Tender For Provn Of Centrifugal Pump Set And Connected Works And Provn Of Auto Change Over Switch For Air Conditioners Installed At Ups Room Of Icsc At Hqtc Banglaore
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Nov 2026
2 days left
EMD
6866
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Centrifugal Pump Set And Connected Works And Provn Of Auto Change Over Switch For Air Conditioners Installed At Ups Room Of Icsc At Hqtc Banglaore
BOQ
| Sl. No. | Item Description |
| 1 | Supply, fixing, testing and commissioning of electronic Air Conditioner Duty Cycling Timer Controller suitable for automatic alternate operation of existing 1.5 TR to 2.0 TR Split Air Conditioners, operating on 230 Volts, single phase, 50 Hz AC supply, complete with microprocessor/ electronic timer having adjustable duty cycle, adjustable ON-delay timer for compressor restart protection, Auto /Manual mode selection, LED indications for Power ON, Timer ON, Auto Mode and Manual Mode operation, built-in control relays /contactors of suitable rating, terminal blocks, internal copper wiring and powder-coated sheet steel enclosure. The controller shall automatically switch operation between the two air conditioners at preset time intervals to ensure equal running hours and balanced wear of compressors and shall provide adjustable time delay for restarting the compressor after power failure /restoration. The controller shall be suitable for continuous operation in UPS rooms, communication rooms, server rooms and similar critical installations. Item includes taking connections from existing air conditioner control circuits, making necessary terminations, fixing on wall, testing of auto /manual operation, timer sequence, delay functions complete all as specified and as directed by Engr-in-charge. |
| 2 | Material and labour for submain wiring with two runs of PVC insulated multistranded copper conductor 4.0 sqmm and one run of earth continuity conductor with PVC insulated multistranded 4.0 sqmm copper conductor drawn in and including PVC conduit accessories laid on surfacesurface/ recessed of wall /roof etc., with accessories for two pin and earth plug and socket complete including connected to earth dolly complete all as specified and as directed by Engr-in-charge.Note: Two run of 4.00 sqmm single core cable and one run 4.00 sqmm earth wire including PVC conduit together will be measured as one unit. |
| 3 | Material and labour for submain wiring with two runs of PVC insulated multistranded copper conductor 4.0 sqmm and one run of earth continuity conductor with PVC insulated multistranded 4.0 sqmm copper conductor drawn in and including PVC casing caping accessories laid on surfacesurface/ recessed of wall /roof etc., with accessories for two pin and earth plug and socket complete including connected to earth dolly complete all as specified and as directed by Engr-in-charge.Note: Two run of 4.00 sqmm single core cable and one run 4.00 sqmm earth wire including PVC casing and capping together will be measured as one unit. |
| 4 | Material and labour for cutting hole into stone masonry wall not exc 450mm thick, built in cement mortar, using stone drilling machine for inserting 65mm dia (50.24 sqcm) PVC pipe including making good the disturbed surfaces complete all as specified and as directed by Engr-in-charge. |
| 5 | Supply and fix sheet metal enclosure for DB's double door SPN, 4 ways when MCBs to be used single pole and neutral, deep drawn with 200 Amps rated copper bus bar 230 Volt complete all as specified and as directed by Engr-in-charge. |
| 6 | Supply and fix MCB SPN, 40 Amps, 230 V, C-series with breaking capacity of 10 KA complete all as specified and as directed by Engr-in-charge. |
| 7 | Supply and fix MCB SP, 6-32 Amps, 230V, C-series with breaking capacity of 10KA complete all as specified and as directed by Engr-in-charge. |
| 8 | Supply, installation, testing and commissioning of Horizontal Centrifugal Pump Set of 7.5 HP capacity suitable for operation on 415 Volts, 3 Phase, 50 Hz AC supply, capable of delivering water against a total delivery head of 20m with minimum suction head of 6m, complete with centrifugal pump having cast iron casing, dynamically balanced bronze/ gunmetal impeller, stainless steel shaft, mechanical seal /gland packing arrangement, anti-friction bearings and directly coupled to a 7.5 HP squirrel cage induction motor, TEFC enclosure, IP-55 protection, Class-F insulation, mounted on common fabricated M.S. base frame including foundation bolts, grouting and alignment complete all as specified and as directed by Engr-in-charge. |
| 9 | M&L for Providing and laying cement concrete 1:2:4 type B-1 (Using 20mm graded crushed stone aggregate) as pump foundation/ pedestal for 7.5 HP horizontal centrifugal pump set including excavation in any type of soil, dressing, levelling, ramming, disposal of surplus earth within 50m lead, formwork, finishing top surface, embedding foundation bolts, curing, making pockets for holding down bolts, filling pockets with non-shrink cement mortar, grouting beneath base frame with approved non-shrink grout complete all as specified and as directed by Engr-in-charge.Note: The foundation shall be of adequate size to withstand vibration and operational loads of the pump and motor assembly. Foundation bolts shall be cast into concrete and aligned with base frame holes. After installation and alignment of the pump set, the gap between base frame and concrete foundation shall be filled with approved non-shrink grout. The foundation top shall be finished smooth and level to ensure proper alignment and vibration-free operation. |
| 10 | Supply, installation, testing and commissioning of fully automatic star-delta starter suitable for 7.5 HP, 415 Volts, 3 Phase, 50 Hz squirrel cage induction motor complete with sheet steel dust and vermin proof enclosure, TPN MCCB incomer, three AC-3 duty contactors, adjustable electronic timer, thermal overload relay, phase sequence and phase failure protection relay, under voltage and single phasing protection, ON/OFF push buttons, Auto/Manual selector switch, RYB phase indicating lamps, ammeter with selector switch and CTs, voltmeter with selector switch, internal copper control wiring, terminal blocks, cable glands, lugs and all accessories complete, suitable for continuous operation, including complete all as specified and as directed by Engr-in-charge. |
| 11 | Supply and laying GI tubing 50mm dia medium grade icluding all fittings as per site requirement in trenches/ fixed on walls/ roof/ fixed inside the shallow well complete all as specified and as directed by Engr-in-charge. |
| 12 | Supply and fixing all necessary G.I./M.S. nipples, sockets, unions, 90° bends, 45° bends, reducers, M.S. slip-on flanges, rubber insertion gaskets, galvanized nuts, bolts, spring washers, plain washers, Teflon tape and all accessories required for complete interconnection of 50mm dia suction and delivery piping upto foot valve, pump, sluice valve, including cutting, threading, welding, flanging and jointing complete all as specified and as directed by Engr-in-charge. |
| 13 | Supply and fix 50 mm NB cast gun metal (G.M.) foot valve conforming to IS:4038 /latest, with screwed /flanged ends suitable for 50mm dia heavy class G.I. suction pipe, complete with stainless steel (SS-304) strainer, renewable seat and disc, phosphor bronze/gunmetal internals, non-corrosive hinge pin, rubber sealing arrangement and all accessories necessary for smooth operation. The foot valve shall be capable of maintaining prime and preventing reverse flow during stoppage of the pump. The item includes jointing with Teflon tape/hemp and red lead, nipples, sockets, unions, cutting, threading, testing and commissioning complete all as specified and as directed by Engr-in-charge. |
| 14 | Supply and fix sluice valve of 50mm dia with cast iron wheel stainless steel spindle , quality conforming IS-14846:2000 class PN-1.6 ISI marked complete all as specified and as directed by Engr-in-charge. |
| 15 | Supply and fix 25mm dia gun metal gate valve non rustable spindle with cast iron wheel ISI marked suitable for screwing in GI pipes complete all as specified and as directed by Engr-in-charge. |
| 16 | Supply and laying 4 Core, 4 sqmm copper XLPE /PVC cable from starter to motor including glands and lugs complete all as specified and as directed by Engr-in-charge. |
| 17 | Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edged of the plate not less than 1.5m below normal ground level, connected to galavanised iron earth lead by means of bolt, nut, check nut and washer of galavanised iron steel wire 4mm dia as earthing lead as shown in Electrical Plate No 4 of SSR Part I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/ loose soil, earth pit in PCC 1:3:6 type C1 (Using 20mm graded stone aggregate), funnel, 20mm dia GI med grade water pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs, funnel and wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not exc 50m all as shown in electrical plate No.4 of SSR part No1 complete all as specified and as directed by Engr-in-charge.Note: The unit rate includes main earthing lead galavanised iron steel wire 4mm dia with 15mm dia GI light grade earth lead protection pipe from earth electrode to test point upto 7.5m. |
| 18 | Supply and fix for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing 4mm dia galvanised iron or steel wire complete all as specified and as directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender