Tender For Day To Day Maintenance Of Sanitary And Plumbing Works In Bhatpara State General Hospital, Barrackpore Special Correctional Home, Barrackpore Police Case Hospital And Barrackpore Morgue Under Barrackpore Sub-Division-I,Pw.D Of North 24-Parg
Tender Value
2.99 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
6 days left
EMD
5994
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Maintenance Of Sanitary And Plumbing Works In Bhatpara State General Hospital, Barrackpore Special Correctional Home, Barrackpore Police Case Hospital And Barrackpore Morgue Under Barrackpore Sub-Division-I,Pw.D Of North 24-Parganas For The Period Of 6 Months During The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | TOTAL QUOTED AMOUNT |
| 2 | Non Schedule Item: PART A |
| 3 | Refixing G.I. pipe with fittings after cleaning where necessary. (i) 15 mm |
| 4 | Removing chokage in G.I. pipe including cleaning pipe. (i) 15 mm |
| 5 | Dismantling G.I. tank including disconnecting pipe connection. |
| 6 | Fixing G.I. tank in position including refitting pipe connection |
| 7 | Supplying, fitting and fixing Waste fittings complete. (a) C.P. over brass(i) 25 mm |
| 8 | Renewing brass spindle and valve of stop cock/bib cock/push cock/pillar cock. (i) 15 mm |
| 9 | Supplying, fitting and fixing pillar cock of approved make a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 10 | f) (i) CP Pillar Cock with 200 mm extended Lever Handle (Equivalent to Code No. 5031 & Model - FLORENTINE of JAQUAR or similar brand). |
| 11 | Cleaning wash basin/ sink with acid |
| 12 | Cleaning glazed tiles with acid. |
| 13 | Repairing damaged G.I. tank of any capacity after lowering on roof by replacing with new 2 mm thick G.I. sheet by rivetting with necessary packing, painting new portions, refixing the existing C.I. tank cover by rivetting in new position, if necessary, after taking out old cover very carefully etc. complete (excluding the cost of dismantling and refixing tank but including the cost of cutting out worn out portion by suitable means to regular shape). (Payment will be made on the basis of area of damaged portion replaced.) |
| 14 | Supply of G.I. union. (iv) 32 mm |
| 15 | Supplying, fitting and fixing low-down cistern parts (i) Internal fittings for cistern complete of approved make. |
| 16 | (ii) Outlet Assembly |
| 17 | (iv) Rubber Kid |
| 18 | (v) Knob |
| 19 | (vi) Brackets (pair) |
| 20 | Add: SGST 9 % + CGST 9% = 18 % |
| 21 | Labour Wellfare Cess 1% |
| 22 | 2.0 Schedule Item: PART B |
| 23 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall . 15 mm dia nominal bore. (A) Fopr Exposed Work (a) 15 mm dia medium quality. |
| 24 | 20 mm dia nominal bore |
| 25 | 40 mm dia nominal bore |
| 26 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter |
| 27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 15 mm nominal dia Pipes |
| 28 | 20 mm nominal dia Pipes |
| 29 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore |
| 30 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 31 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 32 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore. 15 mm dia. |
| 33 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
| 34 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineerin-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 35 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia upto 300 mm |
| 36 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 37 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink without drain board610x510 mm bowl depth 200 mm |
| 38 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32 mm dia |
| 39 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 40 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter |
| 41 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door. 110x110x110 mm |
| 42 | Bend 87.5° 110 mm bend |
| 43 | Shoe (Plain) 110 mm Shoe |
| 44 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. xvi) Pipe Clip. 110 mm |
| 45 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved qualityH D - 20Circular shape 560 mm internal diameter |
| 46 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge |
| 47 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 48 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan |
| 49 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid |
| 50 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 32 mm nominal bore |
| 51 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 40 mm nominal bore, 206 mm long, weighing not less than 690 gms |
| 52 | Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 100 mm diameter pipe |
| 53 | Modified estimated cost after using Correction facto on DSR-2023 on account of GST @ 0.973 as per O.M. issued by DG, CPWD vide no- 158/SE/(TAS)/GST/2024/02 Dated 08/08/2024 @ 0.973 |
| 54 | Add Enhancement for cost index @ 15% on DSR-2023 item(as approved cost index of barrackpore is 122 on DPAR-2023 (Base-100)as on 01/04/2025 vide letter no-34 (i)/SDG(Kol)/Cost Index/2025/1316) Dated 27.08.2025 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender