Tender For Repairs To Joineries, Plumbing, Leakage, Seepage In Af Stn Kalaikunda
Tender Value
45 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
3 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medinipur West → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairs To Joineries, Plumbing, Leakage, Seepage In Af Stn Kalaikunda
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame of any description with shutters (without taking off shutter from the frame) not exc 1.5Sqm each and removing from the site complete all as specified and as directed. |
| 2 | As per item No 01.00, above but exc 1.5 Sqm and not exc 4 Sqm |
| 3 | S&F 105X60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, holdfast etc., complete all as specified and as directed. |
| 4 | S&F 125X60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, holdfast etc., complete all as specified and as directed. |
| 5 | S&F 2nd class 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated.(Factory made) |
| 6 | S&F 2nd class 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats (Factory made). |
| 7 | S&F factory made solid panelmoulded prelaminated both side prelam pvc sheet used insted of plain colour pvc sheet,stiles nad rails feathered at edge, PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc complete. |
| 8 | S&F factory made solid PVC door frame,single side pvc sheet used instead of plain color pvc sheet and edges will be printed to match with prinyed sheet of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specifed and as directed |
| 9 | Taking down aluminium Chowkhats or frames not exc. 1.5 sq. m each without taking off shutter.Complete all as specified and as directed. |
| 10 | Taking down aluminium Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each without taking off shutter .Complete all as specified and as directed. |
| 11 | Resecuring or easining & adjusting without taking down shutter of any description of wooden joinery not exceeding 1 Sqm each |
| 12 | As per Item No 11.00 above, but Exceeding 1 Sqm n.exc 2 Sqm each |
| 13 | As per Item No 11.00 above, but Exceeding 2 Sqm each |
| 14 | M&L PCC 1:3:6 type C-0 using 12.5 mm graded agg as in back filling of pressed steel frame complete. |
| 15 | S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed. |
| 16 | S&F aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and as directed. |
| 17 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts extruded sections or cast alumiium alloy 300 mm long complete all as specified and as directed. |
| 18 | S&F butt hinges medium weight cold rolled mild steel 100mm size complete all as specified and as directed. |
| 19 | S&F butt hinges medium weight cold rolled mild steel 75mm size complete all as specified and as directed. |
| 20 | S&F 300mm long mild steel ordinary quality rat rail rod pattern spring including roller plate complete fixed to steel surfaces including necessary welding complete all as specified and directed. |
| 21 | S&F aluminum extruded aluminium alloy handles (fabricated type) anodised of 150mm complete all as specified and as directed. |
| 22 | M&L second class hard wood plain filllets square rectangular or triangular in section clean sawn secured with nailsn. exc 6 Sqcm fixed & repair complete all as specified and as directed. |
| 23 | S&F in repair 18 mm thick prelaminated High Density HDHMR Both side decorative type in cup board of any size fixed with screw and necessary fittings complete all as specified and directed. |
| 24 | S&F 100 mm mild steel pressed handles, oval type, stove enamelled black Complete all as specified and as directed. |
| 25 | S&F stainless steel self closing of make Hettich sensys hinges complete as OEM specfiction sensys 8645I (thickness 24mm) 16 crank complete set complete all as speecified and directed. (Make:Hettich) |
| 26 | S&F push to open magnetic catches with 2-10 kg holding force of Make Hettich complete as OEM specfiction |
| 27 | Preparation of new wood surfaces of any description and applying two coats of synthetic enamel paint over a coat of pink primer Complete all as specified and as directed. |
| 28 | S&F in repair 18 mm thick prelaminated MDF board Both side decorative type in cup board of any size fixed with screw and necessary fittings complete all as specified and directed. |
| 29 | S&F Mild Steel windows or ventilators, fixed type, with glazing bars dovetailed or welded complete all as specified and directed. |
| 30 | S&F Mild steel window Any type of section with side hung shutters including projecting type hinges with steel handle and steel pag stay complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 31 | S&F Mild steel window Any type of section with side hung shutters including projecting type hinges with steel handle and steel pag stay complete without glazing bars, dovetailed or welded complete all as specified and directed. |
| 32 | S&F steel ventilater with top hung shutter including hinges and mild steel peg stay Complete all as specified and as directed. |
| 33 | S&F 2nd class Wooden Piece in chowkath incl taking down broken portion and fixing by new wooden piece of chowkath as per required existing size complete all as specified and as directed |
| 34 | Filling Masala in chowkhat burad with glue or fevical and make good complete all as specified and as directed |
| 35 | Dismantling structural steel work including doors, gates,guard bars but excluding framed trusses etc. |
| 36 | M&L framed work as in door or gates of angle or other section complete drilled for fixing of steel sheeting or other covering etc to be prepared for hanging with and including hooks or hinges and hanging also fastening and fixing complete. |
| 37 | S&F mild steel plain black sheet 1.00 mm thick as in covering to doors shutters etc cut to size edges beaded holes punched, including rounded scraws or rivets and fixed to wooden steel member etc with plain 40 mm lap joints or weld / reavated inlcluding |
| 38 | M&L welding in repairs n.exe 2.5 cm in length on metals to be welded n.exc. 6 mm thick each. |
| 39 | M&L preparation or new steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 40 | S&F in repair 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty and pins in square n exc 0.5 sq. m in each pane on wooden / steel joinery including hacking out complete all as specified and as directed. |
| 41 | S&F in repair 3 mm thick figured Sheet glass pin headed type and glazing with oil putty and pins in square n exc 0.5 sq. m in each pane on wooden / steel joinery hacking out complete all as specified and as directed |
| 42 | M&L Securing glass of any description in existing wooden/steel frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured) |
| 43 | S&F 20mm dia and 1mm thick curtain rod fancy type with wooden polished bracket etc complete as in repair. |
| 44 | S&F in repair stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples including fixing with new nut bolt and refix old flat iron over wiremesh. |
| 45 | S&F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples including fixing with new nut bolt and refix old flat iron over wiremesh. |
| 46 | Taking down Aluminium door shutters any size and refixing in the same opening including making petty repairs as required like cleaning and repair / replacement of beadings, glazing clips, rubber gasket, stoppers, adjusting tower bolts, locks, hydraulic door closer, hinges etc and make smooth functioning with entire satisfaction of Engr-in-Charge complete all as specified and as directed. Note: Replaced of any item shall be paid and measured seperately as Supply & Fix. |
| 47 | Taking down Aluminium window shutters any size and refixing in the same opening including making petty repairs as required incl cleaning and repair/replacement of beadings, glazing clips, stoppers, rubber beading, locks, stays, hinges etc and make smooth functioning with entire satisfaction of Engr-in-Charge complete all as specified and as directed Note: Replaced of any item shall be paid and measured seperately as Supply & Fix. |
| 48 | S&F powder coated aluminium window & ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.) hinge type B-21 100mm long (2 No.) suitable handle (1 No.) omplete all as specified and as directed |
| 49 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed |
| 50 | S&F Powder coated aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed |
| 51 | S&F factory-made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) up to 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of UPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but noextra payment on this account shall be made. |
| 52 | S&F Sheet glass 4.8 mm thick, ordinary quality & glazing with oil putty in square but n.exc 0.5 sq.m in each pane.complete all as specified and directed. |
| 53 | S&F 12mm thickToughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required,complete all as specifed and as directed. |
| 54 | M&L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed. |
| 55 | M&L 35mm thick Moulded PVC door fabricated with reinforcement of welded 19mmX19mm square M.S tube of 19 gauge with infill with solid core profile pasted with 4.5mm thick moulded prelam pvc sheet on both side with solvent cement and cynoacrylate Adhesive incl pvc moulded frame of size 105mmX60mm.Complete all as specified and as directed.(Make: Rajshri plastiwood ,pattern: Eliptical Galaxy/Blue sky ) |
| 56 | S&F in repairs Door seal (Snake guard) with Aluminium frame powder coated suitable for 900 to 1000mm door opening incl fixing to door with welding/ screw complete all as specified and as directed |
| 57 | Dismantling floor,hearth or wall tilling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 58 | M&L Glazed ceramic coloured tiles 300 × 200 x 7 mm thick or 450 x 300 x 7mm (coloured) on vertical surfaces such as dado skirting and rise to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over & incl. 15mm screed in CM1:6 complete all as specified and as directed |
| 59 | M&L Non - skid Ceramic joint free coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl. 15mm screed in CM1:6 complete all as specified and as directed |
| 60 | M&L Non - skid Ceramic joint free coloured tiles 8-9 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl. 15mm screed in CM1:6 complete all as specified and as directed. |
| 61 | M&L Endura tiles 9-10 mm thick of size 300 X 300 mm in floor including 15 mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 62 | M&L Polished Glazed Vitrified tiles light shade 9-10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. including 15mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 63 | Dismantling of stone slabs and tiles of any description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar . |
| 64 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite |
| 65 | Demolition of brickwork or stone/ boulders masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc. but not excluding ashlar facing dressed stone work and precast concrete articles. |
| 66 | M&L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 67 | M&L Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and as directed. |
| 68 | Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed. |
| 69 | M&L rendering 15 mm thick in cement mortar (1:4) on other than fair faces of brick or concrete surfaces (5mm thick CM 1:4 with WPC setting coat and 10mm thick CM 1:4 backing coat), finished even & fair without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note :- WPC measured and paid separetely. |
| 70 | Supply only integral water proofing compound. |
| 71 | M&L rendering 5 mm thick cement plaster in cm 1:3 on ceiling including finished even and smooth without using extra cement complete all as specified and as directed. |
| 72 | M&L rendering 10 mm thick cement plaster in cm 1:6 on fair faces brick or concrete surfaces of wall including finished even and smooth without using extra cement complete all as specified and as directed. |
| 73 | M&L preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed. |
| 74 | M&L preparation of new plastered surfaces applying two coats of oil bound distemper over a coat of primer on walls complete all as specified and as directed. |
| 75 | M&L applying two coats cement base paint on wall including preparing new plastered surface over alkali resistant primer. |
| 76 | Demolition of unreinforced cement concrete ground floors and pavings n.exc. 15 cm thickness (below or above ground level) unreinforced. |
| 77 | M&L cement concrete type B-1 (1:2:4) (20 mm graded stone aggregate) 40 mm thick as in floor finished even and smooth w/o using extra complete all as specified and as directed. |
| 78 | M&L Cement concrete 1:3:6 type C-2 using 40 mm graded stone agg. as in sub floors/floors, fdn and mass filling complete all as specified and as directed |
| 79 | M&L Cement concrete type C-2, 1:3:6 (40mm graded aggregate) 100 mm thick as in bedding layer Finishing cement concrete complete all as specified and as directed |
| 80 | M&L Disconnecting existing water tanks setting a side for repairs, cleaning of service for PVC tank by rubbing vertical wall and buttom of with bleaching powder and allowed 1/2 hour to react then washing down with water to get free from deposits and bleaching inside the tank of capacity and mouth of circulating pipes and hoisting, reconnecting, and refixing in position duly marked the date of cleaning, capacity exc. 300 and not exc. 500 Ltrs complete all as specified & as directed. |
| 81 | M&L Disconnecting existing water tanks setting a side for repairs, cleaning of service for PVC tank by rubbing vertical wall and buttom of with bleaching powder and allowed 1/2 hour to react then washing down with water to get free from deposits and bleaching inside the tank of capacity and mouth of circulating pipes and hoisting, reconnecting, and refixing in position capacity duly marked the date of cleaning exc. 500 and not exc. 1000 Ltrs complete all as specified & as directed. |
| 82 | S&F in repair for door closer Aluminium extruded section Hydraulically regulated designation No.3 universal type suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg complete all as specified and as dierected. |
| 83 | S&F in repair Double action floor springs hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main of brass with stainless steel cover governing pivot made of brass other parts made of MS heavy duty complete all as specified and as directed. |
| 84 | S&F Brass 4-levers Mortice lock, vertical type, size 100mm complete all as specified and as directed. |
| 85 | S&F in repairs Floor door stopper of Brass body and tongue. anodized with hard drawn steel spring fixed in floor (length of cover plate 150 mm) |
| 86 | S&F in repairs corner glass shelves 225mm fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 87 | S&F in repairs ss two way bib cock 15mm with single knob and wall flange complete all as specified and directed. |
| 88 | S&F in repairs two way angle cock 15mm with single knob and wall flange complete all as specified and directed. |
| 89 | S&F stainless steel kitchen plate rack made of 1.00 mm thick sheet of size 24\\"x24\\" and 36''X 36'' incl shelves, rod to put plates etc and fixed to wall complete all as specified and as directed. |
| 90 | S&F in repair stainless steel soap dish, any type fixed to plugs chromium plated brass screws complete all as specified and as directed. |
| 91 | S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm dia complete all as specified and as directed. |
| 92 | S&F in repairs towel Ring round with round flange of brass chromium plated including brackets. complete all as specified and as directed. Make:Cera or equivalent. |
| 93 | S&F in repairs kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410 mmx330mmx 160mm etc complete all as specified and as directed. |
| 94 | S&F in repairs kitchen sinks without drainage board made of stainless stell 1mm thick kitchen or laboratory with plugs, washers and wastes, coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160mm etc complete all as specified and as directed. |
| 95 | M&L repair of sunken slab as in Preparing surface of sunken slab of any type of WC by demolation of PCC from sunken portion, taking down of old water proofing and applying 15 mm thick cement plaster (1:4) with integral water proofing compound both on floor and on wall incl laying APP based polymeric membrane of minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric over a layer of hot blown bitumen.The sunken shall be filled with PCC of 1:4:8 as per existing thickness incl GI, a pipe of dia 40mm and 600mm long (GI spout) to be laid on floor complete as specified and as directed. |
| 96 | M&L ATT treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and as directed |
| 97 | M&L ATT treatment along the external wall below concrete or masonry aron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. |
| 98 | M&L ATT treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed |
| 99 | S&F 20mm dia 3-layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc incl cutting Grove and takingout pipe& fixing in repair upto (G+3) storied building. |
| 100 | As per item No 99.00, above but 25 mm dia |
| 101 | M&L repairing of leakage in Concealed type PP-R pipe and Making connection to distribution branch with PP-R main of outer dia 16-40 mm by providing and fixing tee, bend, socket etc including cutting and making fusion joint etc incl cutting Grove and taking out pipe & fixing in repair upto (G+3) storied building. (Repair Incl Cutting of tiles / wall and making it good after repair of leakage) |
| 102 | M&L 75 mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded aggregate as in sub base of floor complete all as specified and as directed |
| 103 | M&L with grey cement and pigment Cement concrete tiles 30 cm x 30cm x 25mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors,and cut and polised including screed bed 15 mm thick in cm 1:6 complete all as specified and as directed |
| 104 | M&L, 60 mm thick M-35 Grade , machine pressed precast concrete interlocking paver block with grey cement and pigment , of approved shape and size confirming to IS 15658-2006, laid dry over 50mm thick sand cushion including demolition of existing pcc/ paver block complete all as specified and as directed. Note:-Sand cushion will be measured and paid seperately. |
| 105 | M&L sand filling under interlocking tiles or in foundation including watering and consolidation complete all as specified and as directed. |
| 106 | M&L providing Precast kerb stone in cement concrete 1:2:4 type B-1 (uing 20 mm stone aggregate) including necessary formwork complete all as specified and as directed by Engineer-in-Charge. |
| 107 | M&L Applying water proofing treatment on DAMP effected wall surface using approved make Acrilic Polymer modified 2 component cementious coating (Asian paints Smart Care Damp Block 2 K) over prepared surface including surface cleaning, removel of losses plaster/ putty curing compound as the manufacturer instructions complete all as specified & as directed by Engr-In- ChargeApplication shall be done on damp surface as follow:(i) Removing of existing cement mortar/cement plaster(ii) Application of ASIAN PAINTS SMART CARE DAMP BLOCK 2K on brick/concrete surface in Two coat(iii) Rendering of Surface ,10mm thick with Cement mortar 1:6 and making it smooth surface without any extra cement(iv) Apply of OBD with 1mm thick wall care putty and making the good and smooth |
| 108 | M&L acrylic polymer modified cementitious liquid applied water proofing coating system (SikaTop®-107 Seal IN )(Part-A Acrylic polymer, Part-B Portland cement with selected aggregates and additivesas, Part-A : Part-B = 1 : 4 (by weight) ) in damp proof treatment applied in two coat, incl Sika sealant like Sika Swell® S-2 or Sikagard® 694 F(I) epoxy putty to prevent any leakage from the periphery complete all as per directed by Engineer in Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender