Defence Statutory Bodies & Commissions/Committees Closing in 1 days TDR #58352850

Tender For Repair/Maint Of External Water Supply System Incl Repair/Replacement Of Unsv Pipe Lines,Valves,Valves Pit Chamber, Various Motor Pump Sets, Cleaning Of Sumps And Other Connected Work At Shakurbasti Under Ge(North) Delhi Cantt-10

Issued by Statutory Bodies & Commissions/Committees · New Delhi, Delhi
Tender Value
41 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
1 days left
EMD
82000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair/Maint Of External Water Supply System Incl Repair/Replacement Of Unsv Pipe Lines,Valves,Valves Pit Chamber, Various Motor Pump Sets, Cleaning Of Sumps And Other Connected Work At Shakurbasti Under Ge(North) Delhi Cantt-10

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 04-Nov-2026 REVISED TENDER DOCUMNTS Other 23-Nov-2026

BOQ

Name of Work:- REPAIR/MAINT OF EXTERNAL WATER SUPPLY SYSTEM INCL REPAIR/REPLACEMENT OF UNSV PIPE LINES,VALVES,VALVES PIT CHAMBER, VARIOUS MOTOR PUMP SETS, CLEANING OF SUMPS AND OTHER CONNECTED WORK AT SHAKURBASTI UNDER GE(NORTH) DELHI CANTT-10
Sl. No. Item Description
1Excavation in trenches not exceeding 1.5 mtr depth width and not exceeding 1.5m depth for laying pipes or for other work in loose/soft soil complete
2Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete
3Removal of surplus soil obtained from excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete
4Taking up existing CI Pipe water mains incl fittings and relaying, jointing and testing of same in to trenches in position after cleaning and removal of scale/blockage complete for the following sizes (Note- Lead joint shall be measured and paid separately) :-
580 mm bore
6100 mm bore
7Supply, laying, jointing and testing of CI Pipe with spigot & socketed end, centrifugally cast, Class LA, with rubber ring/ jointing material, push on joint laid in trenches in old/ new route as required at site including taking down the old/ unsv pipe line complete all as specified & directed of following sizes (Note : Excavation and earth work shall be measured and paid separately under respective items of schedule) :-
880 mm dia
9100 mm dia
10150mm dia
11M&L for CI fittings, ISI marked, bends (any type, radius & angle) tapers any type (straight, bend, increasing decreasing or double socket etc) tee piees, single branch, 'Y' junction, double branch cross (socket & spigot or flanged) collars, caps & plugs for spigot socketed pipes upto 150 mm bore complete
12M&L for run lead joint incl jointing material for CI pipe for following sizes including burning & removing old lead joint complete :-
1380mm dia
14100mm dia
15150mm dia
16M&L for heavy duty CI Sluice Valve of pressure class PN-1.6 type flanged and drilled at both ends, conferming to ISI mark and having gun metal spindle and rings including wheel for operating all as specified including two numbers flanged socket and jointing materials such as bolts, nuts, washers, rubbers/ fibre board gasket including taking down old unserviceable valve from pipe line of both ends complete of following sizes :-
1780 mm dia
18100 mm dia
19150 mm dia
20Cutting of existing CI pipe for insertion of CI specials /valves etc. all as required including dewatering of leakage water etc complete for the following sizes :-
2180mm dia
22100mm dia
23150mm dia
24Refixing/ Relaying only GI pipe in position with all fittings after cleaning and removal of scale/blockages effectively incl taking out from trenches complete all as specified and directed for following sizes (Note : Excavation and earth work shall be measured and paid separately under respective items of schedule) :-
2515 mm bore
2620 mm bore
2725 mm bore
2840 mm bore
2950 mm bore
3080 mm bore
31Supply, laying, jointing & testing of GI Pipe, medium grade, including all fittings in old/new position, laid in trenches/ wall including taking down the old/unsv pipe line complete all as specified & directed of following sizes (Note : Excavation and earth work shall be measured and paid separately under respective items of schedule) :-
3280 mm dia
3350 mm dia
3440 mm dia
3525 mm dia
3620 mm dia
3715 mm dia
38Supply, laying, jointing & testing centrifugally cast (spun) Ductile Iron pressure pipes, 100mm Dia, socketed & spigot ends, class K-7 with push on joints ISI (IS:8329-2000) marked in any length, laid in trenches all as specified and directed by JE/Engr-in-charge
39M&L Ductile Iron fittings, IS-1538 marked viz bends, tapers, reducers, tee pieces (single or double branch) any type, angle/radius and straight connecting pieces, any type of end (flanged/socketed/spigot as reqd at site) but all ends flanged, size of pipe upto 150 mm bore, complete all as specified.
40M&L for Servicing of DG set, 3 phase, 30 KVA capacity, 415 volt, 50 Hz of Make-Ashok leyland with replacing the air filter, diesel filter, super by pass filter, lubricating filter,heavy duty coolant,15W40 lubricating oil (Make-HP/castrol/Valvoline/CAT), fuel pipe with bengo bolt, hose pipe complete set and vent housing with clamp incl servicing and cleaning of radiator & alternator assembly & diesel tank as per manufacturer instructions incl testing after repair & servicing all as specified and directed (Note:- Servicing of DG set shall be valid for 6 months or 250 Hrs which is earlier)
41All as per item No 51 but of DG set, 3 phase, 160 KVA capacity, 415 volt, 50 Hz of Make- Greaves Cotton
42S&F in repair maintenance free Lead Acid battery 180 AH,12 Volt including connection of following capacity complete.
43Drilling and tapping cast iron water mains (in position) for branch connections of 15 to 25 mm bore including necessary fittings and mild steel brackets complete
44S&F in repair heavy duty flanged GI pipe 100 mm bore including GI flanged bend with nut bolt and washer complete
45M&L for construction of brick masonary valve pit chamber including necessary excavation and earthwork, PCC, brick work,12 mm thick rendering in cement mortar 1:4 on internal surface of valve pit and mild steel sheet cover 3mm thick and mild steel angle iorn frame size 40 x 40 x 5 mm around of valve pit, locking arrangement with pad lock of size 50 mm brass, 6 leavers and key complete including two coat of synthetic enamel over a coat red oxide primer on steel surface with preparation of surface and including dismantling of existing valve pit complete all as specified & directed for following sizes :-
46Size 600 mm X 600 mm X 600 mm
47Size 900 mm X 900 mm X 900 mm
48Size 1200 mm X 1200 mm X 900 mm
49M&L for preparing the surfaces of wall of pump house/OH/UG sumps of size 600x450 mm and applying one coat of synthetic enamel paint (bule/Black) and written on it in white paint as 'Date of cleaning, Due date of cleaning, capacity of pump etc of letter not less than 35 mm height complete all as direceted
50M&L for writing letters or figures (Block, Roman, Italic or Indian) n exc. 30 cm high with synthetic enamel paint on existing steel/ RCC wall surface with synthetic enamelled paint complete
51S&F in repair heavy duty Brass forged Ball valve, screwed down high pressure 25 Kg/Cm2 with iron handle, screwed both ends complete for the following sizes of pipes :-
5250 mm dia
5340 mm dia
5425 mm dia
5520 mm dia
5615 mm dia
57S&F in repair direct on line starter 415 volt, 50 Hz with voltmeter, Ammeter, relay, timer and single phase preventor complete for following pump set capacity :-
581/1.5 HP Pump Set
593 HP Pump Set
607.5 HP Pump Set
61S&F in repair CI non return valve 100 mm dia, heavy duty, class PN-1.6 flanged end complete
62Supply only Calcium hypochlorite 65% to 70% chlorine content in granual form(calcium based granular disinfect for water treatment) packed in 45 kgs each drum.
63Supply only bleaching powder Calcium Hypochloride minimum 32% cholorine as per IS-1065:1989 in 25 Kg Bag (Note :- Fresh lot of bleaching powder shall be supplied with in 45 Days from date of manufacturing as per monthy demand or as directed)
64Supply only MBBR-specific biological culture consisting of active aerobic and nitrifying microorganisms, suitable for sewage treatment in MBBR process complete as directed by Engineer-in-Charge.
65M&L for chlorine test kit with coloured sample complete with all testing fitment and OT solution in rexine finish box.
66M&L for replacement of industrial copper conductor submersible cable, PVC insulated and PVC sheathed cable, 1100 volt grade of size 4 sqmm x 3 core .
67Taking up submersible pump set upto 7.5 HP with MS column pipe from borewell and lowering the same after repairing with electric connection complete all as directed
68M&L for replacement of heavy duty MS column pipe, 50 mm dia, 3 m long flanged welded complete
69Cleaning of underground/semi underground sump by taking out all sludge, silt from bottom and cleaning all inside walls with wire brush and brooming the walls and top ceiling/roof including washing the walls with fresh water mixed with bleaching powder and draining out complete sludge, silt etc from bottom of the sump and applying one coat of lime wash for the UG sump of capacity 50,000 gallons complete all as directed.
70Cleaning of RCC OH tank, by taking out all sludge, silt from bottom and cleaning all side walls with wire brush and brooming the walls and ceiling/roof including washing the walls with fresh water with bleaching powder and draining out complete sludge, silt etc from bottom of the tank and applying one coat of lime wash inside complete for walls and roof/ceiling of 12 mtr approx staging for the following capacity :-
711,00,000 gallons
7250,000 gallons
73M&L for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron strip of size 32 x 6 mm as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil complete all as specified and shown in electrical plate No 3 of SSR 1991(Part-I) complete all as specified and directed
74Dismantling of pump set upto 7.5 HP from rusted base frame and refixing the same on new base frame complete (Note : MS base frame will be measured & paid seperately)
75M&L for replacement of PVC 100mm Heavy duty suction hose pipe for sewage well/sump of any size complete all as per directed
76S&F in repair of good quality tyre rubber coupling (No.TC/0/015-2913 DE) suitable for 40 HP / 30 HP pump set (Make-Unique/Form-Flex/HIC/Mahalaxmi/Metro)
77S &F in repair of good quality tyre rubber coupling (No. TC/P/014-2514-PX) suitable for 40 HP / 30 HP pump set
78Dismanlting and disconnection electrical and water connection of the pump and transport to work shop & opening carefully and servicing complete with replacing of bushes, gland packing, ball bearing, rubber gasket, nut and bolt and re-fixing it in original position and making out all electrical and water connection incl painting to two coats with synthetic enamell paint after necessary prepartion incl testing & commissioning complete for following capacity :- (Note :- Replacement of impellor rewinding of motor shall be measured and paid separately)
797.5 HP
8030/40 HP
81M&L for rewinding of submersible motor with PVC insulated copper winding wire of existing gauge and size for following capacity. :-
82From 3 HP to 7.5 HP
83M&L for rewinding of electrical motor, 3 phase with super enamelled copper winding wire/ PVC insulated copper winding wire of existing gauge and size to get proper speed and load with removing burnt winding wire for following capacity of motor :-
8430/40 HP
85S&F in repair motor relay suitable for high pressure pump 3 HP, 230 volt
86S&F pump capacitor 50 MFD, 440 Volt
87S&F pump capacitor 25 MFD, 440 Volt
88M&L for stainless steel wire rope (ss-304) size 8 mm dia with 2 nos holding clamps suitable for hanging of sewage submersible pump complete all as directed
89M&L for cutting of road/path (width-25 cm x 40 cm) for laying of pipe line and making good to disturbed road/path including provision of PCC 1:2:4 type B-1 using 20 mm graded stone aggregate all as specified
90M&L for spray painting of complete water pumpset of cap 7.5 to 40 HP with two coats of synthetic enamelled paint of specified colour after preparation of surface
91M&L for painting of water supply pipes networks of 80/100/150 mm dia consisting of valves any type/ size at various pump houses inlcuding duly scrapping thoroughly the existing corroded paint / dirt/ dust / rust and preparing the surface and applying two coats of synthetic enamel paint over a coat of red oxide primer as per the colour code and marking the water flow directions on pipe lines as directed.
92Collecting water sample in clean bottle from borewell/ UG sump/service tank and getting Chemical, Boilogical, Potability Testing of water sample (as per IS 10500:2012) at Govt recognised/approved institute/Lab for potability and chemical analysis complete all as specified & directed
93S&F in repair 3 pole power contactor, type MNX-32 with coil voltage 230 Volt incl connection complete
94S&F in repair bolted fuse link type HG, 4 amp size F-1
95S&F in repair heavy duty electric motor terminal block 70 amp, 415 Volt for 40 HP/ 30 HP motor complete (Make-Elmex/Wago/Phoenix)
96S&F in repair heavy duty electric panel mounted terminal block 40 amp, 2 row, 4 way complete
97S&F in repair din type terminal block 16 amp, 2 row, 12 way complete
98S&F heavy duty GI pipe 40mm/50mm bore with heavy duty GI socket and taking up old pipe alongwith submersible pump set of any capacity from borewell and lowering the same complete all as directed Please Enable Macros to View BoQ information
99S&F heavy duty GI pipe 40mm/50mm bore with heavy duty GI socket and taking up old pipe alongwith submersible pump set of any capacity from borewell and lowering the same complete all as directed Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58352850
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 41 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/Maint Of External Water Supply System Incl Repair/Replacement Of Unsv Pipe Lines,Valves,Valves Pit Chamber, Various Motor Pump Sets, Cleaning Of Sumps And Other Connected Work At Shakurbasti Under Ge(North) Delhi Cantt-10
Basic Detail
Tender No GE/NORTH-169/2026-27
Bidding Type Tender
Location
City New Delhi
State Delhi
Key Dates
Publish Date 04 Nov 2026
Submission Date 23 Nov 2026
Open Date 01 Jan 0001
Finance
Tender Value 41 Lakhs
Tender Fee 500
EMD 82000
Exemption Available
Document List
BOQ_894047.xls
ea9161ae-2ea8-4ca5-9509-b538c2092c43.html
Gen169.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 04, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 1 day
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
xls

BOQ_894047.xls

html

ea9161ae-2ea8-4ca5-9509-b538c2092c43.html

pdf

Gen169.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender