Tender For Special Repair To Bldg No P- 30/1, P- 30/2, P- 30/3 And P- 30/4 At Leimakhong Mil Stn Under Ge 869 Ews.
Tender Value
44.52 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
20 days left
EMD
89040
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangpokpi → Manipur
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P- 30/1, P- 30/2, P- 30/3 And P- 30/4 At Leimakhong Mil Stn Under Ge 869 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' |
| 2 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store & rubish of the permises complete all as specified and directed. |
| 3 | M & L for 25 mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified. |
| 4 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 5 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 6 | S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in CM (1:4) as backing coat to receive tiles complete all as specified and directed. |
| 7 | Demolition of stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and directed. |
| 8 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed 20mm thick in CM 1:3 complete all as specified and directed. |
| 9 | M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement rendering in cm 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as specified and directed. |
| 10 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 11 | S&F Pre- painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as specified. |
| 12 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip, straight flashing etc fixed with self tapping screws as specified. |
| 13 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. Note :-Dismantling of false ceiling to be carried out carefully without damaging existing fitting and fixtures of flase ceiling items |
| 14 | S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 22 x22 x0.35mm and main/cross tee of size 24 x38 x0.35mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed. |
| 15 | Taking down shutters of any description exc 2 sqm each including easing and adjusting and also refixing builder hardware as required including renewal of unserviceable screw and necessarry materials refixing shutter in same opening complete all as specifeid and directed. |
| 16 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc. 4 sqm each complete all as specified and directed. |
| 17 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed. |
| 18 | S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 19 | S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 20 | S&F 35mm thick 2nd class HW glazed skeleton shutters open rebated and prepared to receive glass gazed etc but divided into squares with plain chamfered or rounded mitred and rebated sash bar any numbers edges of framing plain chamfered or rounded fitted with cut and mittered beads for sceuring glass guage etc. size of members as specified in SSR pt-I section 8 clause 8.20(a) fitted to chowkhats complete all as specified and directed. |
| 21 | S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 22 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 23 | S&F 1st hard wood Louvred frames 80 to 100 mm wide with fixed louvres of 15 mm to 20 mm thick, frame put together with glue, pinned at joints, supplied and fixed complete all as specified and directed. |
| 24 | Supply and fixing factory made UPVC white color Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm) , sliding sash (42mm x 67mm). Sliding mesh sash (42mm x 57mm) sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm) , Glazing bead (24.5mmx 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 + -0.2mm thick galvanized steel frame (30mm x 18mm) 2 nos, sliding Sash (30mm x 18mm),sliding mesh sash (26mmx10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners ,Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system. stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor includes cost of glass and all other connected accessories. Net opening will be measured for payment purpose) (A) Area not exceeding 2.00 sqm each complete all as specified and directed |
| 25 | M&L for Anodised aluminium grill DG-104 (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15 ) of approved design/pattern , with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer - in - charge complete all as specified and directed. |
| 26 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed |
| 27 | S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed. |
| 28 | S&F 75 mm long butt hinges medium weight cold rolled stainless steel complete all as specified and directed. |
| 29 | S&F 150 mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed. |
| 30 | S&F 200 mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed. |
| 31 | S&F 150 mm long aluminium alloy handles,fabricated type, anodised complete all as specified and directed. |
| 32 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with 140mm overall length of cover plate complete all as specified and directed. |
| 33 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed. |
| 34 | M&L for cupboard shutter in required size at site made out of 20mm rigid PVC sheet consisting of carcase & provision of shutter are required brackets 5.5 screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 1mm edge bend type or 90 degree edge bend finish as per make and specification mentioned as per drawigs. Various thickness of PVC celuka sheet manufactured by ISO 9001-2015 satisfied company termite proof, water proof and flame retardant PVC sheet. PVC cabinet of required sizes fabricated by joining for 20mm rigid PVC sheet fixed with each other using solvent cement adhesive and screws and 6mm PVC sheet as backing of cabinet fixed with screws and solvent cement adhesive etc. PVC shelf/ partition of required size consisting of panel 20mm rigid PVC sheet and for supporting the hold of shelf, partition and shall provided 3 edges in sizes 20mm x 20mm as per required length. The front side of the edge visible in the front of the shelf. Partition to be edge lipped by 20mm width into 1mm edge bend tape of density 600 kg per Cum with necessary connected items like handle, hinges etc complete all as specified and directed by Engr-in-Charge and manufactures specifications and drawings. |
| 35 | S&F in repair fancy type harrison rail ,20mm dia mild steel ,chromium plated with fixing brackets,stops,rollers etc. for window and doors with curtain rings and decorative doom holders fixed to wall with screw complete all as specified and directed. |
| 36 | Dismantling weather boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 37 | M&L for 2nd class hardwood weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and directed |
| 38 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed. |
| 39 | M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed. |
| 40 | M & L for brick work with sub class ‘B’ brick straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed. |
| 41 | Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 42 | M&L for rendering 15mm thick in CM 1:4 on on fair surfaces of brick in two separate coats (10mm thick backing coat and 5mm thick top coat) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing works/concrete surfaces finished even and smooth complete all as specified and directed.(using Dimapur Sand)Note : (i) WPC will be measured and paid separately (ii) Rates deemed to be inclusive of scaffolding upto height 12 Mtr at reqd places. No additional payment will be made on this account. |
| 43 | M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finishing fair and even without using extra cement complete all as specified and directed.(using Dimapur Sand) |
| 44 | M&L for rendering 5mm thick on fair face of brick work or concrete surface wall or ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as specified and as directed. (using Dimapur Sand) |
| 45 | Supply only intergral water proofing compound complete all as specified and directed. |
| 46 | Material and labour for preparation of surface wall for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Deopt Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces complete all as specified and directed. NOTE: -(a) Primer/ putty and emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands / chajja / building edges / borders / projections where contrasting colour as specified and directed is to be applied. (b) Rates deemed to be inclusive of scaffolding up to the height of 12 mtr at required places. (c) 05 year guarantee of painting work will be admissible after date of completion and 10% amount will be reserve against painting work after date of completion for the 05 years. |
| 47 | M&L for preparation of new or previously untreated surfaces of walls and applying two coats of oil bound distemper paint over a coat of primer and 1mm thick wall care putty complete all as specified and as directed. |
| 48 | M&L for Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches and one coat of oil bound distemper as required compelete all as specified and directed. |
| 49 | M&L for Preparation of old decorated surfaces on ceiling. including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on ceilings complete all as specified and directed. |
| 50 | M&L for preparation of surfaces plastered or unplastered new surface on ceiling and applying three coats of white washing complete all as specified and as directed. |
| 51 | M&L Preparation of old painted surfaces of wood based material exc 10 cm width or girth & applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and directed. |
| 52 | M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed. |
| 53 | M&L for preparation of old painted surfaces of steel of any description over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 54 | M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 55 | Demolition of cement concrete (unreinforced) PCC in any description and in any portion not otherwise specifically provided complete all as specified and directed. |
| 56 | M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in benching, bed coping for manhole, drain including slightly rounded or chamfered angles and including necessary form work finishing exposed surface complete all as specified and directed. |
| 57 | M&L for Plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregates) as in surface channel, bed of drains incl form work / moulds complete all as specified and directed. Note:- (1) Using Dimapur sand. |
| 58 | M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms, molds mitred / stopped ends etc complete all as specified and directed. Note:- (1) Using Dimapur sand. |
| 59 | Demolition Cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness below or above ground level complete all as specified and as directed. |
| 60 | M&L for 75mm thick cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in plinth protection including finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.(Using dimapur sand) |
| 61 | M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed. |
| 62 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed. |
| 63 | S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc .Fe 410-gde -E250 quality-A complete all as specified and directed |
| 64 | Taking up or down 15mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 65 | Taking up or down 20mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 66 | S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 67 | Supplying and laying of 16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified. etc complete all as specified and directed. |
| 68 | Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and as directed. |
| 69 | S&F in repair 15mm bore bib taps, cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferule complete all as specified and directed. |
| 70 | S&F PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and directed. |
| 71 | S&F in repair 32mm dia Waste coupling of PTMT (half or full threaded)suitable for urinals complete all as specifed and directed. (Minimum weight 45gms) |
| 72 | S&F in repair Pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, but fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 73 | S&F in repair of 15mm bore stop valves of cast copper alloy fancy type, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 74 | S&F in repair brass chromium plated shower roses 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union any colour for fixing with 15mm pipe complete all as specified and directed. |
| 75 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 76 | S&F in repair in Vitreous china wash basin,white flat back,size 630X450 mm including brackets PVC waste pipe 32 mm dia , 32 mm dia waste coupling PTMT (half or full threaded ) ,fibre reinforced PVC connection 45 cm long with PTMT nuts at both end complete all as specified and directed. |
| 77 | S&F in repair vitreous china European type wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat cover closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 lit capacity of Commander make white in colour and PVC flush pipe 32mm dia complete complete all as specified and directed. |
| 78 | S&F in repair Angle stop valve of PTMT of any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 79 | S&F in repair Soap dish, CP, white, approximate size 160x 160x90mm Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in- Charge |
| 80 | S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 81 | S&F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 82 | S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall with steel clamps complete all as specified and directed. |
| 83 | S&F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joint fixed to wall with steel clamps complete all as specified and directed. |
| 84 | S&F 110mm bore PVC (SWR) bends complete all as specified and directed. |
| 85 | S&F 75mm bore PVC (SWR) bends complete all as specified and directed. |
| 86 | S&F PVC (SWR), junction single, (Single Y) equal or unequal 110mm dia with access door complete all as specified and directed. |
| 87 | S&F PVC (SWR), junction single, (Single Y) equal or unequal 75mm dia with access door complete all as specified and directed. |
| 88 | S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia with access door complete all as specified and directed. |
| 89 | S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia with access door complete all as specified and directed. |
| 90 | S&F PVC (SWR) vent cowl for 110mm bore pipe complete all as specified and directed. |
| 91 | M&L for 15mm thick rendering to sides and bottom of sunken slab in CM 1:3 mixed with water proofing compound, finishing the surfaces even and smooth without using extra cement complete as specified and directed.(Using Dimapur Sand)(Note: WPC will be measured and paid separately) |
| 92 | M&L for 25mm thick cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in sunken floors complete all as specified and directed. |
| 93 | M&L for PCC 1:4:8 Type D2 (Nominal mix) (using 40mm graded stone aggregate), as in foundation, filling and mass concrete complete all as specified and as directed.(Note:- using dimapur sand) |
| 94 | S&F GI medium grade spouts 40mm dia projecting at least 20 cm clear of the wall complete all as specified and directed. |
| 95 | M&L for applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical surfaces and floor of sunken slab after laying all CI connection branch pieces etc after covering joints with PCC 1:2:4 type B1 complete all as specified and directed. |
| 96 | M&L PCC 1:7:12 type F2 (using 40mm graded stone aggregate) with bricks as in filling of sunken slab after laying and carrying out required tests for CI pipes joints complete all as specified and directed. |
| 97 | S&F in repair stainless steel sink with drainage board 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 98 | S&F in repair stainless steel wall mounted modular kitchen plate rack of size 750mm x 900mm x 250mm, rectangular in shape glossy finish Mount Type Wall Mount 5 shelves brand silver shine made of stainless steel .50mm thick complete all as specified and directed. |
| 99 | S&F 75mm dia PVC (SWR) floor trap, plain with grating including setting and jointing with solvent cement complete all as specified and directed. |
| 100 | S&F in repair Salt-glazed stoneware gully traps, square 150X150 mm size mouthed, type 'P' setting and jointing to drains with cement mortar 1:1 complete all as specified and directed. |
| 101 | Dismantling water tanks capacity exc. 250 litres and n.exc. 500 liters and removing to store complete all as specified and directed. |
| 102 | S&F rotational moulded polyethylene water storage tank, ISI marked, 500 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections complete all as specified in SSR Part-I and as directed. |
| 103 | S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 g m s) complete all as specified and directed |
| 104 | Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work.complete all as specified and directed. |
| 105 | M&L for RCC (Nominal Mix) Type B1, 1:2:4(using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. (Sand :- Dimapur)Note :- Reinforcement and form work required shall be measured and paid seperately. |
| 106 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 107 | Ditto as per items No 104.00 here-in-above but 5mm and over upto & incl 10mm dia in stirrups, spaces and binders complete all as specified and directed. |
| 108 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping), fair finished surface of concrete complete all as specified and directed. |
| 109 | M&L for 25mm thick PCC 1:3:6 type C-1 using (20mm graded crushed stone aggregate) as in roof covering finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 110 | Taking down existing unserviceable treatment of any description including cement plaster any thickness from roof surfaces, cleaning of roof surfaces and preparing it for further treatment and removing rubbish from the site up to distance 50 mtrs complete all as specified and directed |
| 111 | M & L for Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed. |
| 112 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application including Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 and also including cleaning of plaster roof surface and applying one coat of blown type [email protected] kg/sqm over cold bitumen [email protected] Ltr /sqm complete all as specified and completed. |
| 113 | M&L for applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical surfaces and floor of slab including cleaning of surfaces complete all as specified and directed. |
| 114 | M&L for one coat of Aluminium paint over APP based polymeric membrane or surfaces of any description , over 10 cm width or girth not otherwise described all as specified and directed. |
| 115 | M&L for rendering 10mm thick plaster in cement mortar (1:3) on fair faces of RCC chajja surfaces using water proofing compound @3% by weight of cement as per manufacture instruction and finished surface even and fair without using extra cement complete all as specified and directed. Note: (i) Plastering shall be carried out using Dimapur Sand (ii) WPC will be measured and paid separately |
| 116 | M&L for forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in cement mortar (1:4) in brick wall complete all as specified and directed. |
| 117 | Taking down carefully unserviceable aluminum/ copper point wiring (light/ fan/ socket/ power) complete including fixture & fitting such as switches, sockets, ceiling roses regulators, lamp holder etc. but excluding light fittings & fixture and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 118 | Taking down carefully unserviceable aluminum/ copper point wiring (light/ fan/ socket/ power) complete including fixture & fitting such as switches, sockets, ceiling roses regulators, lamp holder etc. but excluding light fittings & fixture and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender