Defence Statutory Bodies & Commissions/Committees Closing in 3 days TDR #58352852

Tender For Petty Repair For Attending Day To Day E/M External Water Supply Complaints And Electrical Complaints Of Shankar Vihar, Lower Shankar Vihar, Vikram Vihar, Otm-I, Signal Enclave, And Adjoining Areas Under Age (U) Water Supply No-Iii, Under G

Issued by Statutory Bodies & Commissions/Committees · New Delhi, Delhi
Tender Value
41.94 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
3 days left
EMD
83880
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Petty Repair For Attending Day To Day E/M External Water Supply Complaints And Electrical Complaints Of Shankar Vihar, Lower Shankar Vihar, Vikram Vihar, Otm-I, Signal Enclave, And Adjoining Areas Under Age (U) Water Supply No-Iii, Under Ge (U) Water Supply, Delhi Cantt-10

BOQ

Name of Work:- PETTY REPAIR FOR ATTENDING DAY TO DAY E/M EXTERNAL WATER SUPPLY COMPLAINTS AND ELECTRICAL COMPLAINTS OF SHANKAR VIHAR, LOWER SHANKAR VIHAR, VIKRAM VIHAR, OTM-I, SIGNAL ENCLAVE, AND ADJOINING AREAS UNDER AGE (U) WATER SUPPLY NO-III, UNDER GE (U) WATER SUPPLY, DELHI CANTT-10
Sl. No. Item Description
1Labour only for attending day to day external/treated water supply complaints of all nature including grey water pipe leakage i.e leakage in water supply pipe lines , fitting/fixture, over flow of overhead tank, no water supply in supply tank/direct kitchen tap and grey water supply in various locations & taking out water from trenches during repair including note down the complaints in complaint register complete all as specified and as directed (Note:- Any material required for attending complaints shall be measured and paid separately under respective item herein after as 'Supply only').
2Labour only for attending day to day electric supply complaints of day to day mantenance of existing LT Panels involving replacement of meterials including connecting electrical accessories / spares of water supply installation from 0830 hrs to 1730 hrs and electrical fitting & light, short circuits in pump house including Note down the complaints from various locations in complaints register and distribution to the trademen complete all as directed. (Note:- (i) Any meterial required for atteding complaints shall be measured & paid seperately under respective item here after as 'supply only') (ii) The suitable shift duites as deems fit shall be decision of the Engr-in-charge
3Notes for Item No 1.01 & 1.02 :-(i) Any material required for attending complaints shall be measured & separately under respectvie items here - in- after.(ii) The complaints shall be attended and the defetcs shall be rectified by a team of matric qualified having minimum 03 years experienced electrician/Plumber as applicable assisted with adequate No of helpers as directed by Engineer-in-charge.(iii) The complaints shall be attended & defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 200/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor's dues.(iv) In case, after checking & attending the defect, it is not possible to rectify the defect within 08 hrs, the facts shall be brought to the notice of Engineer-in-charge by the contractor/his rep. If Engineer-in- charge is satisfied with contractors view, no recovery will be made.(v) While attending the complaint of water supply if earth work is required then the same shall be measured and paid seperately under appropriate item of Sch 'A' of BOQ. However, no extra payments shall be made for dewatering.
4(vi) Cutting of GI pipe in position and threading is also deemed to be included in the job rate (Fittings and fixtures will be measured and paid separetely under respective items of Sch as 'supply only').(vii) All T&P required for attending the Complaints shall be provided by the contractor.) (viii) The Pipe Fitter shall always be in possession of die set complete with cutters,Taps, Pipe wrench, Chain wrench, Caulking tools, complete set of spanners and ladders etc as required at site. (ix) The Electrician shall always in possession of all Electrician tools, LT Megger, Earth Tester, Multimeter, Crimpling tool, insulation tape, Hand gloves etc required at site. (x) Rate for taking down/out existing & fittings & fixtures and refixing to make it functional shall be into account. All the fitting & fixtures shall be measured and paid supply only in respective items .(xi) A BOO ordered for material procured by contractor and taken on charge through RV and complaint wise dockets will maintained and USR's duly vetted by AO GE (E/M) for procured materials issued for incorporation in work will be mentioned in BOO. BOO will concorn/approved by Accepting Officer in one time for complete materials to be consumed in work and if any balance quantity of material left with contractor the same will received back on credit USR's & kept on record.
5Supply only of GI socket Med grade ISI marked of following sizes :
615 mm bore
720mm bore
825mm bore
940mm bore
1050mm bore
11Supply only of GI Elbow Med grade ISI marked of following sizes :
1215 mm bore
1320mm bore
1425mm bore
1540mm bore
1650mm bore
17Supply only of GI Union Med grade ISI marked of following sizes :
1815 mm bore
1920mm bore
2025mm bore
2140mm bore
2250mm bore
23Supply only of GI Nipple of different length as per requirement, both end screwed Medium Grade, ISI marked of following size:-
2415 mm bore
2520mm bore
2625mm bore
2740mm bore
2850mm bore
29Supply only GI Reducing socket Med grade ISI marked of following sizes :
3020mm x 15 mm bore
3125mm x 15mm bore
3225mm x 20mm bore
3350mm x 40 mm bore
34Supply only GI Tee of different length as per requirement, both end screwed Medium Grade, ISI marked of following size:-
3515mm x 15mm x15 mm bore
3620mm x 20mm x 15 mm bore
3720mm x 20mm x 20 mm bore
3825mm x 25mm x 20 mm bore
3925mm x 25mm x 15 mm bore
4025mm x 25mm x 25 mm bore
4140mm x 40mm x 20mm bore
4240mm x 40mm x 25mm bore
4340mm x 40mm x 40mm bore
4450mm x 50mm x 15mm bore
4550mm x 50mm x 20mm bore
4650mm x 50mm x 25mm bore
4750mm x 50mm x 40mm bore
4850mm x 50mm x 50mm bore
49Supply only GI solid plug heavy duty ISI marked of following sizes :
5015 mm bore
5120mm bore
5225mm bore
5340mm bore
5450mm bore
55Supply only in replacement PVC 'L' type Holder, Aluminium rod, Float Ball etc complete all as required at site and all as directed of following Size:-
5615 mm bore
5720mm bore
5825mm bore
5950mm bore
60Supply only PTMT Float valve with epoxy coated aluminium rod and high density HDPE ball (as per manufacturer's instructions) of following sizes complete of following sizes :
6115 mm bore
6220 mm bore
6325 mm bore
6450 mm bore
65Supply only gun metal gate valves with iron wheel head screwed both ends for iron pipe, ISI marked, as per IS : 778 of following sizes complete all as specified and as directed:-
6615 mm bore
6720 mm bore
6825 mm bore
6950mm bore
70Supply only in replacement GI Reducing Elbow medium grade ISI marked of the following sizes :-
7120mmx15mm bore
7225mmx15 mm bore
73Supplying and fixing in replacement 3 layer PP-R pipes of following Material & Labour for rubber gasket joint including jointing material for CI/DI Pipe of following sizes complete all as specified and as directed .
74100 mm bore
75150 mm bore
76Labour only for run lead joint by using new lead and new spun yarn including jointing material for CI/DI pipes of following size/bore. (Note: Run lead and spun yarn used for repairing the joints following sizes of pipe will be measured and paid seperately under respective items as supply only.)
77100 mm bore
78150 mm bore
79Supply and Fixing in replacement of CI Foot valve of following size , Flanged ends, Swing type opration with rubber sheet as per IS-4038 including taking out unserviceable of following sizes complete all as specified and directed by Engineer-in-Charge. Note :- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this items.
8080 mm dia
81100 mm dia
82150 mm dia
83Supply and fixing DI Joint/MJ Collar including its all necessary fittings all as per IS: 9523 (2000) in replacement of following sizes complete all as specified and directed by Engr-in-Charge.
84100 mm dia
85150 mm dia
86M&L fabrication /welding work of MS Header /any size upto 400 mm MS pipe at various pump house for arresting leakages on header complete all as specified and directed.
87Supply only of Lead Pig bar of standard quality inclosed container complete all as specified and directed.
88Supply only Spun yarn of best quality in bundles complete all as specified and directed.
89Supply only 25 to 150 mm long, 6 to 20 mm dia nuts, bolts & washers complete all as specified and as directed.
90Taking up or down GI steel tubing of following sizes with connections from Trenches/floors/walls including cleaning for refixing or removal complete all as specified and as directed. Note :- Excavation & earth work shall be measured & paid separetely.
9115 mm bore
9220 mm bore
9325 mm bore
9440 mm bore
9550 mm bore
96Refixing/ relaying, jointing and testing old GI steel tubing of following sizes, retrieved under srl No 21 here-in-before in new or old position at walls,ceiling or floor etc including cleaning or rerunning the old screw threads, with & including providing new GI fittings complete all as specified and as directed. Note :- Excavation & earth work shall be measured & paid separetely.
9715 mm bore
9820 mm bore
9925 mm bore
10040 mm bore
10150 mm bore
102Supply of GI steel tubing medium grade of following size in old or new position as in ceiling/walls/Floors with necessary fixing arrangements and including providing new GI fittings complete all as specified and as directed.Note :- Excavation & earth work for new locations shall be measured & paid separetely.
10315 mm bore
10420 mm bore
10525 mm bore
10640 mm bore
10750 mm bore
108Cutting the existing steel tubing of following size bore for addition & alteration or lengthening screw on pipe to form connector complete all as specified and as directed.
10915 mm bore
11020 mm bore
11125 mm bore
11240 mm bore
11350 mm bore
114screwing the existing steel tubing of following size bore for addition & alteration or lengthening screw on pipe to form connector complete all as specified and as directed.
11515 mm bore
11620 mm bore
11725 mm bore
11840 mm bore
11950 mm bore
120Taking up or down CI/DI Pipe of following sizes including all fittings) with spigot and socketed ends and lead tyton joints including burning out lad joints and recovering lead and including cleaning for refixing or removal complete all as specified and as directed.(Note:- Excavation and earth work will be measured and paid separately.
121100 mm bore
122150 mm bore
123200 mm bore
124Supply, laying jointing, testing of DI pipe with class-K-7 spigot socketed ends, conforming to IS-8329 laid in trenches including providing route indicators of suitable height and laying at spacing of @ 50m center to center at GL mentioning name of contractor, date of execution & CA No with name of work & rubber gasket (Tyton) joints with jointing material & route indicators of the following sizes including taking down of existing CI/DI pipe complete all as specified and directed by Engineer-in-Charge.Note: - Excavation & earth work shall be measured and paid seperately under respective items of BOQ.
125100 mm bore
126150 mm bore
127200 mm bore
128M&L CI/DI fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs of following size confirming to IS: 1538-1993 complete all as specified and directed by Engr-in-Charge.
129Upto 150mm bore
130200mm bore to 300mm bore
131Opening of existing sluice valve including opening of gland cover taking out with stem nut of brass or of stainless steel & refexing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and as directed of following sizes.(Note:- Spare parts under relevant items shall be measured and paid separately under respective items.)
13280 mm bore
133100 mm bore
134150 mm bore
135200 mm bore
136Supply only 'stem' made out from stainless steel of sluice valve of following sizes, complete all as specified and as directed.
13780 mm bore
138100 mm bore
139150 mm bore
140200 mm bore
141Supply only 'Stem Nut' made out from stainless steel suitable to match with existing sluice valve, sizes as under, complete all as specified and as directed.
14280 mm bore
143100 mm bore
144150 mm bore
145200 mm bore
146Supply only 'Gland Plate' made out from Cast Iron suitable to match with existing sluice valve, sizes as under, complete all as specified and as directed.
14780 mm bore
148100 mm bore
149150 mm bore
150200 mm bore
151Supply only 15 mm bore Bib tap of PTMT, any tint, high pressure screwed for male/ female threaded, for pipe of size 15 mm bore (but not less than 75g/each) complete all as specified and as directed.
152Supply and fixing in replacement rotational moulded polyethylene water storage tank, cylindrical vertical with closed top, 500 litres capacity, tripple layered, hoisted and fixed in position after taking down as existing at site (of any capacity) complete all as specified and as directed..
153Supply and fixing in replacement rotational moulded polyethylene water storage tanks, cylindrical vertical with closed top, 1000 litres capacity, tripple layered, hoisted and fixed in position after taking down as existing at site (of any capacity) complete all as specified and as directed.(Note for ser item No 35 & 36 :- (i) For Pump Priming purpose in pump house.(iii) Tank shall be provided on PCC (1:2:4) type B-I using 20mm graded crushed stone aggregate ramp of 150mm thick round shape over roof slab or in ground floor over sub base of PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate and top surface of ramp finished even and smooth using extra cement complete the cost of ramp will be deemed included in quoted unit rate.)
154Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level complete all as specified and as directed.
155Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.
156Removing excavated material to a distance not exc 50 m and depositing where directed not exc 1.5 meters above the starting point complete all as specified and as directed.
157Removing weeds and wild grass inside the installations using chemical spray and trimming trees and unwanted plants using petrol operated Tree/Grass cutting tools and dressing of the surface by scrapping high patches and filling low patches with the scrapping soil to give an even and neat look to the site and disposing off all the unwanted grass, bushes and debris complete all as specified and directed by the Engineer-in-Charge.
158Supply only Switch Piano flush type 5/ 6 amps single pole one way 240 volts complete all as specified and as directed.
159Supply only Switch Piano flush type 15/16 amps, single pole, one way, 240 volts complete all as specified and as directed.
160Supply only Switch Socket combination 2 in 1, 3/5 pin, 5/6 amps 240 volts complete all as specified and as directed.
161Supply only Switch Socket combination 2 in 1, 3/5 pin, 15/16 amps 240 volts complete all as specified and as directed.
162Supply only MCB SP, 6 to 32 Amp 'C' curve, 240 volts complete all as specified and as directed.
163Supply only PVC insulated multistranded single copper conductor wire of size 1.5 Sqmm, 1100 volts grade fixed on panels/walls complete all as specified and as directed.
164Supply only PVC insulated multistranded single copper conductor wire of size 2.5 Sqmm, 1100 volts grade fixed on panels/walls complete all as specified and as directed.
165Supply only LED batten arrow for multi application suitable for 18 Watts with & including necessary cable connection to make it functional complete all as specified and as directed.
166Supply only PVC insulated multistranded single copper conductor wire of size 4 Sqmm, 1100 volts grade fixed on panels/walls complete all as specified and as directed.
167M&L for painting of Sluice Valve , NRV , Stainer of size upto 400 mm dia bore with one coat of super enamelled paint including preperation of old surface complete all as specidied and as directed .
168Material & Labour for painting on steel and iron circular surfaces with one coat of synthetic enamel paint as per existing colour scheme or pattern complete all as specified and directed
169S&F of CI NRV of following sizes complete all as specified and as directed :
17080mm dia
171100 mm dia
172150 mm dia
173S&F in replacement of 3 P power contactor of ML 1.5 complete all as specified and directed by Eng in charge
174S&F in replacement of 3 P power contactor of ML 3 complete all as specified and directed by Eng in charge
175Supply and laying of rubber insulated mat of size 2.00 mtr * 1.00 mtr of 19 mm thick ISI marked complete all as specified and as directred by by Eng in charge
176Supply and fixing LED street light fitting 70Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
177An amount of Rs 1,12,407.00 shall be deducted from BOQ on account of schedule of credit Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58352852
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 41.94 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Petty Repair For Attending Day To Day E/M External Water Supply Complaints And Electrical Complaints Of Shankar Vihar, Lower Shankar Vihar, Vikram Vihar, Otm-I, Signal Enclave, And Adjoining Areas Under Age (U) Water Supply No-Iii, Under Ge (U) Water Supply, Delhi Cantt-10
Basic Detail
Tender No GE/WS/Token No-61 OF 2026-27
Bidding Type Tender
Location
City New Delhi
State Delhi
Key Dates
Publish Date 03 Nov 2026
Submission Date 25 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 41.94 Lakhs
Tender Fee 500
EMD 83880
Exemption Available
Document List
BOQ_894122.xls
c8806077-cc07-4403-b86a-2488a79b63aa.html
tender.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 03, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_894122.xls

html

c8806077-cc07-4403-b86a-2488a79b63aa.html

pdf

tender.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender