Tender For Repair And Maintenance Of Critical Civil/Masonry & Concrete Work In Msp
Tender Value
20.08 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
3 days left
EMD
34044
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanniyakumari → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Critical Civil/Masonry & Concrete Work In Msp
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removal of R.R. masonry/brick masonry/plain cement concrete work, etc. height upto 15m and dumping the debris within a lead of 500m by means of manually/mechanically, with necessary scaffolding, staging, safety arrangements, etc. complete as per specification and as directed by the Engineer-in-charge. |
| 2 | Dismantling and removal of RCC foundation/ column/slab/beam, etc. in all heights upto 15m and dumping the debris within a lead of 500m by means of manually/mechanically, with necessary scaffolding, staging, safety arrangements, etc. complete as per specification and as directed by the Engineer-in-charge. |
| 3 | Dismantling and removal of floor (Ellis Pattern)/ terrace finish/weathering course/ paver block/ tiles/plastering area, etc. upto 4.5m height including neat cleaning and dumping the debris within a lead of 500m etc. by means of manually/mechanically with necessary scaffolding, staging, safety arrangements, etc. complete as per specification and as directed by the Engineer-in-charge. |
| 4 | Cutting, dismantling of RCC column/beam/slab, brick wall, etc. upto 15m height from ground level by using necessary cutting machine including neat cleaning and shifting/dumping the cut down blocks/ debris within a lead of 500m by means of manually/mechanically with necessary scaffolding, staging, safety arrangements, etc. complete as per specification and as directed by the Engineer-in-charge. (Note: The work shall be carried out near the running plant, necessary scaffolding, safety precaution shall be carried out separately without affecting the plant operation). |
| 5 | Dismantling and removing of damaged steel structural fully/partly such as roof/side cladding, purlin, trusses, bracings, columns, etc. i.e. MS angle, channels, plate, beam, etc. at all heights using proper tools and plants without damaging the adjacent structures including providing temporary supports for the structure at dismantled portion and nearby structures lowering the dismantled items carefully and stacking materials useful for reuse at convenient place as directed by the company authorities and depositing the waste materials in the scrap yard including all labour charges, hire charges for tools and plants loading, unloading charges, providing necessary scaffolding, safety arrangements etc. complete as per standard specification. |
| 6 | Earthwork excavation for foundation in all types of loose/hard soil and depositing the spoils with an initial lead of 20m and lift upto 2m including refilling etc. by means of manually/mechanically complete as per specification and as directed by the Engineer-in-charge. |
| 7 | Supplying, providing & laying RR masonry foundation/wall/retaining wall in cement mortar 1:6 for construction of wall using hard blue granite stone, etc. complete from 2.5m below ground level to 4.5m height above ground level with neat finishing including proper pointing & necessary scaffolding work etc. complete as per standard specifications and as directed by the Engineer-in-charge |
| 8 | Supplying, providing and laying brick masonry in CM 1:6 using well burnt country brick of minimum size 22.9x11.2x7cm for foundation/kerb wall/wall upto 4.5m height from ground level including all scaffolding, staging, curing, safety arrangements, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 9 | Supplying, providing and laying brick masonry in CM 1:6 using well burnt country brick of minimum size 22.9x11.2x7cm for superstructure walls from 4.5m to 15.0m height and above including all scaffolding, staging, curing, safety arrangements, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 10 | Supplying, providing and laying PCC 1:2:4 mix for foundation/ flooring work/kerb wall drainage wall using 20mm and below grade hard blue granite jelly including all form works, mixing, laying consolidation and curing, including all scaffolding, staging, safety arrangements, etc. complete as per standard specifications and as directed by the Engineer-in-charge. |
| 11 | Supplying, providing and fixing twisted reinforcement IS 1786 HYSD bars Fe500D/Fe550D (TMT bars - TATA/ Agni/ JSW) including fabrication, cutting, bending, cold tying, with overlapping to the standard length wherever necessary and placing the reinforcement in position as per the direction of Engineer-in-charge including binding, provision of spacer bars, cover blocks and all other incidental charges, necessary scaffolding, staging, safety arrangements, etc. complete for all RCC works (item No. 12) upto 4.5m height as per standard specification and as per the direction of Engineer-in-charge. |
| 12 | Supplying, providing and laying cement concrete 1:1.5:3 for RCC works height upto 4.5m using 20mm and below grade hard blue granite jelly with specified reinforcement (rate excluding the cost of reinforcement) and all mixing, laying, compaction, leveling, consolidation and curing, etc., including the cost of centering/shuttering work, necessary scaffolding, staging, safety arrangements, etc. complete as per the specification and as per the direction of Engineer-in-charge. |
| 13 | Supplying, plastering with CM 1:4 mix 15mm thick one coat floated hard & trowelled smooth etc for floors & walls upto 4.5m height with neat finishing and necessary grouting, scaffolding, staging, safety arrangements, etc. and mix with water proofing compound (Dr. Fixit), fibre mesh, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 14 | Supplying, plastering with CM 1:4 mix 15mm thick one coat floated hard & trowelled smooth etc for floors & walls from 4.5m to 15m height with neat finishing and necessary grouting, with water proofing compound (Dr. Fixit), fibre mesh, including scaffolding, staging, safety arrangements, etc. and mix complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 15 | Supplying, plastering with CM 1:3 mix 12mm thick one coat floated hard & trowelled smooth for RCC beam, column, ceiling, wall & floor upto 4.5m height with neat finishing and necessary grouting, with water proofing compound (Dr. Fixit), fibre mesh, including scaffolding, staging, safety arrangements, etc. and mix complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 16 | Supplying, providing and laying with 9mm thick vitrified-Marbonite /matte finish tiles of size 1200mmx 600mm (Kajaria/ Somania /Qutone brand) with Cement Mortar 1:2 and pointing, (apply spacer joint, epoxy joint-wherever required) including finishing the joint and pointing flush with the surface with necessary scaffolding, safety arrangements, etc. complete as per specification and as directed by Engineer-in-charge. |
| 17 | Supplying, providing and fixing 15-18 mm thick jet black/coffee brown/tan brown granite slab for wash basin/ kitchen/ store room area, etc. including grinding & finishing the ends with half round and closing the joints with matching colour cement and polishing the slab to smooth finish, etc, complete as per the specification and as directed by the Engineer-in-charge. |
| 18 | Supplying, providing and fixing 50/60mm thick coloured (red/yellow/black/Grey) square/Zig-zag/ Hexagon/ Rectangle shape concrete paver block of size 200x100mm/ 150x300mm/ 250x100mm/ 200x120mm/ 220x270mm/ 200x200mm pattern floor, bottom laying with 6mm jelly of 50mm thick over the earth surface including levelling the earth surface with neat finishing, side packing etc. complete as per the specification and as per the direction of the Engineer-in-charge. |
| 19 | Supplying, providing & fixing aluminium partition with 5mm thick plain glass consists of 1.20 to 1.50mm thick powder coated aluminium frame of size 63x38mm verticals at 1m or nearest centre to centre and top and bottom consisting of 5mm thick plain glass rubber beading including providing aluminium door consist of vertical and top horizontal frame and bottom 100x44.50mm and 5mm thick plain glass at top and 4.00mm thick hylam sheet including EPDM rubber beading at bottom with door divider, aluminium clips, brass pivot, hinges, door lock and door closer Dyna/Everite/Yama make, etc. including all other accessories, necessary scaffolding, safety arrangements, etc. complete as per the specification and as directed by the Engineer-in-charge. |
| 20 | Supplying, providing & fixing 5mm thick plain glass of the existing aluminium partition with EPDM rubber beading, aluminium beading with necessary accessories including dismantling of damaged glass in the existing alluminium partition, with necessary scaffolding, safety arrangements, etc. complete as per the specification and as directed by the Engineer-in-charge. |
| 21 | Supplying, providing and fixing 1st class Teak wood paneled fixed window of overall size 2.8x1.9m consists of outer teak wood frames 150x100mm with 12mm thick toughened glass including necessary fixing arrangements with polishing of teak wood & clean, neat finishing including necessary scaffolding & safety arrangements, etc. complete as per specification and as per the direction of Engineer-in-charge. |
| 22 | Supplying, fabricating and fixing of required size ISI standard 'C' class heavy type GI pipe framed with Terracotta Jali ventilator: Frame consist of GI pipe inside fixing with eco-friendly Terracotta Jali (Nuvocotto/Clyton or equivalent make) of size 200 x 200 x 60mm made of natural clay and of approved design & pattern (swastik/required pattern) and in natural clay finish. The weight of each jali is 2.0 to 2.55 kg. It should be free from any kind of defects like chipped off or broken corners, all-weather resistance, Fungus & algae free, 100% Asbestos-free (Fireproof), 100% termite free, etc. Joining of tiles to be done using 10mm thick partially light weight highly polymer modified and highly flexible adhesive as per IS 15477 : 2019: TYPE 3 MYK LATICRETE 335 MAXI multipurpose LFT Adhesive or equivalent. For all levels and all heights, with necessary grouting, and neat finishing, etc. including removing the existing louver windows with wooden frame and necessary chipping and leveling the surface, etc. complete as per specification and as directed by Engineer-In-Charge. |
| 23 | Supplying, providing and fixing Nuvocotto/ Clayton or equivalent make and Eco-friendly Terracotta Jali of size 200 x 200 x 60mm made of natural clay and of approved design & pattern (swastik/required pattern) and in natural clay finish. The weight of each jali is 2.0 to 2.55 kg. It should be free from any kind of defects like chipped off or broken corners, all-weather resistance, Fungus & algae free, 100% Asbestos-free (Fireproof), 100% termite free, etc. Joining of tiles to be done using 10mm thick partially light weight highly polymer modified and highly flexible adhesive as per IS 15477 : 2019: TYPE 3 MYK LATICRETE 335 MAXI multipurpose LFT Adhesive or equivalent. For all levels and all heights, including necessary chipping and leveling the surface with necessary grouting etc. complete as per specification and as directed by Engineer-In-Charge. |
| 24 | Supplying and painting two coats with epoxy smoke grey paint (Asian/Berger/Shalimar) over a coat of epoxy zinc-chromate/zinc-phosphate primer (Asian/Berger/Shalimar) at all heights including chipping, scrapping and cleaning the surface with necessary scaffolding, staging, safety arrangements, etc. complete as per standard specification and as directed by Engineer-in-charge. |
| 25 | Supplying and painting two coat with emulsion paint (Asian/Berger/Nippon) 1st quality of approved shade over a coat of primer for the external/ internal masonry surface at all heights from ground level, including thorough scrapping, cleaning, removal of dirt, all tools & tackles, sandpaper and scaffolding arrangements, etc. and applying putty touch-up works wherever required, etc complete as per specification and as per the direction of Engineer-in-charge. |
| 26 | Supplying and painting two coat with 1st quality enamel / touch wood paint of approved shade (Asian/Berger/Nippon) matching to the existing for all doors, windows, false ceiling, etc. over a coat of wood sealer/primer and putty wherever required including thorough cleaning and removal of dirt and necessary scaffolding arrangements, upto 15m heights, etc. complete as per specification and as directed by the Engineer-in-charge. |
| 27 | Supplying and painting one coat with Fluorescent paint (Asian/Berger/Nippon) White/ Yellow/ Red, etc. of approved shade with 5mm thick for the floor of the buildings/road of 4.5m height from ground level, including thorough scrapping, cleaning and removal of dirt of existing surface by using air compressor, necessary scaffolding, safety arrangements, etc. complete as per specification and as directed by the Engineer-in-charge. |
| 28 | Supplying and painting two coat of water proof wall putty (Asian/Berger/Nippon) at external /internal surface of the buildings upto 15m height from ground level, including thorough scrapping, cleaning, removal of dirt of existing surface including all tools & tackles, sand paper, necessary scaffolding & safety arrangements, etc. complete as per specification and as directed by the Engineer-in-charge. |
| 29 | Engagement of Carpenter for miscellaneous works complete as directed by the Engineer-in-charge (Required materials will be issued by company on free of cost). |
| 30 | Engagement of Fitter for miscellaneous works complete as directed by the Engineer-in-charge (Required materials will be issued by company on free of cost). |
| 31 | Engagement of Mason for miscellaneous works complete as directed by the Engineer-in-charge (Required materials will be issued by company on free of cost). |
| 32 | Engagement of labour (Mazdoor) for miscellaneous work complete as directed by the Engineer-in-charge (Required materials will be issued by company on free of cost). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender