Heavy Industries and Public Enterprises Government Departments Closing in 0 days TDR #58360280

Tender For Construction Of Boundary Wall And Repair Work Of Shamshan Sthal In Village- Salarpur, Yea

Issued by Government Departments · Gautam Buddha Nagar, Uttar Pradesh
Tender Value
30.83 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
0 days left
EMD
62000
Bank guarantee accepted
Document Fee
900
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Boundary Wall And Repair Work Of Shamshan Sthal In Village- Salarpur, Yea

BOQ

Name of Work:- CONSTRUCTION OF BOUNDARY WALL AND REPAIR WORK OF SHAMSHAN STHAL IN VILLAGE- SALARPUR, YEA
Sl. No. Item Description
1Cleaning jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m aboveground level and removal of rubbish up to distance of 50m out side the periphery of the area cleared UPPWD/SOR//DAR-18/2.31
2Item code morth 301 Excavtion in soil using hydraulics excavator and tippers with disposal upto 1000 meters Excavation for road work in soil with hydraulics excavator including cutting and loading in tippers, trimming bottom and side slopes in accordance with requiremements of lines , grades and cross section and transportation to the embankment location within all lifts and lead upto 1000 meters
3Providing and laying in position cement concrete with 4 cm gauge approved stone ballast c sand and cement in pro of 8:4:1 including supply of all material labour tools and plants etc req for proper comp of work
4centering & shuterring including strutting propping etc & removal of form for: Foundation , footing bases of colums etc for mass concrete
5centering & shuterring including strutting propping etc & removal of form for: Lintels, beams, plinth beams, griders, bressumer sand cantiliver
6centering & shuterring including strutting propping etc & removal of form for: Column, Pillers, Piers, Abutments, Posts and struts
7Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) DSR-18/5.1.2
8Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) DSR-18/5.1.2 all work above plinth upto V level
9Reinforcement for RCC work including straghtening cutting bending placing in position and binding all complete up to plinth
10M-150 brick work in 1:4 cement & Coarse sand 1.25f.M mortar in foundation and plinth including supply of all materials labour complection of the work compiation of work 1:4
11M-150 brick work in 1:4 cement & coarse sand 1.25f.M mortar Above plinth including supply of all materials labour complection of the work compiation of work 1:4
1212mm Cement Plaster of mix 1:6 (1 cement : 6 coarse sand)
1315mm Cement Plaster of mix 1:6 (1 cement : 6 coarse sand)
14Finishing walls with water proofing cement paint of required shade:New work Two or more coats applied 3.84 kg/bsqm
15Providing precast cement concrete JaIl 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 coarse sand) etc. complete excluding plastering of the jambs, sills and soffits.
16Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
17Painting with synthetic enemel paint of approved brand and manufacture to give an even shade: Two or more coats on new work
18Supply of good earth work banking excavated earth in layers not exceeding 20 cm in depth breaking clods watering rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonne and dressing up in embankments for roads flood banks marginal banks and guide banks or filling up ground depressions all lead as per (a.r.) for all kind of soils
19Construction of granular sub-base by providing close graded material, mixing in mechanical mix plant at OMC, carriage of mixed material to work at site, spreading uniform layers with motor grader on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 for grade-l material.
20Supply and fixing of India mark hand pump including making chabutara of dia 2 mtr. and 45 mtr lowering (depth) and PVC assembling, blinding pipe strainer and 63mm/110mm dia PVC pipe etc. (Pressure 6.0Kg/Cmsqr) including all labour & material and T&P complete as required as per direction of Engineer-in-charge.
21Dry Brick on Edge flooring in required pattern wirh bricks of class designation 150 on bed of earth including filling compressed woth M-150 Brick
22Providing and Laying in 60 mm thick ISI Mark Factory made cement concrete interlocking concrete paver block made by block making machine with strong vibratory compaction of approved size, design shape, laid in required colour and pattern over and including average 50mm thick compacted bed course sand and filling the joints with fine sand all complete as per the direction of Engineer in charge with conforming to IS-15658 and IRC: SP:63
23Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58360280
AUTHORITY Government Departments
TENDER VALUE 30.83 Lakhs
LAST DATE 19-11-2026
Authority
Authority Name Yamuna Expressway Industrial Development Authority
Work Description Tender for Construction Of Boundary Wall And Repair Work Of Shamshan Sthal In Village- Salarpur, Yea
Basic Detail
Tender No YEA/GM(PROJECT)/2026/600 DT-24/10/2026
Bidding Type Tender
Location
City Gautam Buddha Nagar
State Uttar Pradesh
Key Dates
Publish Date 03 Nov 2026
Submission Date 19 Nov 2026
Open Date 20 Nov 2026
Finance
Tender Value 30.83 Lakhs
Tender Fee 900
EMD 62000
Exemption Not Available
Document List
1fc7f5e5-9c9c-4af1-b7f1-d705a60a91ea.html
29.pdf
BOQ_2281383.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 03, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 19, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Nov 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
html

1fc7f5e5-9c9c-4af1-b7f1-d705a60a91ea.html

pdf

29.pdf

xls

BOQ_2281383.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender