchayyandoddi Via Yalchipalya And Aralalusandra Village To Ramanagara Border (Kadanakuppe) In Channapatna Taluk, Bengaluru South District.(Crif-Knt-2026-27-015)

Issued by Government Departments · Ramanagara, Karnataka
Tender Value
4.85 Crore
Estimated cost
Bid Submission
19 Nov 2026
0 days left
EMD
7.29 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ramanagara → Karnataka
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Improvements To Road From Serva Circle To Kenchayyandoddi Via Yalchipalya And Aralalusandra Village To Ramanagara Border (Kadanakuppe) In Channapatna Taluk, Bengaluru South District.(Crif-Knt-2026-27-015)

BOQ

Name of Work:- Improvements to road from Serva circle to Kenchayyandoddi via Yalchipalya and Aralalusandra village to Ramanagara Border (Kadanakuppe) in Channapatna Taluk, Bengaluru South District.(CRIF-KNT-2026-27-015)
Sl. No. Item Description
1Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials by (tractor) and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness including lead, lift, unloading, loading, all labour,material, usage charges of all machineries etc., and with all other incidental chagres complete. By Mechanical Means.In area of Light jungle and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
2Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankment, including all lead, lifts, loading, unloading, all labour, material, usage charges of all machinery and with all other incidental chagres etc., and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
3Excavation for roadwork in soil by hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location, , including all lead, lifts, loading, unloading, all labour, material, usage charges of all machinery and with all other incidental chagres etc., and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
4Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2.laid in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross section including watering, spreading, grading by motor grader and consolidation by roller with desired field density not less than 95% of maximum dry density including all lead, lifts, loading, unloading, all labour,material,transportaion, usage charges of all machinery and with all other incidental chagres etc., complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
5Construction of embankment with approved material obtained from borrow pits laid in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross section including watering, consolidation by roller to the desired field density not less than 95% of maximum dry density including all lead, lifts, loading, unloading, all labour,material,transportaion, usage charges of all machinery and with all other incidental chagres etc., complete as per table 300-2.Construction of Embankment with Material obtained from Borrow pits and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
6Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 including protection of edges of GSB layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts all labour,material,transportaion, usage charges of machinery and with all other incidental chagres etc., complete .Grading-II Material (Close graded). and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work. As per job mix
7Providing, laying, spreading and compacting graded stone aggregate as per table 400-12 & 400-13, to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density of 98% including protection of edges of WMM layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road,transportation, loading & unloading all lead, lifts and with all other incidental chagres etc., complete, Laying Using Grader and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.As per job mix
8Providing and applying primer coat with SS1 bitumen emulsion complying IS-8887 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.as per table-500-3, including cost of all materials, labour, usage charges of all machinery,lead ,lift, loading & unloading, transportation and with all other incidental chagres etc., complete and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
9Providing and applying tack coat with bitumen emulsion(RS1) using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared granular surface cleaned with mechanical broom & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, lead, lift, loading & unloading, transportation and with all other incidental chagres etc., complete .Tack Coat on Granular surfaces treated with primer and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
10Providing and applying tack coat with VG-10 grade bitumen using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom, & dusting by air compressor and sprayingincluding cost of all materials, labour, usage charges of all machinery, lead, lift, loading & unloading, transportation and with all other incidental chagres etc., complete complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
11Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting and with all other incidental chagresetc., complete, 50-75 mm compacted thickness.Grading -II and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work. as per job mixNote:protection of dense graded Bituminous Macadam layer is as per clause 504.5 of MORTH specification for roads and bridges work Vth revision.
12Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler @2% by weight of agregate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting and with all other incidental chagres etc., complete, except lead for bitumen, with a lead of mixed material upto 1 km, excluding cost of primer/ tack coat - 30-40 mm compacted thickness.Grading -II and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
13Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffic control,cost of all materials all labour, lead, lifts, loading, unloading transporting and with all other incidental chagres etc., complete.Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
14Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside,without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
15Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.30 mtrs), 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, as per clauses including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting and with all other incidental chagres etc.,and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work. a) 60cm equilateral triangle
16_do_b)60 cm circular
17_do_c)80 cm x 60 cm rectangular
18Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing letters etc., including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting and with all other incidental chagres etc.,and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work. a) Ordinary kilometer stone (precast)
19_do_b) 200 metre stone (precast)
20Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 laid in layers not exceeding 250 mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., spreading, grading by motor grador, consolidation by roller including all lead, lifts, loading, unloading, all labour,material,transportation, usage charges of machinery and with all other incidental chagres etc., complete.and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
21Providing and erecting Project Display Board of size 1.80 verticalx1.60M Horizontal made of Cold Rolled Coil Sheet 16 Guage (1.6mm thickness) sheeting sthrenghtened by welding to MS angle of size 35x35x5mm iron framework on all sides, extra cross vertical angle fixed using nuts and bolts, base of the board shall be cleaned, applying red oxide and black paint by sprayer on both sides of the board and all MS iron frameworks, background of the facing side of the board painted in traffic yellow, project information written in English/Kannada/Hindi, painting letters and numerals in black, fixed on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level and the board 2.8M from ground level as per approved drawing (including cost of lettering)including cost of all materials all labour, lead, lifts, loading, unloading transporting and with all other incidental chagres etc., complete and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
22Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4mm with area exceeding 0.9 sqm fixed over back support frame of min 40x40x5mm Angle mounted on 2no.of mild steel circular pipe 65 NB 3.20 mm thick, 4.5mtrs hight, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing, finishing neatly, including supplying to site of work including curing concrete, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., and with all other incidental chagres complete.Direction and Place Identification Signs upto 0.9 sqm Size Board and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
23Supply and installation of retro- reflective Chevron signboards of 600x450mm made out of cube corner micro prismatic grade sheeting confirming to Type XI standards of IRC:67:2022 & ASTM D 4956-09 specification & fixed over 3 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm thick aluminum skin on both sides & fixed over back support frame of 25x25x 3mm MS angle frame. Supported on 75 mm dia OR 75x75x6mm Mild steel with clear height of not less than 2.1 m from the ground level to the bottom of the Sign board & 60 cm below ground level. The sign post should be painted with one coat of red oxide paint and two coats of synthetic enamel paint of black and white colour with bands of 30 cm height, firmly fixed to the ground by means of foundation with M 20 grade cement, concrete foundation size of 45 cm x 45 cm x 60 cm including curing concrete, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., and with all other incidental chagres complete and and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
24Earth work excavation for Ordinary soil byMechanical Means using Hydraulic excavator (Depth upto 3 m) for foundation structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work including all labour, usage charges of machinery, lead, lifts, loading, unloading transporting and with all other incidental chagres etc., complete and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
25Providing & laying Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregates 40mm nominal size mechanically mixed, placed in foundation and compated by vibration including curing, including all labour, usage charges of machinery, lead, lifts, loading, unloading transporting and with all other incidental chagres etc., complete and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
26Providing & laying Plain/Reinforced Cement Concrete in open foundation complete as per drawing & tecnical pecification for Pipe Culvert complete as per Drawing and Technical Specifications, including cost of all materials, formwork, centering, vibrating, compacting,all labour, usage charges of machinery, lead, lifts, loading, unloading transporting, stacking, curing, finishing the exposed faces etc., and with all other incidental chagres etc., complete. (excluding cost of steel and fabrication charges) RCC Grade M20 using batching plant transit mixer & Concrete pump and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
27Providing & laying Plain/Reinforced Cement Concrete in open foundation complete as per drawing & technical specification for Pipe Culvert complete as per Drawing and Technical Specifications, including cost of all materials, formwork, centering, vibrating, compacting,all labour, usage charges of machinery, lead, lifts, loading, unloading transporting, stacking, curing, finishing the exposed faces etc., with all other incidental chagres complete. (excluding cost of steel and fabrication charges) RCC Grade M25 using batching plant transit mixer & Concrete pump
28Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 550 @ 6kg/ m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc,with all other incidental chagres completeand complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
29Supplying, Fitting and Placing un-coated TMT Fe-500 grade bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. including straightening bar, cutting, bending, hooking binding with approved quality binding wire, after placing in position, tying, lapping and/or welding whereever required ( laps, hooks 7 wastages shall not be measured & paid) incluidng cost of all materials, fabrication charges, all labour, material, usage charges of machinery, lead, lifts, loading, unloading, stacking, transporting etc., with all other incidental chagres completeand complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work.
30Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with extending through the full width of the structure with slope of 1V :20H towards drawing face, including cost of all materials curing all labour, material, usage charges of machinery, lead, lifts, loading, unloading, transporting, and with all other incidental chagres etc., complete. as per drawing and Technical Specifications.Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall and complete as per specification and as per the direction of the Engineer-In-Charge for successful completion of work. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58361611
AUTHORITY Government Departments
TENDER VALUE 4.85 Crore
LAST DATE 19-11-2026
Authority
Authority Name Ministry Of Road Transport And Highways
Work Description Tender for Improvements To Road From Serva Circle To Kenchayyandoddi Via Yalchipalya And Aralalusandra Village To Ramanagara Border (Kadanakuppe) In Channapatna Taluk, Bengaluru South District.(Crif-Knt-2026-27-015)
Basic Detail
Tender No NIT 17 2026 27 dated 31.10.2026
Bidding Type Tender
Location
City Ramanagara
State Karnataka
Key Dates
Publish Date 03 Nov 2026
Submission Date 19 Nov 2026
Open Date 21 Nov 2026
Finance
Tender Value 4.85 Crore
Tender Fee 11800
EMD 7.29 Lakhs
Exemption Not Available
Document List
BOQ_980336.xls
ff71d520-0f0f-4d57-bedc-4f345f64aeb6.html
KW4015.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 03, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 19, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Nov 21, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_980336.xls

html

ff71d520-0f0f-4d57-bedc-4f345f64aeb6.html

pdf

KW4015.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender