Tender For The Installation Of Environmentally Friendly Cremation Systems (Cccf) At The Cremation Grounds Located In The Municipal Council Area (Ramdwara City And Khairda, Man Town).
Tender Value
27.10 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
0 days left
EMD
54200
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sawai Madhopur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For The Installation Of Environmentally Friendly Cremation Systems (Cccf) At The Cremation Grounds Located In The Municipal Council Area (Ramdwara City And Khairda, Man Town).
BOQ
| Sl. No. | Item Description |
| 1 | NON BSR |
| 2 | SITC of Antyesthi Yantra with following specification - (A) Body MS. Sheet size 3mm & 2mm angle structure 50*50*5mm MS (B) Lining Fire bRick alumina 70% with ceramicsboard thickness 50 mm capacity 1260 C. (C) White heat Castable (k) and accost (50) for fire bricks feting (D)Angle 65*65*10 & 35*5 SS 304 grade (E) Rod 30 mm 370 mm SS 304 grade (F)Pipe OD 40mm thickness 5mm SS 304 grade (G) Ceramic Blanket (64D)total bolts & nut MS / SS (H)Thermostat Size 20mm OD *450 mm length (I)Control Panel auto and Manual Both (J)Blower complete wiith fan size 305 mm with air controlled system (K) Motor 1 HP rpm 1440 (L) Chimni Length 3 meter size 350x350mm taper sheet thikness 3 mm with ceramic board lining. (M) Ceramics board fitting 50 mm and 25 mm (N) Both side SS door with lock size - 600 x 550 mm thickness 4 mm SS 304 grade 50 mm ceramic board and ceramic blanket (OI Sliding Trolly alignment bed angle size 50x50mm + 35x35mm + strip, length 4.5 meter Rpe size 75x75mm, 40x40mm & round 40mm ceramic board & ceramic blanket lining. (P) Sliding Trolly cover 1750 x 1 180 x 440 mta sheet size 3 ouo with bearing roller Pipe size 7sx75 mm, 40x40mm & round 40 mm ceramic board & ceramic blanket lining. (Q)Sliding Asthiya & Ash collecting Trey Size 2200 x 350 x 110 mm sheet thickness 3 mm with roller SS 304 grade (R) donator name plate size 600x406 mm MS eheet 'S) Coated with heat resistance paint with capacity of 600 degree silver colormm with air controlled system |
| 3 | SITC of Inverter with batteries with: O/P Voltage: 220 V O/P Current: 12 amp AC Nominal I/P Current: 12 amp AC max O/P Power: 2 KVA Power Factor: 0.8 Frequency: 50 Hz Including 12 V, 150 Ah battery rack and battery bank comprising SMF/VRLA batteries, inter-connection wiring, etc., as required, complete in all respect. |
| 4 | based on Ruidp 2023 |
| 5 | Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus as ner excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. In all types soils/ saturatèd soil such as moorum, sand, sandy silt, olay, black cotton soil, kankar, etc. Depth upto 1.5 m |
| 6 | Random rubble masonry with hard stone in foundation and plinth Cement mortar 1:6 (1 cement: 6 coarse sand) |
| 7 | Cemant plastering including T&P scaffolding, material and complete labpour,including cost of water ,uring, racking of joints etc. with 20 mm cement plaster of mix: cement mortar 1:4 (1 cement: 4 coarse sand) |
| 8 | Providing: corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers_filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in itch in horizontal/, vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m² |
| 9 | Brick work with FPS bricks of class designation 75 jn foundation and plinth in:Cement mortar 1:6 (1 cement: 6 coarse sand) |
| 10 | Steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded Land bolted including sne and bolted including special shaped washers etc. complete. Hot mplete Hot finished welded type tubes |
| 11 | Plain cement concrete 1:3:6 mix with crushed stone aggregate mechanically mixed, placed in foundation and compacted by vibration including curing as per clause 1000 &1700 of MoRT&H specification including all material, labour form work, machinery Using stone aggregate 20 mm nominal size |
| 12 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 Kg Cement up to 900 gms per Cum of Concrete/ mortar.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars. |
| 14 | Centring and shuttering with plywood or steel sheet upto two stories ( each story of height upto 3.5 metre from floor level) including strutting, propping etc. and removal of form for :Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 15 | Random rubble dry stone Kharanja (soling) under floor. |
| 16 | Earth filling with available surplus soil excavated from foundations and taken only from outside of building plinth in layers not exceeding 20cm in depth, consolidating each deposited layer including ramming and watering and consolidation with lead up to 50 m and lift upto 1.5 m. |
| 17 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 18 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer. |
| 19 | Painting two coats on specified surface with synthetic enamel paint of approved brand and shade, after thorough cleaning and necessary filling to give even shade as per clause 803 of MoRT&H Specification including all material, labour. On new plastered concrete surface |
| 20 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 21 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender