Tender For Renovation Of Anganwadi Building At Malayankulam Village In Adachani Panchayat In Kadayam Panchayat Union.Union General Fund 2026-27
Tender Value
3 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
2 days left
EMD
3000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tenkasi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Anganwadi Building At Malayankulam Village In Adachani Panchayat In Kadayam Panchayat Union.Union General Fund 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | 1.Renovation of Anganwadi Building at Malayankulam village in Adachani Panchayat. |
| 2 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete. |
| 3 | Plastering with cement mortar 1:5 mix to 12 mm thick including Cost and Conveyance of all materials to site and all labour charges etc complete for 10 sqm. |
| 4 | Dismantling and Removal for One Course of Pressed tile Roof finish in Cement Mortar including all cost and conveyance all labour charges etc complete. |
| 5 | Finishing the top of roof with one course of PRESSED TILES of size 23 cm X 23 cm X 2 cm laid in cement mortar 1:3 (One cement and three Sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight. |
| 6 | Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete |
| 7 | Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete. |
| 8 | Painting two coats over old iron work such as doors, windows, ventilators, windows bars, balustrades etc., with best approved best quality of synthetic enamal paint of approved colour over the existing priming coat etc., complete. |
| 9 | Painting two coats with approved Black Oxide for Old Black Board over the cement platered surface including cost and conveyance of paint and all labour charges etc complete |
| 10 | Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour for open PVC light point / fan point for electronic regulator) (Assume 5 points per coil) SD-18 |
| 11 | Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL SD-83 |
| 12 | Wiring with 2 x 1.5 sqmm PVC unsheated Sc alu cable of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113 mm T.W Switch box in flush with wall covered with nylon sheet of 3mm thick 5 Amp 3 pin for open PVC plug point SD 36 |
| 13 | Supply and fixing fancy glass shade and 11 V CFL for BH point SD 80 |
| 14 | Supply and fixing of single box type 4feet 40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting.-SD-88 |
| 15 | Supply and fixing of 1200mm(48inch) AC Celling fan complete with stepped electronic 300 W Requlator with 300mm down rod on the existing clamp SD-110 |
| 16 | Supplying and fixing P.V.C rainwater down fall pipe of 110mm dia with necessary shoes, bends,& clamps etc., |
| 17 | Provision for Toilet and Septic tank Arrangements |
| 18 | Earth work excavation in hard stiff clay soil with initial lead and lift as per SS 20B for corewall etc., complete. |
| 19 | Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum. |
| 20 | Random rubble masonry in cement mortar 1:5 mix with simultaneous pointing including cost and conveyance pf all materials to site and all labour charges etc complete for 10 cum |
| 21 | Brick work in cement mortar 1:5 mix using country bricks 83/4\\"x4 1/4\\"x2 3/4\\" and conveyance of all materials to site and all labour charges etc complete For 10cum |
| 22 | Supplying and fabrication of steel including cost and conveyance of bending to shape and tying in position and forming grills for all R.C.C works including cost and conveyance of all materials to site |
| 23 | Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete for 10 cum. |
| 24 | Centering charges for all concrete works including all cost and conveyance of all materials and all labour charges etc., complete. |
| 25 | Refilling the basement with excavated earth including all labour charges such as watering and ramming etc complete. |
| 26 | Labour charges for fixing of steel door,steel window,Ventilators including cost and conveyance of all materials to site and all labour charges etc complete. |
| 27 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete. |
| 28 | Plastering with cement mortar 1:5 mix to 12 mm thick including Cost and Conveyance of all materials to site and all labour charges etc complete for 10 sqm. |
| 29 | Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete |
| 30 | Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete |
| 31 | Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete. |
| 32 | Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete. |
| 33 | Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm colour glazed earthern ware of approved quality and brand with \\"P\\" or \\"S\\" trap conforming to BIS with Sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two Sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. |
| 34 | GST Amount for providing Service to Government Contract Works for the above RENEWAL Works. { GST Amount is the Total GST Amount for overall quoted amount above this row in column \\"BB\\" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender