Tender For repair maintenace Of Pump House For The Year 2026-27.Sub Work:- Replacement Of Damaged Cables, Servicing Of D.G Set, Valve, E.O.T I/C Supplying & Laying Of M.S Pipe And Supply, Installation, Testing and Commissioning Submersible Pump Set E
Tender Value
38.85 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
1 days left
EMD
77701
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for repair maintenace Of Pump House For The Year 2026-27.Sub Work:- Replacement Of Damaged Cables, Servicing Of D.G Set, Valve, E.O.T I/C Supplying & Laying Of M.S Pipe And Supply, Installation, Testing and Commissioning Submersible Pump Set Etc. At Escape Drain No.1 Pump House Near Rd400m (I&Fc).
BOQ
| Sl. No. | Item Description |
| 1 | Supplying Laying & fixing of J4X 25 sq mm PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables (30 mtrs) for Voltage Grade 1100 Volts conforming to IS:694:2010 for KRTK350-500/1006 pumps with Cable Gland and Seal direct on surface etc complete as reqd. (Make- Havells, Grandlay, KSB etc. or approved by Engineer-in-charge). |
| 2 | Supplying Laying & fixing of J12X 1.5 sq mm PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables (30 mtrs) for Voltage Grade 1100 Volts conforming to IS:694:2010 for KRTK350-500/1006 pumps with Cable Gland and Seal direct on surface etc complete as reqd. (Make- Havells, Grandlay, KSB etc. or approved by Engineer-in-charge). |
| 3 | Servicing of 200 KVA D.G set complete by replacement of all Filters, Oil, Coolant, Primary AF Element, Gasket rocker cover, labour charge etc complete as reqd. at site. |
| 4 | Repairing, Servicing and Greasing of Single Girder EOT crane comprising of Main Girder, End carriages -02 nos with long travel motors i/c Repairing of limit switche, electric panel, wiring and complete painting etc. as required. |
| 5 | Servicing & Repairing of valve by dismantling the head and replacement of New check nut, threading of spindle etc. complete for smooth working as reqd. at site |
| 6 | Supplying, installation, testing and commissioning of 100 watt New generation energy saving & environmental friendly, long life, High-pressure die-cast aluminium housing Flood Light with toughened Glass cover including connection making, taping etc. as required at site. (Make:- Phillips/Bajaj/Crompton/Halonix/ Havells/C&S/Intelux or as approved by Engineer-in-charge). |
| 7 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.150 mm width X 50 mm depth X 1.6 mm thickness |
| 8 | Supplying, fabrication and installation of following sizes of MS pipes i/c cutting, welding, painting with rubberised paint & fixing in position i/c making fabrication and installing with heavy duty hydra etc as required with special hoist, highly skilled riggers with safety belts etc complete as required. (Pipe make:- Jindal/ Surya/ Tata or as approved by Engineer-in-charge)500 mm dia 6.0 mm thickness |
| 9 | 200 mm dia 6.0 mm thickness |
| 10 | Supplying, fixing and welding of following sizes of MS heavy duty flanges/Dead Flanges complete with water proof gasket, nuts bolts etc as required. 500 mm dia 25 mm thick Flange |
| 11 | 200 mm dia 20 mm thick Flange |
| 12 | Manufacturing, Supplying & Fixing of Rubber Gasket of thickness 6mm or more for following sizes M.S. Pipeline Flange as required at site. 500mm dia. |
| 13 | 200mm dia. |
| 14 | Manufacturing & Supplying of Nut,Bolts & Washers etc. of size 7/8\\" x 6\\" as required at site. |
| 15 | Supplying and laying of following size DWC Flexible Heavy Duty pipe ISI marked along with all accessories like socket, bend, couplers etc. complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 102 mm dia (OD-120 & ID-103 mm nominal). |
| 16 | Supplying, Installation, testing and commissioning of submersible pump set for sewage handling non clog free flow type capable of handling solid upto 80 mm size suitable to give discharge of 150 cum/hr at a head of 12-15 mtr with minimum 15 mtr cable and maintenance free antifriction bearing with permanent grease filled for life with special metal carbide seals complete with motor moisture detection , thermal protection device and reverse rotation protection system to sense the direction of rotation and signals the motor to trip in case of reverse rotation, with complete accessories, It should have low level cut off through electrode type level sensor. (Delivery Flange 150 mm dia) The pump set shall be with rated output of 21.0 KW,27 HP suitable for operation on 415+/- 5% volts three phase electric supply and with IP 68 protection complete with lifting chain, The motor should have “F” Class Insulation complete etc. as required. i/c making MS stool arrangement for placing the sewage submersible pumps set with MS angle of size 50 X 50 X 6 mm thick with positioning in the sump with the help of chain pully tripod stand i/c all type of fabrication work etc complete as reqd. |
| 17 | Supplying, installation, testing and commissioning of fully automatic control panel suitable for 21 KW, 27 HP sewage submersible pump set having suitable contactors for star delta-starter, ammeter, voltmeter, overload relay, dry run protection, thermal protection, indicating lamps, ON/OFF Push button, SPP, all duly wired in MS fabricated indoor type box complete etc. as required. |
| 18 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender