Defence Statutory Bodies & Commissions/Committees Closing in 3 days TDR #58352867

Tender For Maintenance Of Wooden/ Steel Furniture Item At Rakhmuthi And Pallanwala Mil Stn And Its Outstations Under Ge (S) Akhnoor.

Issued by Statutory Bodies & Commissions/Committees · Jammu, Jammu and Kashmir
Tender Value
47 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
3 days left
EMD
94000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Maintenance Of Wooden/ Steel Furniture Item At Rakhmuthi And Pallanwala Mil Stn And Its Outstations Under Ge (S) Akhnoor.

BOQ

Name of Work:- MAINT OF WOODEN/ STEEL FURNITURE ITEM AT RAKHMUTHI AND PALLANWALA MIL STN AND ITS OUTSTATIONS UNDER GE (S) AKHNOOR.
Sl. No. Item Description
1SCHEDULE 'A' PART-I : BOQ OF ITEMS. Note- Colour of polish and particle board to Furniture as directed by GE
2REPAIR TO ALMIRAH LARGE STEEL (FD-67(M) FD-1031)
3Replacement of old unserviceable/ broken/ damaged legs with new legs made out of 1.0mm plane Galvanised iron sheet complete all as specified and shown on drawing including welding of legs, complete all as directed by Engineer-in-Charge.
4Replacement of old unserviceable/ broken/ damaged shelves with New Shelves made out of 1.0mm plane galvanised iron sheet, including fixing with existing surfaces as shown on drawing, complete all as specified and as directed by Engineer-in-Charge.
5Replacement of old unserviceable/ broken/ damaged mild steel brackets with new brackets of mild steel including welding in existing for fixing shelves as per existing pattern complete all as specified and as directed by Engineer-in-Charge.
6Replacement of old broken/unserviceable door handles of almirah ,size 100mm long ,mild steel ,chromium plated of approved make , ISI Marked ,best quality,complete with nuts and pins , complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
7Replacement of old existing broken/ unserviceable locks of any description and in any position with new brass locks . 75 mm with double keys,fixing with suitable screws/nuts, complete all as specified and directed by Engineer-in-Charge.
8Replacement of old broken/unserviceable locking device of any description and in any position with new locking device, three ways, fixing with suitable screws/nuts including repair of locking device, complete all as specified and as directed by Engineer-in-Charge.
9Removing of dents and old paints by burning off with blow lamp removing dents including applying one coat of putty to make surfaces even cleaning the surfaces with sand papers/scrappers and smooth on internal and external surfaces, complete all as specified and as directed by Engineer-in-Charge
10Preparation to old , decorated surfaces of the steel Almirah with shelves and spray painting with one coat of synthetic Smoke Grey paint of hammer tone of approved quality on internal and external surfaces, complete all as specified and as directed by Engineer-in-Charge.
11REPAIR TO ALMIRAH MEDIUM STEEL (FD-67(M) FD-1032)
12Replacement of old unserviceable/ broken/ damaged legs with new legs made out of 1.0mm plane Galvanised iron sheet complte all as specified and shown on drawing including welding of legs, complete all as directed by Engineer-in-Charge.
13Replacement of old unserveciable broken/damaged shelves with new shelves made out of 1.0 mm plane galvanised iron sheet, including fixing with existing surfaces as shown on drawing, complete all specified as directed by Engineer-in-Charge.
14Replacement of old unserviceable/ broken/ damaged mild steel brackets with new brackets of mild steel including welding in existing for fixing shelves as per existing pattern complete all as specified and as directed by Engineer-in-Charge.
15Replacement of old existing broken/ unserviceable door handles of almirah ,size 100mm long ,mild steel ,chromium plated of approved make , ISI Marked ,best quality,complete with nuts and pins , complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
16Replacement of old existing broken/ unserviceable locks of any description and in any position with new brass locks . 75 mm with double keys,fixing with suitable screws/nuts, complete all as specified and directed by Engineer-in-Charge.
17Replacement of old broken/unserviceable locking device of any description and in any position with new locking device, three ways, fixing with suitable screws/nuts including repair of locking device, complete all as specified and as directed by Engineer-in-Charge.
18Removing of dents and old paints by burning off with blow lamp removing dents including applying one coat of putty to make surfaces even cleaning the surfaces with sand papers/scrappers and smooth on internal and external surfaces, complete all as specified and as directed by Engineer-in-Charge.
19Preparation to old , decorated surfaces of the steel Almirah with shelves and spray painting with one coat of synthetic Smoke Grey paint of hammer tone of approved quality on internal and external surfaces, complete all as specified and as directed by Engineer-in-Charge.
20REPAIR TO CHAIR VERANDAH, [FD-256, FD-359 ]
21Replacement of old unserviceable/ broken/ damaged cane from chair verandah, cleaning to cane holes and weaving with new cane, plastic 4.0mm wide, 0.50mm thick, half round, approved quality weaving in \\"Matt/ Pattern\\" minimum weight of cane mentioned in drawging, complete all as specified and as shown in respective drawings and as directed by Engineer-in-Charge.
22Preparation of old surfaces of Chair verandah with wire brush, steel scraper and surface rubbed with sand paper to remove small scale and rust so as to obtain a clean surface and applying one coat of synthetic enamel paint of white colour as per existing specifications, complete all as specified and as shown in respective drawings and as directed by Engineer-in-Charge.
23REPAIR TO CHAIR CB STEEL WITH ARM AND WITHOUT ARM (FD-75(M)}
24Replacement of old unserviceable/ broken/ damaged existing back frame with new back frame made of Ist class hard wood duly canned canned with cane,plastic ,2mm thick of 1st quality in godrej pattern including french polish ,complete all as specified and shown on drawing and as directed by Engineer-in-Charge.
25Replacement of old unserviceable/ broken/ damaged existing Seat frame with new seat frame made of Ist class hard wood duly canned canned with cane,plastic ,2mm thick of 1st quality in godrej pattern including french polish ,complete all as specified and shown on drawing and as directed by Engineer-in-Charge.
26Replacement of old unserviceable/ broken/ damaged existing arms with arms made of 1st class of hard wood size 410 x 50 x25 mm including painting in black clour to wooden portion with two coats of synthetic enamel black paint ,complete all as specified and shown on drawing and as directed by Engineer-in-Charge.
27Mild steel flat iron 30x30mm as stiffner under the seat duly welded both ends to frame, fixed in repairs, complete all as specified and as directed by Engineer-in-Charge
28Prepration of the existing old decorated mettalic surfaces of the chair CB steel with Arms including welding at joints as required and spray paintings one coat of synthetic enamel olive green paint of approved quality and black colour paintings to wooden handles/arms rest including prepration of surfaces ,complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
29REPAIR TO LOCKER BED SIDE STEEL (FD-1029)
30Replacement of old unserviceable/ broken/ damaged existing hasp and stapple of any description and in any position with new hasp and stapple chromium plated ,size 75mm x 40mm x3mm fixing with rivets or srews /nuts , complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
31Replacement of old unserviceable/ broken/ damaged existing door handle of steel lockers with new handles,mild steel chromium plated of approved make size100mm ,fixed with srews /nuts and pins , complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
32Replacement of old unserviceable/ broken/ damaged existing hinges of steel locker with new hinges ,mild steel ,chromium plated of approved make,size 75mm , fixed with screws/nuts and pins or rivetted, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
33Replacement of old unserviceable/ broken/ damaged legs with new legs made out of 1.00 mm plane glavanised iron sheet ,size 100mm height and 60 mm wide including welding of legs ,complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
34Replacement of old unserviceable/ broken/ damaged conduit pipe pipe with new conduit pipe ,mild steel chromium plated ,20mm dia and 1.60mm wall thickness ,complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
35Prepration of the existing old decorated surfaces of locker bed side steel by removing of all dents and filling with putty and spray painting with one coat of synthetic enamel olive green paint of approved quality on internal and external surface ,complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
36REPAIR TO TABLE DINING OR, FD-165 (M)
37Replacement of old unserviceable/ damaged top from table dinning Ors with new top made of 18mm thick prelaminated particle boards ,commercial with one side teak face and teak wood edging 4.0mm thick all round the top , complete all as specified and and shown on drawing and all as directed by Engineer-in-Charge.
38Repair and welding to the serviceable /broken damaged joints of legs ,stiffners ,long rails and shorts rails ,made out of 25mm square mild steel pipe 1.6mm ,complete all as specified and and shown on drawing and all as directed by Engineer-in-Charge.
39Prepration of the existing old decorated/ un decorated surfaces of table dining ORs and spray painting with one coats of synthetic enamel black paints of approved quality ,,complete all as specified and and shown on drawing and all as directed by Engineer-in-Charge.
40REPAIR TO TABLE OFFICE CLERK STEEL, FD-84(M) FD-1004
41Replacement of old unserviceable/ damaged top with new top made of 18mm thick prelaminated particle boards ,commercial with one side teak face and teak wood edging 4.0mm thick all round the top , complete all as specified and and shown on drawing and as directed by Engineer-in-Charge.
42Replacement of old unserviceable/ broken/ damaged old drawers of table office clerk steel with new drawers made out of 1.00 mm plane glavanised iron sheet including fixing and welding ,complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
43Prepration of the existing old decorated/ undecorated surfaces and removing denting wherever required and spray painting with one coats of synthetic enamelolive green paints of approved quality ,,complete all as specified and and shown on drawing and as directed by Engineer-in-Charge.
44REPAIRS TO TABLE OFFICE OFFICER STEEL , [FD-84(M), FD-1003 ]
45Replacement of old unserviceable/ damaged top with new top made of 18mm thick prelaminated particle boards ,commercial with one side teak face and teak wood edging 4.0mm thick all round the top , complete all as specified and and shown on drawing and as directed by Engineer-in-Charge.
46Replacement of old unserviceable/ broken/ damaged old drawers of table office officer steel with new drawers made out of 1.00 mm plane glavanised iron sheet including fixing and welding ,complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
47Prepration of the existing old decorated/ un decorated surfaces and removing denting whereever required and spray painting with one coats of synthetic enamelolive green paints of approved quality ,,complete all as specified and and shown on drawing and as directed by Engineer-in-Charge.
48REPAIRS TO TEAPOY VERANDAH [FD-255]
49Replacement of old unserviceable/ damaged top with new top made of 18mm thick prelaminated particle boards ,commercial with one side teak face and teak wood edging 4.0mm half round thick all round the top , complete all as specified and and shown on drawing and as directed by Engineer-in-Charge.
50Prepration of the existing old decorated/ un decorated surfaces and removing denting whereever required and spray painting with one coats of synthetic enamel white paints of approved quality ,,complete all as specified and and shown on drawing and as directed by Engineer-in-Charge.
51Bed hard Steel frame [ FD/E6/MAP/08R]
52Replacement of unserviceable/ broken/ damaged plywood top of Bed hard with new plywood top, 12mm thick with seven Nos. of ply, commercial, BWR grade, type BB, size 1974mmx850mm, fixed with nails, complete all as specified and shown in drawing and as directed by Engineer-in-Charge.
53Preparation of the existing, decorated/ undecorated surfaces and removing denting wherever required and spray painting with one coat of synthetic enamel black paint of approved quality, complete all as specified and directed by Engineer-in-Charge.
54Charpoy With hard Top [FD/MAP-II/04]
55Replacement of unserviceable/ broken/ damaged plywood top of Bed hard with new plywood top, 12mm thick with seven Nos. of ply, commercial, BWR grade, type BB, size 1930mmx850mm, fixed with nails, complete all as specified and shown in drawing and as directed by Engineer-in-Charge.
56Preparation of the existing, decorated/ undecorated surfaces and removing denting wherever required and spray painting with one coat of synthetic enamel black paint of approved quality, complete all as specified and directed by Engineer-in-Charge.
57Table 900 x 600 x 760 mm with and without drawer Steel [FD-1007 ,FD-1008]
58Removing unserviceable table top & Supplying and fixing new table top, pre laminated particle board, one side laminated, 18 mm thick, exterior grade with 4 mm thick Teak wood beading duly french polished to obtain glossy finish all around the top, complete all as specified and as directed.
59Material and labour for one coat of synthetic enamel paint to the frame of table including preparing the surfaces and removing denting wherever required complete all as specified and as directed.
60Sofa Set 4/5 seater (FD/MAP/II/02)
61Replacement of old unserviceable/ broken/ damaged front leg with new front leg alongwith S&F of the same made out of 1st class teak wood complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
62Replacement of old unserviceable/ broken/ damaged rear leg with new rear leg alongwith S&F of the same made out of 1st class teak wood complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
63Replacement of old unserviceable/ broken/ damaged batten of seat and back with new batten of seat and back alongwith S&F of the same made out of 1st class teak wood complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
64Replacement of old unserviceable/ broken/ damaged arms with new arms alongwith S&F of the same made out of 1st class teak wood complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
65Replacement of old unserviceable/ broken/ damaged side rail with new side rail alongwith S&F of the same made out of 1st class teak wood complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
66Replacement of old unserviceable/ broken/ damaged long rail (front and back both) with new long rail (front and back) alongwith S&F of the same made out of 1st class teak wood complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
67Preparation to wooden surfaces of Sofa Set 5 seater/4 seater and polishing with melamine finish to all exposed to view surfaces, complete all as specified and as directed by Engineer-in-Charge.
68Taking down old unserviceable velvet/tapestry cloth from exisiting serviceable cushion of sofa set and supply & fixing new approval quality velvet/tapestry cloth not less than Rs 350/- per mtr duly stiched complete all as specified and shown on drg and directed.
69Taking down old unserviceable cushions with cover of seat and back of sofa set and supplying and fixing new foam cushions 32 density of size 22\\"x21\\"x4 inch, duly covered with velvet cloth not less then Rs. 400/- per meter complete all as specified and shown on drg and directed.
70Taking down old unserviceable cushions cover only of seat and back of sofa set and supplying and fixing new foam cushions 32 density of size 22\\"x21\\"x4 inch, duly covered with velvet cloth not less then Rs. 400/- per meter complete all as specified and shown on drg and directed.
71Form with and without back (Drg No : FD-77M, FD-1027 & FD-78M
72Removing the unserviceable seat from form with and without out back and providing new seat of size and shape shown in the drawing and directed by Engineer-in-charge. Painting/Polishing all exposed parts (steel/wooden) of form with and without back after repair/replacement of parts.
73Removing the unserviceable back from form with and without out back and providing new seat /back of size and shape shown in the drawing and directed by Engineer-in-charge. Painting/Polishing all exposed parts (steel/wooden) of form with and without back after repair/replacement of parts.
74REPAIR TO CHARPOY GI PIPE PLYTOP (FD-220)
75Replacement of old existing unserviceable/ damaged plywood top from charpoy GI pipe with new plywood top following under mentioned steps, complete all as specified as directed by Engineer-in-Charge.(a) Fixing 02 Nos stiffeners of mild steel angle iron 25mmx25mmx3mm, 900mm long, at equal distance and perpendicular to long rails of GI charpoy, fixing by drilling holes including counter sunk screws, nuts and washers at both ends on top side of long rails.(b) Drilling holes two Nos. of 7mm dia in each long rail, short rail and newly welded stiffener of mild steel angle iron.(c) Top of charpoy with plywood, 12mm thick, commercial, BWR grade, type BB, size 1980mmx900mm fixed to GI pipe frame with mild steel conter sunk screws, nuts and washers, as two Nos in each long rail, short rail and newly welded stiffeners of mild steel angle iron.(d) Painting of mild steel stiffeners with two coats of synthetic enamel paint over one coat of zinc chrome primer after preparing the surfaces.(e) Painting of old/ new galvanised pipe of GI Charpoy and applying one coat of synthetic enamel paint of silver colour after preparation of surfaces.
76Replacement of old unserviceable/ broken/ damaged existing long rails with new long rails for GI Charpoy, 32 mm bore GI pipe, medium grade, ISI marked, length as shown in drawings, complete all as specified and directed by Engineer-in-Charge.
77Taking out old unserviceable/ broken/ damaged existing short rails from charpoy GI Pipe and replace with new short rail retrieved from damaged long rail under serial item Nos-16.02 here-in-before including cutting/ threading and fixing/ tightening in the existing charpoys including welding as required, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
78Taking out old unserviceable/ broken/ damaged existing leg from charpoy GI Pipe and replace with new leg retrieved from damaged long/ short rail under serial item Nos- 16.02 and 16.03 here-in-before including cutting/ threading and fixing/ tightening in the existing charpoys including welding of 32mm dia washer at bottom of leg as end cap and mild steel clamps as FMN set, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
79Replacement of old unserviceable/broken/damaged existing three way elbows GI from charpoy GI pipe with new three way elbows GI, 32mm bore, medium grade, (ISI Marked) wherever required, complete all as specified and shown in the drawings.
80Replacement of old unserviceable/broken/damaged existing check nut GI from charpoy GI with Check nut GI, 32mm bore, medium grade, (ISI Marked) wherever required, complete all as specified and shown in the drawings.
81Book Caste Steel (FD-90/1028)
82Replacement of old lock with new lock as per existing size conforming to relevant Drgs, complete all as specified and directed.by Engineer-in-Charge.
83Replacement of broken glass 5mm from door with new glass 5mm, complete all as specified and directed.by Engineer-in-Charge.
84Replacement of broken base of book case steel with new base as per existing size conforming to relevant Drgs, complete all as specified and directed.by Engineer-in-Charge.
85Replacement of U/S door of book case as per existing size conforming to relevant Drgs, complete all as specified and directed.by Engineer-in-Charge.
86Replacement of handles of book case steel with new Handle, complete all as specified and directed.by Engineer-in-Charge.
87M&L for painting with two coats of synthetic enamel aluminium paint over old painted surfaces incl preparation of old steel surfaces, complete all as specified and directed.by Engineer-in-Charge.
88Chair School with Hand Board (TP/MAP)
89Replacement of old unserviceable/ broken/ damaged PVC Sheet form Chair school with new PVC Sheet of existing size and colour to Chair School complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
90Replacement of old unserviceable/ broken/ damaged hand board from chair school with new hand board of existing size made of 18/19mm thick particle board prelaminated, exterior grade, duly covered with 4mm thick teak wood beading all around and fixed a hand board fixing device at the bottom of the hand board as hand board can attach with chair school, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.Note- colour of polish and particle board to wooden furninture as directed by GE.
91Preparation to school chair with hand board and painting all around with black colour finish to all exposed to view surfaces, complete all as specified and as directed by Engineer-in-Charge.
92REPAIR TO BED HARD WITH PLYWOOD TOP , (FD-246)
93Replacement of unserviceable/ broken/ damaged plywood from Bed hard or Bed Newar with new plywood top, 12mm thick with seven Nos. of ply, commercial, BWR grade, type BB, size 1900mmx900mm, fixed with nails, complete all as specified and shown in drawings.
94Replacement of unserviceable/ broken/ damaged head rest board with new head rest board, made with second class hard wood frame and 4.0mm thick, veneered phenol bonded ply wood, teak face on both sides of head rest of the bed including 4.0mm thick teak wood as shown.
95Replacement of unserviceable/ broken/ damaged foot rest board with new head rest board, made with second class hard wood frame and 4.0mm thick, veneered phenol bonded ply wood, teak face on both sides of head rest of the bed including 4.0mm thick teak wood as shown
96Preparation to wooden surfaces of Bed and polishing with melamine finish with compressor and as directed by Engineer-in-Charge.
97REPAIR TO CHAIR WRITING, (FD-280)
98Replacement of unserviceable/ broken/ damaged rear leg with new rear leg, made of 1st classhard wood, seasoned, size 890x55x30mm and fixing, complete all as specified and shown in drawing and as directed by Engineer-in-Charge.
99Replacement of unserviceable/ broken/ damaged front leg with new front leg, made of 1st classhard wood, seasoned, size 675x55x30mm and fixing, complete all as specified and shown in drawing and as directed by Engineer-in-Charge.
100Replacement of unserviceable/ broken/ damaged stiffener with new stiffener, made of 1st classhard wood, seasoned, size 535x65x30mm and fixing, complete all as specified and shown in drawing and as directed by Engineer-in-Charge.
101Replacement of unserviceable/ broken/ damaged arm rest with arm rest, made of 1st classhard wood, seasoned, size 535x65x30mm and fixing, complete all as specified and shown in drawing and as directed by Engineer-in-Charge.
102Replacement of old unserviceable/broken/damaged cane from Chair Writing, cleaning to cane holes and weaving with new cane, 2.0mm wide 0.50mm thick, half round, approved quality weaving in \\"Godrej Pattern\\" using minimum weight of cane mentioned in drawing including removal of existing plishing from the wooden surface and repolished with french polish, 4.00mm wide, half round cane to be used as border all around, complete all as spectifed and as directed by Engneer-in-Charge
103Repair to Chair Writing including dismentaling of old broken parts and fixing with new parts as mentioned above to make it serviceable, complete all as specified and as directed by Engineer-in-Charge.
104REPAIR TO CHAIR DINING [FD-16, FD-228, FD-279 and FD-1105]
105Replacement of unserviceable/ broken/ damaged rear leg with new rear leg, made of 2nd class hard wood, seasoned, size 890x55x30mm and fixing, complete all as specified and shown in drawging and as directed by Engineer-in-Charge.
106Replacement of unserviceable/ broken/ damaged front leg with new front leg, made of 2nd class hard wood, seasoned, size 460x55x30mm and fixing, complete all as specified and shown in drawing and as directed by Engineer-in-Charge.
107Replacement of unserviceable/ broken/ damaged stiffener with new stiffener, made of 2nd class hard wood, seasoned, size 440x65x30mm and fixing, complete all as specified and shown in drawing and as directed by Engineer-in-Charge.
108Replacement of unserviceable/ broken/ damaged seat rail with new seat rail, made of 2nd class hard wood, seasoned, size 440x65x30mm, including making holes for canning and fixing, complete all as specified and shown in drawing and as directed by Engineer-in-Charge.
109Replacement of old unserviceable/broken/damaged cane from Chair Dinning, cleaning to cane holes and weaving with new cane, 2.0mm wide 0.50mm thick, half round, approved quality weaving in \\"Godrej Pattern\\" using minimum weight of cane mentioned in drawing including removal of existing plishing from the wooden surface and repolished with french polish, 4.00mm wide, half round cane to be used as border all around, complete all as spectifed and as directed by Engneer-in-Charge
110REPAIR TO CHAIR DINING CUSHIONED [FD/MAP-II/04 and FD/E6/MAP/15R]
111Replacement of unserviceable/ broken/ damaged stiffener with new stiffener, made of 1st class hard wood, seasoned, complete all as specified and shown in drawing and as directed by Engineer-in-Charge.
112Replacement of Unsv cushion of chair dining offr with new cushion of thickness 75 mm , density 32 mm of cloth should not be less than RS 350/meter, colour of tapesty cloth with fabric on seat of 12 mm thick plywood , as directed by Engineer-in-Charge.
113Repair to chair dinning cushioned including dismantling of old broken parts and fixing new parts as mentioned above to make it serviceable, complete all as specified and as shown in respective drawings and as directed by Engineer-in-Charge.
114Preparation to wooden surfaces of chair dining cushioned and polishing with melamine polish by compressor to all exposed to view surfaces, complete all as specified and as directed by Engineer-in-Charge.
115REPAIR TO CHAIR EASY [FD-229]
116Replacement of unserviceable/ broken/ damaged rear leg with new rear leg, made of 2nd class hard wood, seasoned, size 890x50x25mm and fixing, complete all as specified and shown in drawing and as directed by Engineer-in-Charge.
117Replacement of unserviceable/ broken/ damaged front leg with new front leg, made of 2nd class hard wood, seasoned, size 545x50x25mm and fixing, complete all as specified and shown in drawing and as directed by Engineer-in-Charge.
118Replacement of unserviceable/ broken/ damaged hand rest/ arm rail with new arm rest/ hand rail, made of 2nd class hard wood, seasoned, size 61x65x25mm and fixing, complete all as specified and shown in drawing and as directed by Engineer-in-Charge.
119Replacement of old unserviceable/broken/damaged cane from Chair Eazy, cleaning to cane holes and weaving with new cane, 2.0mm wide 0.50mm thick, half round, approved quality weaving in \\"Godrej Pattern\\" using minimum weight of cane mentioned in drawing including removal of existing plishing from the wooden surface and repolished with french polish, 4.00mm wide, half round cane to be used as border all around, complete all as spectifed and as directed by Engneer-in-Charge
120REPAIR TO TABLE 900x600 WITH DRAWERS AND WITHOUT DRAWERS (FD-1007, FD-1008)
121Replacement of old unserviceable/ broken/ damaged top form table 900x900x760mm with new top made of 18/19mm thick particle board prelaminated, exterior grade, duly edging with 4mm thick teak wood beading all around, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
122Replaement of old unserviceable/broken/damaged drawer from table with new drawer, made of 1st class hard wood and fixed with 6.0mm plywood bottom BWR grade, complete all as specified and shwon in the drawings and as directed by Engineer-in-Charge
123Repair of Table 900x600mm including dismantiling of old broken parts and fixing with new parts as mentioned above. Table shall be set right by providing 75x75mm teak wood triangular corner between top and leg. Complete all as specified and shown in the drawing and as directed by Engineer-in -charge.
124Preparation to wooden surfaces of table 900x900x760mm with /without Drawer and polishing withpolishing with melamine finish to all exposed to view surfaces, complete all as specified and as directed by Engineer-in-Charge.
125REPAIR TO TABLE WRITING (FD-249 and FD-275)
126Replacement of old unserviceable/ broken/ damaged top with new top made of 18/19mm thick particle board prelaminated, exterior grade, duly edging with 4.0mm thick teak wood beading all around, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
127Replacement of old unserviceable/broken/damaged drawer from table with new drawer, made of 1st class hard wood and fixed with 6.0mm plywood bottom BWR grade, complete all as specified and shown in the drawing and as directed by Engineer-in-Charge.
128Replacement of old unserviceable/broken/damaged doors with new doors of pre laminated particle board 18mm with one side teak face and edging with 4.0mm thick teak wood beading including piano hinges, screwed and new knob complete all as specified and shown in the drawings.
129Repair to Table writing including dismentiling of old broken parts and fixing with new parts as mendtioned above. Table shall be set right by providing 75x75mm teak wood triangular corner between top and leg. Complete all as specified and shown in the drawing and as directed by Engineer-in-Charge.
130Preparation to wooden surfaces of table writing and polishing with melamine finish with compressor and as directed by Engineer-in-Charge.
131REPAIR TO TABLE DINNING 6/ 8 PERSONS (FD-239, FD-273 and FD-376)
132Replacement of old unserviceable/ broken/ damaged top from table dinning 6-pers with new top made of 18/19mm thick particle board prelaminated, one side natural teak face, exterior grade, duly covered with 4mm thick teak wood beading all around, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
133Replacement of old unserviceable/ broken/ damaged top from table dinning 8-pers with new top made of 18/19mm thick particle board prelaminated, one side natural teak face, exterior grade, duly covered with 4mm thick teak wood beading all around, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
134Replacement of old unserviceable/broken/damaged existing leg with new leg, made of 1st class hardwood, seasoned, complete all as specified and shown in the drawings as as directed by Engineer-in-Charge.
135Repair to table dining 6/8 pers including dismentiling of old broken parts and fixing with new parts as mentioned above. Table shall be set right by providing 75x75 mm teak wood triangular corner between top and leg. Complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
136Preparation to wooden surfaces of table dining 6/8 pers and polishing with melamine finish with compressor and as directed by Engineer-in-Charge.
137REPAIR TO TABLE DRESSING LADIES (FD-32, FD-251 and FD-378)
138Replacement of old unserviceable/ broken/ damaged/ blurr mirror and wooden frame with new mirror, 5.0mm thick, electro-copper plated and teak wooden frame 6.0mm thick and 6.0mm thick plywood on back side frame, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.Note- colour of polish and particle board to wooden furninture as directed by GE.
139Replacement of old unserviceable/ broken/ damaged top form table dressing with new top made of 18/19mm thick particle board prelaminated, one side natural teak face, exterior grade, including 4.0mm thick teak wood edging al-around on edges, complete all as specified and shown on drawing and as directed by Engineer-in-Charge.
140Replacement of old unserviceable/ broken/ damaged knobs from drawers with new knobs, metallic, anodized copper plated knob, 32mm dia, including mettalic screw, complete all as specified and as directed by Engineer-in-Charge.
141Preparation to wooden surfaces of Table Dressing Ladies and polishing with polishing with melamine finish to all exposed to view surfaces, complete all as specified and as directed by Engineer-in-Charge.
142REPAIR TO TEAPOY (FD-278 and FD-382)
143Replacement of old unserviceable/ broken/ damaged top form teapoy with new top made of 18/19mm thick particle board prelaminated, exterior grade, duly covered with 4mm thick teak wood beading all around, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.Note- colour of polish and particle board to wooden furninture as directed by GE.
144Preparation to wooden surfaces of Teapoy and polishing with polishing with melamine finish to all exposed to view surfaces, complete all as specified and as directed by Engineer-in-Charge.
145REPAIR TO TABLE CENTRE, SIZE 900X450mm (FD-29 and FD-274)
146Replacement of old unserviceable/ broken/ damaged top form table centre with new top made of 18/19mm thick particle board prelaminated, exterior grade, duly covered with 4mm thick teak wood beading all around, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.Note- colour of polish and particle board to wooden furninture as directed by GE.
147Preparation to wooden surfaces of Table centre and polishing with polish alongwith melamine finish with compressor to all exposed to view surfaces, complete all as specified and as directed by Engineer-in-Charge.
148REPAIR TO PEG TABLE (FD-25, FD-277 and FD-384)
149Replacement of old unserviceable/ broken/ damaged top form teapoy with new top made of 18/19mm thick particle board prelaminated, exterior grade, duly covered with 4mm thick teak wood beading all around, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.Note- colour of polish and particle board to wooden furninture as directed by GE.
150Preparation to wooden surfaces of Peg table and polishing withpolishing with melamine finish to all exposed to view surfaces, complete all as specified and as directed by Engineer-in-Charge.
151REPAIR TO CHAIR WRITING CUSHIONED (FD/E6/MAP/12)
152Replacement of old unserviceable/damaged seat and back with fabric and moulded polyrethane foam with PVC lipping all round. The polurethane foam shall be 50mm thick and shall be moulded with density 50-55 kg per cubic mtr thick and hardness 20+/- KG pm hampden machine. complete all as specified by Engineer-in-Charge.
153Replacement of old unserviceable/damaged hand rest with new hand rest of size 24cm x 6.4cm x 3.3 cm shall be made out pf polyurethane 76-85 shore 'A' Hardness and reinforce with MS insert scratch and weather resistant Rest all as per Drg, complete all as specified and as directed by Engineer-in-Charge.
154REPAIR TO CHAIR REVOLVING (VARIOUS TYPES) (TP/MAP)
155Replacement of old unserviceable/ broken/ damaged seat and back with new seat and back of different sizes, made with fabric and moulded polyurethane foam together with seat and back cover. Back foam will be disigned with contoured lumber support for extra comfort. Polyutherane foam shall be machine moulded with density 45±2 Kg/ Cum and hardness 20±2 Kg on hampden machine at 25% compression.The colour, texture and shade of fabric to be used shall be approved from engr-in-charge and shall contain materials Acrlic, Polyster, Poly-viscose and Polypropyline. One sample shall be got approved by Engineer-in-charge .Rest all as shown in the drawings and as directed by Engineer-in-Charge.
156Replacement of old unserviceable/ broken/ damaged hydraulic system of chair .The piston and hydraulic of chair will be of best quality of godrej or equivalent make, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
157Replacement of old unserviceable/ broken/ damaged arm rest with new arm rest, made of black integral skin polyurethane reinforced with mild steel inserted, having scratch and weather resistance with 50-70 shore ‘A’ hardness. Arm rest shall be fitted to seat with powder coated arm rest brackets made of 5.0mm thick HR steel, complete all as specified and as per existing pattern and design and as directed by Engineer-in-Charge.
158Replacement of old unserviceable/ broken/ damaged wheel castors with new wheel castors, injection moulded in black nylon for trouble free movement, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
159Repair to Table Dressing Gents (FD-31, FD-230)
160Replacement of old unserviceable/broken/damaged/blurr mirror and wooden frame with new mirror, 5.0mm thick, elctro copperr plated and teak wooden frome 6.0mm thick and 6.0mm thick plywood on back side frame, complete all as specified and shown on drawing and as directed by Engineer-in-Charge.
161Replacement of old unserviceable/broken/damaged top from table dressing gents with new top made of 18/19mm thick particle board perlaminated, one side natural teak face, exterior grade including 4.0mm thick teak wood eddgind all arojnd on edges, complete all as specified and shown in drawings.
162Replacement of old unserviceable/broken/damaged drawer from table dressing gents with new drawer made of wood except bottom and front face, bottom shall be made of plywood 6mm thick, commercial type front face of drawer shall be made of pre laminated particle board, 18/19 mm teak face including anodized copper plated knob, complete all as specified and shwon in drawings and as directed by Engineer-in-Charge.
163Replacement of old broken/damaged knobs with new knobs 32mm dia, metallic, anodized copper plated brass knob including screws for fixing, complete all as specified and as directed by Engineer-in-Charge.
164Table 1200x900x760mm(table Dining 4 Person) ( FD/MAP-II/03)
165Replacement of old unserviceable/ broken/ damaged base from computer table with new base 18/19mm thick particle board laminated, exterior grade, duly covered with 4mm thick teak wood beading all around duly, complete all as specified and shown in the drawing.
166Preparation to steel surfaces of computer table and polishing with polishing with melamine finish to all exposed to view surfaces, complete all as specified and as directed by Engineer-in-Charge.
167Replacement of unserviceable tops and S&F new top of Table with 18/19mm thick particle board prelaminated, exterior grade, duly covered with 4mm thick teak wood beading all around duly, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
168REPAIR TO BOARD NOTICE (FD-99M)
169Replacement of old unserviceable/ broken/ damaged Glass for glazing of front shutter with new glazed glass, size 600x450mm and 3.0mm thick, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
170Replacement of old unserviceable/ damaged existing green Baize with new Baize, size 900x600mm, fixed on 12mm thick soft board alongwith 6.0mm thick commercial plywood, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.
171Preparation to wooden surfaces of table centre and polishing with french polish of high glossy finish, to all exposed to view surfaces, complete all as specified and as directed by Engineer-in-Charge.
172Table Cook House (FD-49 & 297)
173Dismantling of old US legs of Table and S&F new legs made out of 1st class hard wood shisham made to shape and size and making wrought duly polished . PVC shoe shall be provided to all legs where ever required complete all as specified and as directed by Engineer-in-Charge..
174Dismantling of old US long rail of Table and S&F new long rail made out of 1st class hard wood shisham made to shape and size and making wrought duly polished complete all as specified aand as directed by Engineer-in-Charge.
175Dismantling of old US short rail/short stiffner of Table and S&F new short rail/short stiffner made out of 1st class hard wood shisham made to shape and size and making wrought duly polished complete all as specified and as directed by Engineer-in-Charge.
176Dismantling of US marble top and S&F new marble top.
177Hat stand with mirror (FD-233)
178Removing old unserviceable broken looking mirror from Hat stand and S&F new approval quality 5 to 6mm thick (plus / minus 5% tolerance) electro copper plated sheet glass mirror of size 300x440mm of, duly fixed with existing wooden frame and 6mm thick commercial ply wood including applying two coats of french polish after preparation of surface complete all as specified and shown on drgs and directed by Engr-in-Charge.
179Dismantling of old US Teak wood frame of hat stand and S&F new teak wood frame made out of Teak wood made to shape and size and making wrought duly polished complete all as specified and directed by Engineer-in-Charge.
180Removing old unserviceable broken Hat Hanging metal pegs and S&F new approved quality 04 Nos of hanging pegs all as specified and as directed by Engineer-in-Charge.
181Side Board Large/Small (Drg No. FD-241, 371, 372 & 1112)
182Removing the existing unserviceable door shutters (both) of side board and supply and fix new door shutters (both) as to match with the existing, made of 18mm thick teak face Pre-laminated MDF with laminated finish including knob all as specified and directed by Engineer-in-charge
183S&F of powder coated MS handle 100 long of side board all as specified and as directed by Engr-in-Charge.
184Removing the existing unserviceable bottom of side board and supply and fix new bottom of Pre-laminated particle board exterior grade 18/19mm thick all as specified and directed by Engineer-in-charge
185Removing the existing unserviceable drawer of side board and supply and fix new drawer of Pre-laminated particle board exterior grade 18/19mm thick all as specified and directed by Engineer-in-charge
186Removing the existing unserviceable top of side board and supply and fix new top as match with existing made out of 18 mm thick pre-laminateded MDF with laminated finishduly providing 4mm thick teak wood beading all around duly policed all as specified and directed by Engineer-in-charge
187S&Fof new PVC/hard rubber shoe under each leg at the bottom of the leg, complete all as specified and as directed by Engineer-in-Charge.
188Removing the existing unserviceable per laminated MDF board from left and right side (both) of side board supply and fix new pre laminated MDF board side (both) as to match with the existing all as specified and shown in drawing and directed by Engr-in-charge
189Removing the existing unserviceable back of side board supply and fix new back made of 6 mm thick plywood on match with the existing all as specified and shown in drawing and directed by Engr-in-charge Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58352867
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 47 Lakhs
LAST DATE 24-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Maintenance Of Wooden/ Steel Furniture Item At Rakhmuthi And Pallanwala Mil Stn And Its Outstations Under Ge (S) Akhnoor.
Basic Detail
Tender No GES/AKH-77/2026-27
Bidding Type Tender
Location
City Jammu
State Jammu and Kashmir
Key Dates
Publish Date 03 Nov 2026
Submission Date 24 Nov 2026
Open Date 02 Dec 2026
Finance
Tender Value 47 Lakhs
Tender Fee 500
EMD 94000
Exemption Not Available
Document List
2436f62f-8b13-42bb-a261-f00c83bf0a66.html
BOQ_894103.xls
TD-77-25-26.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 03, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Dec 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

2436f62f-8b13-42bb-a261-f00c83bf0a66.html

xls

BOQ_894103.xls

pdf

TD-77-25-26.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender