Public Administrative Department Local Bodies Closing in 8 days TDR #58352792

Tender For For Infrastructure Development At Government Homeopathic Medical College & Hospital Paraspani (Godda) Block-Pathergama District Godda

Issued by Local Bodies · Godda, Jharkhand
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Nov 2026
8 days left
EMD
5.30 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Godda → Jharkhand
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for For Infrastructure Development At Government Homeopathic Medical College & Hospital Paraspani (Godda) Block-Pathergama District Godda

BOQ

Name of Work:- For Infrastructure Development At Government Homeopathic Medical College & Hospital Paraspani (Godda) Block-Pathergama District Godda
Sl. No. Item Description
1GODREJ INTERIO Mid-back Chair With Fixed armrest with Padding GODREJ INTERIOR(GODREJ INTERIO RELAX 4 LEGS WITH ARMS & CASTORS)
2GODREJ INTERIO Modular Table with Particle Board Table Top and Wooden/Engineer Wood Understructure GODREJ INTERIOR(GODREJ INTERIO MINGLE UNITIZED MEM_6 seater TA)
3GODREJ INTERIO Floor Standing Rack (unit without door or closed compartment) with NA doorsGODREJ INTERIOR(Pigeon Hole Base 1200H Main &Add On)
4GODREJ INTERIO Steel Bookcases confirming to IS 7761 Grade 0 of IS 513 MSGODREJ INTERIOR(GI 4 DR BOOK CASE METAL TOP 1742 H x 914W x 320 D)
5GODREJ INTERIO Computer table with Storage unit with Particle Board Table TopGODREJ INTERIOR(COMPANION C11 COMPUTER TABLE)
6INTERIO BY GODREJ Mid-back Revolving Chair of Adjustable height with WheelsINTERIO BY GODREJR(Relax Revolving Chair)
7GODREJ INTERIO Rectangle Executive Table with Pedestal UnitGODREJ INTERIOR(GODREJ INTERIO Trident Middle Main Desk with ERU)
8AARIHANT CRAFT--GLOBAL MARKETING Cork core material type of 600 x 900 mm Pin Up Notice Board Without front coverAARIHANT CRAFTURUnregistered BrandManufactured by: GLOBAL MARKETING(BOARD)
9GODREJ INTERIO Floor Standing Storage Unit With door With Mild SteelGODREJ INTERIOR(GODREJ INTERIO VSDU 12 METAL TOP)
10Dell Entry Level Desktop Computer with Warranty 3 YearDellR(Dell OptiPlex 7020 SFF).Description of StoresDesktop Computer with Table Mount Monitor System with Compatible Chipset as per Processor Make with Minimum 6 USB PortComputer TypeEntry LevelProcessor NumberIntel Core i3 12100Factory Pre-loaded Operating System by Desktop OEMWindow 11 HomeRAM Size (Memory Card/Module) (in GB) (Capacity to be installed in the System)16Type of Storage Installed with the SystemNVMe-SSDSSD - Storage Capacity (in GB)512HDD - Storage Capacity (in GB)0 as SSD only InstalledAvailibility of MonitorYes as per IS 13252 (Part 1)Screen Size (in CMs)53.1 - 58 (20.91\\" - 22.83\\")
11HYBRID STREET LIGHT (USING SOLARAND GRID ELECTRICITY)
12Supply & Installation of Multisport Court Top Layer 12mm 8 layer Synthetic Acrylic flooring with Game line marking Scope of work: Synthetic acrylic flooring 8 layer with installation Primer (1) Resurfacer (2) ultra cushion (3) Acrylic (4) with game line marking etc.Layers Of Cushion(12MM)
13COUGAR Mild Steel Volleyball Pole of Height 10 foot foot COUGARR (VBP-006)
14COSCO SPORTS 9.5 m 3 Ply Cotton Brown Volleyball NetCOSCO SPORTSR
15cosco Acrylic Plain Basketball Board, Length 180 centimeter
16cosco Basketball Ring For training (solid steel with mounting plates)
17Basket Ball PolMetco Transparent acrylic material (for competition) Basketball Backstop With InstallationMetcoR(METCO 8004-25)e (6 Inch Dia 100 KG)
18KOXTANS 5.2 m (Singles) 1 Ply Cotton Brown Badminton Net KOXTANSPUTEX 5.2 m (Singles) Nylon Dark Brown Badminton NetPUTEXR (Badminton Net (V2) Conforming to IS 3345)
19KOXTANS Badminton Net Poles with Outdoor and Indoor Utility KOXTANSR (KOXTANS)
20WATER PURIFIER 200LPH
21SContract against Design, Manufacture, Testing, Supply, Installation & Commissioning of Grid connected Rooftop SPV Power Plants of different capacities including five years Comprehensive Maintenance Contract (CMC) on Turnkey basis on Government Buildings anywhere in the state of Jharkhand.Category-2
22GST @ 18%
23Labour cess @ 1%
24MV Cable:- Supply of ISI marked aluminiumcable conductor XLPE PVC insulated cable as per IS:7098 armoured, served, sheathed, 1100V grade with Termination and Laying of cable.3.5CX 25 sq. mm armoured AL Cable.
25S/F of XLPE insulated PVC sheathed (Heavy duty )armoured electric cable with aluminium conductor for working voltage upto and including 1100 volts conforms to IS: 1554 Part-1/IS:7098 of any reputedmake.16sqmm 4core
26MV cable laying upto 25 sq.mm. in same trench -Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 35 sq.mm. direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as require.
27Supplying, installation, testing and commissioning of cubical type MV Panel made out of 14 SWG sheet steel, totally enclosed IP-54 protection, free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 75mmx75mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switchgears. (Main LT panel) 125A TPN , MCCB (P-2), 35 kA - 01 No.
28Outgoing Feeders:-100A TPN MCCB - 01 No.
2963A TPN MCB - 07 Nos.
3040A TPN MCB, - 08 Nos.
31200A TPN Aluminium bus bar in metal encolsure with fixing clamps
3215/16 amps one way swith
33Supplying and drawing co-axial TV cable RG-6 grand 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/PVC conduit as required.
34Supply of 16m High mast light in two section Construction S355 grade as per BS-EN 10 025 Top Dia 100mm, bottom dia 360mm, plate thickness 3mm, 20side Polygon, galvanisation as per BS EN ISO 1461, base plate dia 570mm, base plate thickness 25mm, GI single spike lightining protection, maximum wind speed 47m/switch 8nos foundation bolts of pcd 445mm TS 600/30mm dia/850mm long. Luminaries carraige: material for 40 NB ERW Class B- M.S Pipe. dia of carraige ring 450mm (ID) with 8 arm, welded, 2 sections having carraying capacity upto 12 luminaries.Trailing Cable : 5core 2.5sq.mm. PVC flexible copper conductor winch/power Tool : Double drum , SWL 350kg with 0.75HP 6 Pole single speed integral motor Rope: Grade AISI 304, 7/19 construction, dia 6mm BLC 1450x2 having 2 nos of continues rope. Aviation obstruction light : twin dome aviation obstruction lights LED type as required. (But excluding Feeder Pillar)
35For 16 mtr. High Mast : ITC of the high mast and light fixture with the help of suitable tools and plants, wiring of luminaries with all wiring material like PVC insulated PVC sheathed flexible cable of suitable copper conductor lugs, MCB and all labour & construction of shallow foundation with M25 grade concrete for the high mast considering safe soil bearing capacity of 10T/ mtrs sq. for 12 M High mast.
36outdoor stand mounted feeder panel with 63 amp TP&N,MCB income ,45 amp TP contactor automatic swiching of luminaries,powetr tool control incomer ougoing terminal etc as reqd.(for high mast)
37EPR insulated /PVC sheated copper conductor trailing cable 5crore 2.5 sq.mm.(for high mast)
386MM DIA stainless steel wire rope of bracking load capacity 2350kg*2 for mtr high mast.
39winch /power tool for high mast of double drum
402.0 hp ac motor with AC motor with forward and reverse motion for highmast
41Twin dome avivation light for highmast
42Earthing with G.I earth pipe 4.5 mtr long. 40 mm dia including accessories, and providing masony enclosure with cover plate having locking arrangment and watering pipe etc.with charcoal and salt as required.
43Supply and election of LED flood light 200w fixer (make) bajaj havell philips
44Earthwork in excavation Trenches in hard soil (vide classification of soil item -B) all complete as per approved design, building specification and direction of E/I
45Extra for earthwork in hard soil as per specification and direction of E.I. (wide classification of soil item-B)
46Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)
47Providing coarse clean SAND FILLING in foundation trenches or plinth including ramming & watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials,labour, royalty and taxes all complete as per building specification and direction of E/I(Mode of measurement compacted volume)
48Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.
49Providing designation 75B one BRICK FLAT SOILING joint filled with local sand including cost of watering taxes royalty all complete as per
50Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)P.C.C in FOUNDATION
51Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)
52Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)R.C.C in foundation
53Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases ofcolumns, etc. for mass concrete
54Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominalsize)
55Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
56Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconiesand access platform
57Reinforcement for RCC work including straightening, cutting, bending, placing in position and bonding allcomplete.TMT-500 8mm dia
58TMT-500 12mm dia
59Providing designation 75 B BRICK WORK In C.M. (1:6) in foundation and plinth–--do ------
60Providing 12mm thick cement plaster (1:4) in WALL with materials ---do --- complete job as per specification anddirection of E/I.
61Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I.
62Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarsesand) :Medium shade pigment using 50% white cement, 50 ordinary cement
63Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steelprimer all complete
64Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
65Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete :Ridges plain (500 - 600mm)
66Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with sealring conforming to IS : 5382, leaving 10 mmgap for thermal expansion,110 mm diameter
67Cement
68Steel
69Stone Chips
70Red Brick
71Casement window double panels with French (False) Mullion with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles.Using R2 series with frame (39mm & above) x (39mm & above) & sash (39mm & above) x (60mm & above) & French (False) mullion (39mm & above) x (60mm & above). (Height upto 1.8 metre)
72Casement cum fixed panel window having one single casement panel & one fixed panel with S.S 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handlesUsing R3 series with frame (55mm & above) x (45mm & above) & sash (35mm & above) x (85mm & above) & mullion (55mm & above) x (55mm & above). (Height upto 1.8 metre, each openable shutter upto 0.8m width)
73GST @ 18%
74Labour cess @ 1% Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58352792
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 12-11-2026
Authority
Authority Name Zilla Parishad
Work Description Tender for For Infrastructure Development At Government Homeopathic Medical College & Hospital Paraspani (Godda) Block-Pathergama District Godda
Basic Detail
Tender No DMFT/ZP/GODDA/09/2026-27
Bidding Type Tender
Location
City Godda
State Jharkhand
Key Dates
Publish Date 03 Nov 2026
Submission Date 12 Nov 2026
Open Date 14 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee 10000
EMD 5.30 Lakhs
Exemption Available
Document List
aced75a4-f6ef-449c-b781-0e4602013b29.html
BOQ_163248.xls
Tenderdocument.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 03, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 12, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Nov 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

aced75a4-f6ef-449c-b781-0e4602013b29.html

xls

BOQ_163248.xls

pdf

Tenderdocument.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender