Tender For Construction Of Residence Of The Executive Officer In Nagar Panchayat Gabhana.
Tender Value
39.82 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
5 days left
EMD
3.98 Lakhs
Bank guarantee accepted
Document Fee
4699
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aligarh → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Residence Of The Executive Officer In Nagar Panchayat Gabhana.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.All kinds of soil DSR 2023 Code 2.6.1 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:2:4 (1 Cement & 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 nominal size derived from natural sources |
| 3 | Reinforced cement concrete work in beams suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) Lintel of doors & window sunshades etc |
| 4 | Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth: Cement mortar 1:4 (1 cement & 4 coarse sand) |
| 5 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 12.5mm nominal size derived from natural sources) |
| 6 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for all heights (1) UPTO PLINTH LVL (a) Foundations, footings, bases of columns, etc. for mass concrete. (b) Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 8 | Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part there of (Plan area to be measured) Suspended floors, roofs, landings, beams and balconigs (Plan area to be measured) |
| 9 | Providing and fixing ISI marked flush doors shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters(a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 10 | Providing and fixing two track two panels sliding window with aluminium channel for roller track. Using R4 series with frame (64mm & above) x (45mm & above) ....................................(Height above 1.8 m) |
| 11 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete With 2nd class teak wood beading 62X19 mm |
| 12 | Thermo-Mechanically Treated bars of grade Fe-500D work such as reinforced concrete or reinforced, brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping & hooks(a) Ground Floor |
| 13 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections |
| 14 | Providing and laying vitrified floor tiles different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry 3.3 kg/ sqm including grouting the joints with white cement and matching pigments complete. Size of Tile 600x600 mm |
| 15 | Providing and laying vitrified tiles in skirting in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, approved make, in all colours and shades, laid on 20mm thick cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joints with white cement and matching pigments etc. |
| 16 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre (For Internal wall surface) |
| 17 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface and smooth complete |
| 18 | Providing and fixing stainless steel tower bolts (barrel type) with necessary screws etc. complete(a) 250 mm x 10mm |
| 19 | Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm |
| 20 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete |
| 21 | Making soak pit 1.5 m diameter 2.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks |
| 22 | MS Iron Work |
| 23 | Add 8% of total cost for plumbing work with suply, drain, washbasin, tap, trap and asseceries |
| 24 | Add 8% of total cost for Electrical work with switch, socket, fan and lights |
| 25 | Add GST 18% |
| 26 | Add rs. estemate figer amount Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender