Tender For Maintenance Of Borough Health Center For Room Modification For Installation Of Air Conditioner In Cold Chain Room With Various Civil Works Under Borough -Xiii,In Ward No-119
Tender Value
2.11 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
3 days left
EMD
4300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Borough Health Center For Room Modification For Installation Of Air Conditioner In Cold Chain Room With Various Civil Works Under Borough -Xiii,In Ward No-119
BOQ
| Sl. No. | Item Description |
| 1 | BUILDING WORKS. (T)MISCELLANEOUS WORKS: B.MAINTENANCE WORKS : 10)Uprooting and removing plants fromthe surface of walls parapet etc and making good damages.(Repairing of damages to be paid separately). (a) Small plant of girthof exposed stem upto 75 mm. lift upto 6 mtr. Note : For lift beyondinitial 6 mtr. the rate will be increased @ 20% for each additional lift if6 mtr. or part thereof. |
| 2 | BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLESETC 10. Stripping off worn out plaster and raking out joints of walls,celings etc. upto any height and in any floor including removingrubbish within a lead of 75m as directed. |
| 3 | SECTION 1. ------------BUILDING WORKS (I) PLASTERING,POINTING ETC. A. ORIGINAL WORKS 1.Plaster (to wall, floor,ceiling etc.) with sand and cement mortar including rounding off orchamfering corners as directed and raking out joints includingthroating, nosing and drip course, scaffolding/staging wherenecessary (Ground floor).[Excluding cost of chipping over concretesurface](ii) With 1:4 cement mortar (b) 15 mm thick plaster |
| 4 | SECTION 1. ------------BUILDING WORKS (I) PLASTERING,POINTING ETC. A. ORIGINAL WORKS 1.Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off orchamfering corners as directed and raking out joints includingthroating, nosing and drip course, scaffolding/staging wherenecessary (Ground floor).[Excluding cost of chipping over concretesurface](ii) With 1:4 cement mortar (c) 10 mm thick plaster |
| 5 | SECTION 1. ------------BUILDING WORKS (J)WHITE WASH,COLOUR WASH, DISTEMPER B. MISCELLANEOUS ITEMSRounding corners with cement mortar (1:3) for crack repairs |
| 6 | BUILDING WORKS (D) Flooring A. ORIGINAL WORKS 35.Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floorsto match with the existing work & 4 nos. of key stones (10mm) fixedwith araldite at the back of each tile & finishing the joints with whitecement mixed with colouring oxide if required to match the colour oftiles includingroughening of concrete surface, if necessary or by synthetic adhesive& grout materials etc. (B) Wall. With Sand Cement Mortar (1:3) 15mm thick & 2 mm thick cement slurry at back side of tiles usingcement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloureddecorative. Note: 2. Add extra for each addl, floor over the rate foritem 35 & 36 of subhead A. (i) upto 4 th floor-Rs 5/ Sq.m (i) above 4th floor-Rs 6.25/ Sq.m |
| 7 | BUILDING WORKS(R) ALUMINIUM WORKS???(1)Supplying profilesof required section made of Aluminium Alloy Extrusions conforming toIS: 732-1983 and IS: 1285- 1975; Annodized (with required filmthickness and specified colour / natural) matt finished conforming toIS: 1868-1983 for fabrication of composit door, sliding & casementwindows, partitions, formed of basic sections of any ISI embossed /certified make and brand as per direction of Engineer - In-Charge.(Payment will be made on finished length of the work).(A) In 10-12Micron thickness Annodizing film. I) Natural white.a) 2- track slidingwindow.i) Bottom frame. |
| 8 | BUILDING WORKS(R) ALUMINIUM WORKS???(1)Supplying profilesof required section made of Aluminium Alloy Extrusions conforming toIS: 732-1983 and IS: 1285- 1975; Annodized (with required filmthickness and specified colour / natural) matt finished conforming toIS: 1868-1983 for fabrication of composit door, sliding & casementwindows, partitions, formed of basic sections of any ISI embossed /certified make and brand as per direction of Engineer - In-Charge.(Payment will be made on finished length of the work).(A) In 10-12Micron thickness Annodizing film. I) Natural white.(a) 2- track slidingwindow.ii) Top and side frame. |
| 9 | BUILDING WORKS(R) ALUMINIUM WORKS???(1)Supplying profilesof required section made of Aluminium Alloy Extrusions conforming toIS: 732-1983 and IS: 1285- 1975; Annodized (with required filmthickness and specified colour / natural) matt finished conforming toIS: 1868-1983 for fabrication of composit door, sliding & casementwindows, partitions, formed of basic sections of any ISI embossed /certified make and brand as per direction of Engineer - In-Charge.(Payment will be made on finished length of the work).(A) In 10-12 Micron thickness Annodizing film. I) Natural white. d) Shutter for alltrack sliding window. i) Bottom & Top member. |
| 10 | BUILDING WORKS(R) ALUMINIUM WORKS???(1)Supplying profilesof required section made of Aluminium Alloy Extrusions conforming toIS: 732-1983 and IS: 1285- 1975; Annodized (with required filmthickness and specified colour / natural) matt finished conforming toIS: 1868-1983 for fabrication of composit door, sliding & casementwindows, partitions, formed of basic sections of any ISI embossed /certified make and brand as per direction of Engineer - In- Charge.(Payment will be made on finished length of the work).(A) In 10-12Micron thickness Annodizing film. I) Natural white. d) Shutter for alltrack sliding window. ii) Style side member |
| 11 | BUILDING WORKS (K) PAINTING, VERNISHINGETC?(B)MISCELLANEOUS ITEMS.(1)Removing loose scales,blisters etc. from old painted surface and thoroughly smoothening thesurface to make the same suitable for receiving fresh coat ofpaint.N.B:(Payment against item (1, 2, 3, 4) of subhead B will bemade only when done at specific direction of the Engineer- in-charge.Cost of taking out shutter etc.for this item and rehanging the same orchanging glass panes cracked or broken in the operation will bedeemed to be covered by the rate of this item and no seperatepayment therefore shall be made.) |
| 12 | SECTION 1. ------------BUILDING WORKS (K) PAINTING,VERNISHING ETC A. ORIGINAL WORKS 2 (A) Painting with bestquality synthetic enamel paint of approved makeand brand includingsmoothening surface by sand papering etc. including using ofapproved putty etc. on the surface, if necessary : With other thanhi-gloss of approved quality-(i) One coat (white in shade) |
| 13 | BUILDING WORKS(R) ALUMINIUM WORKS??(9)Supplying bubblefree float glass of approved make and brand conforming to IS:2835-1987. ii) 4mm thick coloured / tinted / smoke glass. |
| 14 | BUILDING WORKS(R) ALUMINIUM WORKS???(1)Supplying profilesof required section made of Aluminium Alloy Extrusions conforming toIS: 732-1983 and IS: 1285- 1975; Annodized (with required filmthickness and specified colour / natural) matt finished conforming toIS: 1868-1983 for fabrication of composit door, sliding & casementwindows, partitions, formed of basic sections of any ISI embossed /certified make and brand as per direction of Engineer - In-Charge.(Payment will be made on finished length of the work).(A) In 10-12Micron thickness Annodizing film. I) Natural white. d) Shutter for alltrack sliding window. iii) Interlock member |
| 15 | BUILDING WORKS(R) ALUMINIUM WORKS???(1)Supplying profilesof required section made of Aluminium Alloy Extrusions conforming toIS: 732-1983 and IS: 1285- 1975; Annodized(with required filmthickness and specified colour / natural) matt finished conforming toIS: 1868-1983 for fabrication of composit door, sliding &casementwindows, partitions, formed of basic sections of any ISI embossed /certified make and brand as per direction of Engineer - In-Charge.(Payment will be made on finished length of the work).(A) In 10-12Micron thickness Annodizing film. I) Natural white. k) Movable door shutter. ii) Shutter :Bottom rail. |
| 16 | BUILDING WORKS(R) ALUMINIUM WORKS???(1)Supplying profilesof required section made of Aluminium Alloy Extrusions conforming toIS: 732-1983 and IS: 1285- 1975; Annodized(with required filmthickness and specified colour / natural) matt finished conforming toIS: 1868-1983 for fabrication of composit door, sliding &casementwindows, partitions, formed of basic sections of any ISIembossed /certified make and brand as per direction of Engineer - In-Charge.(Payment will be made on finished length of the work).(A) In 10-12Micron thickness Annodizing film. I) Natural white. k) Movable doorshutter. ii) Shutter :Top rail |
| 17 | BUILDING WORKS(R) ALUMINIUM WORKS???(1)Supplying profilesof required section made of Aluminium Alloy Extrusions conforming toIS: 732-1983 and IS: 1285- 1975; Annodized(with required filmthickness and specified colour / natural) matt finished conforming toIS: 1868-1983 for fabrication of composit door, sliding & casementwindows, partitions, formed of basic sections of any ISI embossed /certified make and brand as per direction of Engineer - In-Charge.(Payment will be made on finished length of the work).(A) In 10-12Micron thickness Annodizing film. I) Natural white. k) Movable doorshutter.i) Door frame. (Top & sides). |
| 18 | BUILDING WORKS(R) ALUMINIUM WORKS??(2)Labour charge forfabrication and installation of composite door,window, partitions made from annodized extruded alloy aluminiumsections for the following units:-(A) Glazed aluminium sliding windows made of extruded andannodizedalloy aluminium sectios, fabrications, including cutting to propershapeand size, drilling and aligning of window shutter frame fitted with inbuiltlocking arrangements, sliding rollers and other necessary fittings,fixture,adhesives and joineries along with extruded neoprine or EPDMgasketing in between window frame and masonry work (walls,column,beam.lintels etc.) as well as between glass and shutter frame forfixingglass and Polysulphide sealant and in between shutter and windowframewhere necessary including cutting to requisite size and fixing glass asper drawing, specification and direction of EIC.The rate includes the hire charge of all tools and plants, including allincidental charges, adhesive, joineries such as screw, cleat angle etc.butexcluding the cost of extruded aluminium sections, glass, neoprene /EPDM gasket, locking arrangement and rollers. i ) 2 track slidingwindow.Note: Add extra for each Addl. Floor over the rate of item 2A,2B, 2Cand 2D except 2A(vi)i) Upto 4th Floor Rs.12.00 per Sq.m ii) Above 4th Floor Rs.16.00 per Sq.m |
| 19 | BUILDING WORKS(R) ALUMINIUM WORKS???(1)Supplying profilesof required section made of Aluminium Alloy Extrusions conforming toIS: 732-1983 and IS: 1285- 1975; Annodized (with required filmthickness and specified colour / natural) matt finished conforming toIS: 1868-1983 for fabrication of composit door, sliding & casementwindows, partitions, formed of basic sections of any ISI embossed /certified make and brand as per direction of Engineer - In-Charge.(Payment will be made on finished length of the work).(A) In 10-12Micron thickness Annodizing film. I) Natural white. k) Movable doorshutter. ii) Shutter :Lock rail |
| 20 | BUILDING WORKS(R) ALUMINIUM WORKS??(9)Supplying bubblefree float glass of approved make and brand conforming to IS:2835-1987. vi) 6mm thick coloured / tinted / smoke glass. |
| 21 | BUILDING WORKS(R) ALUMINIUM WORKS??(2)Labour charge forfabrication and installation of composite door,window, partitions made from annodized extruded alloy aluminiumsections for the following units:-(B) Partly glazed partly panelled orfully glazed single leaf alunminiumswing door made of extruded and annodized alloy aluminiumsections,fabrication including cutting to proper shape and size, drilling andaligning, fitted with heavy duty hydraulic action floor sping placed inthefloor with mending damages,with top pin assembly of approve makeandbrand, fitted with in built locking arrangement, flush bolt, glazing clipsand all other necessary fittings, fixtures, adhesives and joineries,cuttingglass of approved make to requisite shape and size fitting with dry setneoprene or EPDM gasketing, cutting to requisite shape and sizepanelboard (prelaminated particle block) fixing them with glazing clips asperdrawing, specification and direction of Engineer in charge.The rateincludes the hire charge of all tools and plants, adhesive,joineries such as screw, cleat angle etc. but excluding the cost ofextrudedalumium sections, glass, panel boards neoprene / EPDM gasket,lockingarrangement, weather gasket / wool pile, floor spring, top pin, handle,tower bolt, glazing clips etc. (10% rate reduction has to be made forswing doors or partitions where floor sping is not used. 10%enhancement of rate is to be made where door frame of extrudedaluminium sections has to be fitted and fixed to masonry wall. 5% rateenhencement may be allowed for double leaf swing door. Paymentshallbe made for the shutter area only exept where door frame is fixed theentire opening shall be taken to consideration.Payment for door framesections are to be paid seperately).Note: Add extra for each Addl Floor over the rate of item 2A, 2B, 2Cand 2D except 2A(vi)i) Upto 4th Floor Rs.12.00 per Sq.mii) Above 4th Floor Rs.16.00 per Sq.m |
| 22 | BUILDING WORKS(R) ALUMINIUM WORKS???(1)Supplying profilesof required section made of Aluminium Alloy Extrusions conforming toIS: 732-1983 and IS: 1285- 1975; Annodized(with required filmthickness and specified colour / natural) matt finished conforming toIS: 1868-1983 for fabrication of composit door, sliding & casementwindows, partitions, formed of basic sections of any ISI embossed /certified make and brand as per direction of Engineer - In-Charge.(Payment will be made on finished length of the work).(B) 15 Microncolour annodizing. g) Fixed glazing. i) Top, bottom and side member |
| 23 | BUILDING WORKS(R) ALUMINIUM WORKS???(1)Supplying profilesof required section made of Aluminium Alloy Extrusions conforming toIS: 732-1983 and IS: 1285- 1975; Annodized (with required filmthickness and specified colour / natural) matt finished conforming toIS: 1868-1983 for fabrication of composit door, sliding & casementwindows, partitions, formed of basic sections of any ISI embossed /certified make and brand as per direction of Engineer - In- Charge.(Payment will be made on finished length of the work).(A) In 10-12Micron thickness Annodizing film. I) Natural white. i) Fixed partitions.(Unsupported length of vertical member upto 1.5 mtr. Height of bothends of vertical member restrained but panels within 0.9 sq.m.) ii)Intermediate member |
| 24 | BUILDING WORKS(R) ALUMINIUM WORKS???(1)Supplying profilesof required section made of Aluminium Alloy Extrusions conforming toIS: 732-1983 and IS: 1285- 1975; Annodized(with required filmthickness and specified colour / natural) matt finished conforming toIS: 1868-1983 for fabrication of composit door, sliding & casementwindows, partitions, formed of basic sections of any ISI embossed /certified make and brand as per direction of Engineer - In-Charge.(Payment will be made on finished length of the work).(B) 15 Microncolour annodizing. i) Fixed partitions.(Unsupported length of vertical member upto 1.5 mtr. Height of bothends of vertical member restrained but panels within 0.9 sq.m.) iii)Glazing clip. |
| 25 | BUILDING WORKS(R) ALUMINIUM WORKS??(2)Labour charge forfabrication and installation of composite door,window, partitions made from annodized extruded alloy aluminiumsections for the following units:-(D) Partly glazed and partly panelledpartition or fixed glazing made ofextruded and anodised alloy aluminium sections, fabrications aftercutting to proper shape and size, drilling and aligning fitted with inbuiltlocking arrangement cutting the glass / board (prelaminated / particle/block) to requisite shape and size moulding the edges fitted and fixedglazing clips and dry set neoprine /EPDM gasket, along with all othernecessary arrangements for fixing the partition to walls, floors,beams,columns polysulphide sealant for water proofing if necessary complete inall respect as per drawing and specifications and direction of theEngineer in charge.The rate includes the hire charge of all tools and plants, adhesive,joineries such as screw, fastener but excluding the cost of extrudedaluminium sections, EPDM gasket, glass, board, glazing clips, lockingarrangement, etc. I) For partitions using section of size: a) 63.50 mmx 38.10 mm Note: Add extra for each Addl. Floor over the rate of item2A, 2B, 2Cand 2D except 2A(vi)i) Upto 4th Floor Rs.12.00 per Sq.mii) Above 4th Floor Rs.16.00 per Sq.m |
| 26 | SECTION 1. ------------BUILDING WORKS (J)WHITE WASH,COLOUR WASH, DISTEMPER B. MISCELLANEOUS ITEMS 5(a)Rendering the Surface of walls and ceiling with White Cementbase WATER PROOF wall putty of approved make & brand.(1.5 mmthick) |
| 27 | SECTION 1. ------------BUILDING WORKS (K) PAINTING,VERNISHING ETC A. ORIGINAL WORKS 1 (b) Priming one coat ontimber or plastered surface with synthetic oil bound primer ofapproved quality including smoothening surfaces by sand paperingetc. (This item is applicable to new work or old work when the originalsurface has been exposed by removal of old paint.) |
| 28 | SECTION 1. ------------BUILDING WORKS (K) PAINTING,VERNISHING ETC A. ORIGINAL WORKS 2 (A) Painting with bestquality synthetic enamel paint of approved make and brand includingsmoothening surface by sand papering etc. including using ofapproved putty etc. on the surface, if necessary :(a) On timber orplastered surface :With super gloss (hi-gloss) -(iv) Two coats (withany shade except white) |
| 29 | Sub Total |
| 30 | GST 18% |
| 31 | CESS 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender