Request For Proposal For Supply Installation Testing And Commissioning Of Water Bodies Fountains Speaker Systems And Lighting Systems In 2 Parks With 3 Years Of Operation And Maintenance At Lucknow.
Tender Value
2.54 Crore
Estimated cost
Bid Submission
12 Nov 2026
0 days left
EMD
7.62 Lakhs
Bank guarantee accepted
Document Fee
4366
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Request For Proposal For Supply Installation Testing And Commissioning Of Water Bodies Fountains Speaker Systems And Lighting Systems In 2 Parks With 3 Years Of Operation And Maintenance At Lucknow.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead., Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 3 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
| 4 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of WC. kitchen and the like consisting of 1) Ist course of applying cement slurry 4, 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface) IInd course of 20mm cement plaster 13 (1 cement 3 coarse sand) maxed with water proofing compound in recommended proportion mcluding rounding off junction of vertical and horizontal surface IIIrd course of applying blown or residual bitumen applied hot at 17 Kg per sqm of area iv) IVth course of 400 micron thick PVC sheet (Overlaps at jomts of PVC sheet should be 100 mm wide and pasted to cach other with bitumen 17 Kg/sqm) |
| 5 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces:, Two coats |
| 6 | Providing and LayingCeramic glazed floor tiles of size 300x300mmthickness tobespecifiedbythemanufactureer, of 1stqualityconformingtoIS:15622,ofapprovedmake, in all colours, shade, like swimmingpool pattern tile laidon 20mmthickbedof cementmortar 1:4 (1cement:4coarse sand), Jointing with grey cement slurry@ 3.3kgsq.m includingpointingthejointswithwhitecementandmatching pigments etc, completeand forwall application tiles tobe fixedonthewallsurfacewiththehelpofapprovedadhesive applied a the rate of 2.5 kg per sqm and grouting of the same |
| 7 | Constructing Sump 120x120x60 cmwith bricks of class designation75 incementmortar 1:4 (1cement : 4coarse sand) including CI cover with frame LIGHTWEIGHT complete as per design. With FPS bricks |
| 8 | \\"SITC of INSIDE DROP RINGS WITH CALYX AERATING SPRAY for existing waterbody of size 15.72m X 6.45m:\\" Spray comprises of a Calyx Aerating in center flanked with an Inside Drop Ring on either side. Each Inside Drop Ring comprises of a 3m dia ring with 36 nos. heavy jet nozzles forming a white foaming dome. Nozzles on ball joints to adjust 10 degree off vertical. Nozzles are made of Brass- Chrome plated. Manifold/Pipework are made from Galvanised steel, B-class, make Jindal, ISI Mark with necessary accessories like flanges, sockets, stands etc. made of steel- galvanized . High quality rubber gaskets, nuts & bolts along with gunmetal control valves to adjust flow pressure. Approx. height of water effects: 3m. Make of spray:Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR) |
| 9 | SITCofFountaincomprisingof12nos.FoamJetsfittedona 100mmNBGalvanised Steel Pipe (8mtr.X2 lengths)Jindalmake\\"B\\"ClassISIMarkwithaccessorieslikeflanges, sockets, pipe stands etc. made of steel- galvanized & Waterfall/Cascading.EachFoamJetNozzleof25mmorifice sizemadeofBrass-Chromeplated fittedwith25mmBrass BJRCfordirectionaladjustments,25mmgunmetal ISImark wheel valve (Sant/Zoloto make ISI Mark) & necessary Galvanised steel fittings. Waterfall/Cascading from lips approx. 9m wide at top level to lowest level. Manifold/Pipework/deflectoraremadefromGalvanisedsteel Pipe, Jindalmake\\"B\\"Class ISIMarkwithaccessories like flanges, sockets, pipe standsetc.madeof steel-galvanized (Pipesize-100mmNB,Length50mtr.).32mmgunmetalISI mark wheel valves (Sant/Zoloto make ISI Mark) with necessaryGalvanisedsteelfittings.4\\"GateValve&4\\"NRV of C.l, on each pumpset delivery (Sant/Zolotomake ISI Mark).Approx, height ofwater displays/effects: FoamJet1.5m.AllGalvanisedSteelandMildSteelmaterialsshallbe hotdipgalvanisedinfactoryafterdoingnecessaryfabrication work.MakeofPremierWorld/A.M. IrrigationSystem/Wet Design |
| 10 | SITC of Monoblock type submersible pump set of Following Capacity (Three phase, 50Hz, 415-380V AC) proper completion of work as per direction of E/Ic. Kirloskar/Crompton Greaves/KSB/Texmo. Suction filter for pump: Filter body & filter mesh made from AISI 304 standard stainless steel. 10 HP |
| 11 | SITC of Monoblock type submersible pump set of Following Capacity (Three phase, 50Hz, 415-380V AC) proper completion of work as per direction of E/Ic. Kirloskar/Crompton Greaves/KSB/Texmo. Suction filter for pump: Filter body & filter mesh made from AISI 304 standard stainless steel. 5.0 HP |
| 12 | SITC of LED light RGB, 36 W, 24 v DC, SS construction. Output: RGB and white. Body, top ring, mounting bracket. Fasteners: stainless steel AISI 304 Gland: Polymide Gasket: Elastomer Glass: Toughened Adjustable angle mounting bracket Professional grade electronic components Rating As per IP68 tested from a Govt of India Test Laboratory. (make: premierworld/water works/wet design) |
| 13 | SITC of Solenoid valves (electromechanically operated valve that controls the flow of fluids (liquids or gases) in a system using an electric current to activate it. ) with 24 V DC coil (make: premierworld/water works/wet design)Proper Completion of work as per direction of E/Ic. |
| 14 | Solenoid valve panel: 1 Sol valve panel made of 2mm thick sheet steel enclosure, foot mounted type, epoxy powder coated (Siemen’s grey). Front doors are hingeable & lockable with the body. 2) Degree of protection – IP 54. 3) All cable entry from bottom. 4) All doors and gland plates have spongy rubber gasket. 5) Panel should have the main incoming feeder, bus bar chamber, instrument and component chamber and transformer chamber. a) Main incoming chamber consist of one number rated TP MCCB or MCB, ( make: MDS / Schneider/ L&T / Siemens / GE / Equivalent ). b) Bus bar Chamber consisting of rated current aluminium bus, with heat sink. c) Instrument Chamber consisting of digital / analogue Ammeter & Voltmeter with selector switches and phase indication lamp and necessary rated SP MCB, make MDS/ GE/ Schneider for control circuit. d) Component chamber should have every channel protected by SP MCB, make – MDS / Siemens / Schneider/ L&T and every channel operated by the mini contactor (Make: Moeller / Schneider / GE) or PLA relay, 2 CO / 3 CO. Terminals (Elmex) are provided for every channel and necessary rated SP MCB, make MDS/ GE/ Schneider for control circuit. |
| 15 | SITC of GM Gate valves and NRV (essential components in fluid and gas control systems.) .Proper Completion of work as per direction of E/Ic. |
| 16 | SITC of Tentative cables for pumps, lights and sol valve (With respect to control room location shown in drawing) Makes :-Havells/Polycab/Gloster/equal 2.5 sqmm 3.0 core |
| 17 | SITC of Tentative cables for pumps, lights and sol valve (With respect to control room location shown in drawing) Makes :-Havells/Polycab/Gloster/equal 1.5 sqmm 4.0 core |
| 18 | Suplly and burring of safe Earthing Electrode T-39 Cu Copper Coated, Length 2000mm, outer pipe 76.3mm X 3.2 inner pipe 42.4mm X 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50kgs activated soil (BFC) capable of reucing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame withhinged cover & mansonry housing.(From electrode terminal to switch board, cost of 25x3 copper strip will be extra) Make: As approved in U.P.P.W.D & C.P.R.I. all respects. |
| 19 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 20 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 21 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 22 | SITC of Programmed music: Programmed music of duration 15 minutes .Proper Completion of work as per direction of E/Ic. |
| 23 | Fillteration system :- Supply, Installation, Testing & Commissioning of Devyami Ultra-Slim Pipe-less Water Body Filtration Unit suitable for decorative water bodies, reflecting pools, koi ponds, fountains, lotus ponds and plunge pools. Unit shall be manufactured from Marine Grade SS316 and incorporate integrated skimmer, 10-inch (20 micron) bag filter, 0.4 HP low-voltage filtration pump, 18 W underwater LED light, vacuum point, sensors and Smart IoT controller in a single compact housing (Ø110 mm x 850 mm). Filtration capacity: 5 m³/hr. Complete with all accessories required for satisfactory operation. |
| 24 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). |
| 25 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level., P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping & hooks. DSR 20235.22A.6 |
| 26 | 12 mm cement plaster of mix :, 1:6 (1 cement: 6 coarse sand) |
| 27 | Supply, Installation, Testing and Commissioning of Luminaries comprise of 12V LED lights (RGB). Complete light body made of Stainless steel 304 grade, total 27 watt power leds. Toughened glass with seal Stainless steel 304 grade cable gland. All external nuts and bolts are of Stainless steel 304 grade. Adjustable mounting bracket is made of Stainless steel 304 grade. IP 68 compliant. All 'in pool' connections shall be fully waterproof. Make of Luminaries Make: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharatengineers.(LMR) (PSR ITEAM AYURVEDA PARK) |
| 28 | \\"Supply, Installation, Testing and commissioning of specialised Outdoor type Electric panel for fountain which include control arrangement for fountain's pumpset and RGB Sequencing lights comprises of: 1. Contactor 25 Amp- 03 Nos (Make: L&T/ Schneider/ Siemens/ GE) 2. Star Delta Timer - 01 Nos (Make: L&T/ Schneider/ Siemens/ GE) 3. Single Phase Preventer- 01 Nos (Make: Bentex/ Selec/ GIC or equivalent) 4. Incomer Main Switch 40 Amp- 01 Nos (Make: L&T/ Schneider/ Siemens/ GE) 5. Overload Relay 12- 30 Amp- 01 Nos (Make: L&T/ Schneider/ ABB/ BCH or equivalent) 6. Fuse for motor 32 Amp- 03 Nos (Make: GE/ L&T or equivalent) 7. MCB for Lights 6 Amp -01 Nos (Plaza/ Anchor/ ABB/ Havells/ Legrand or equivalent) 8. Push Button On/ Off switches (Red/ Green)- 02 Nos. 9. Overload Indicator - 01 Nos (Make: Eaton/ Siemen or equivalent) 10. Single Phase Indicator- 01 Nos (Make: Eaton/ Siemen or equivalent) 11. 3 Phase indicator RGB- 01 Nos (Make: Eaton/ Siemen or equivalent) 12. Voltmeter- 01 Nos. (Make: Motwane, Innova, Fluke or equivalent) 13. Ampere Meter- 01 Nos (Make: Motwane, Innova, Fluke or equivalent) 14. SMPS/ Transformer for lights- 01 Nos (Make: Meanwell/ Pheonix/ Omron or equivalent) 15. RGB Lights' controller- 01 Nos. (Make: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers) 16. Internal Wiring steel sheet 16 gauge paint finish enclosure with hinged front door with provision for incoming & outgoing cable entry. Outgoing ampere 20, size of panel - 4ft X 3ft X 1ft depth. Make of electric panel: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers.( LMR)\\" |
| 29 | 1.1 kV grade double insulated copper flexible cable 2.5 sq.mm x 3 core for pumps, Make: Finolex/Havells/Polycab/Rellison PSR (J.M.P) |
| 30 | 1.1 kV grade double insulated copper flexible cable 1.5 sq.mm x 4 core for pumps, Make: Finolex/Havells/Polycab/Rellison PSR (J.M.P) |
| 31 | \\"SITC of Waterfall/Cascading situated at waterbodies of size 7.39m X 9.048m & 6.42m x 6.61m:\\" Waterfall/Cascading from lips approx. 1.5m wide at top level to lowest level. Manifold/Pipework/deflector are made from Galvanised steel, B-class, make Jindal, ISI Mark with necessary accessories like flanges, sockets, stands etc. made of steel- galvanized. High quality rubber gaskets, nuts & bolts along with gunmetal/C.I. control valve to adjust flow pressure. Make of waterfall: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR) |
| 32 | SITC of Single Oscillating Jet (a specific type of fluid jet that oscillates (or vibrates) to create a pulsating flow pattern. This concept is used in various applications, including fluid dynamics, mechanical engineering, and industrial processes.).Proper Completion of work as per direction of E/Ic. |
| 33 | \\"SITC of FOAM JETS WITH CALYX AERATING SPRAY for existing 2 nos. waterbodies of size 7.39m X 9.048m & 6.42m x 6.61m:\\" Spray comprises of a Calyx Aerating in center flanked with Foam Jets on 4 corners of waterbody. Manifold/Pipework are made from Galvanised steel, B-class, make Jindal, ISI Mark with necessary accessories like flanges, sockets, stands etc. made of steel- galvanized. High quality rubber gaskets, nuts & bolts along with gunmetal control valves to adjust flow pressure. Make of spray: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR) |
| 34 | SITC of Peripheral Inside Drop Ring ( a component used within plumbing, drainage, or fluid management systems.) , 1.16 m diameter, made of extruded aluminium pipe, each having 24 numbers chromium plated, brass, aluminium alloy nozzles.Proper Completion of work as per direction of E/Ic.. |
| 35 | \\"Supply installation testing and commisioning of weatherised Two-Way 5.25 inch (135mm) Coaxial Speaker with Components: • 5¼” highly weather-resistant driver • ¾” soft-dome highly weather-resistant tweeter and can handle 80W Pink Noise Power Handling (160W program) in direct 8Ώ setting, plus built-in 30W 70V/100V multi-tap transformer, should have Fully isolated center chamber for wiring protection, Frequency Response (-10 dB): 55 Hz - 18 kHz; (±3 dB): 65Hz - 16 kHz; Power Rating1: 160 W continuous Program (2 hrs), 80 W (320W peak), Continuous Pink Noise (2 hrs), 45 W (180W peak) Continuous Pink Noise (100 hrs), Maximum Input Voltage: 23.3 V, Sensitivity2: 86 dB, 1W @ 1m (ave. 80Hz - 16kHz), Nominal Coverage Angle: 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground), Directivity Index (DI): 3.4 dB, Maximum SPL 3: 105 dB @ 1m, Low Frequency Driver: 135 mm (5.25 in) diameter LF driver, Kapton™ former, 35.5mm (1.4 in) voice coil, polypropylene cone and polyurethane surround, High Frequency: 19mm (0.75 in) diameter HF driver Polyetherimide (PEI) dome. Complete in all respects and as directed by engineer in charge. (JBL/Bose/TW Audio/L Aucostic)\\" |
| 36 | Supplying, installation Testing and Commissioning of 2C x 4 sq mm Copper Speaker Cable in PVC Conduit of specified make, complete with all accessories etc complete as as per the attached approved make list and with proper connections etc complete in all respect as directed by Engineer-in-charge.. |
| 37 | Supplying, installation Testing and Commissioningof 2 x 2.5 sq mm Copper Speaker Cable in PVCConduit of specified make, complete as per the attached approved make list and with proper connections etc complete in all respect as directed by Engineer-in-charge.. |
| 38 | Supply, Installation, testing and commissioning of Speaker cage made of SS Jali for theft protection. complete in all respect as directed by Engineer-in-charge.. |
| 39 | Supply, Installation, testing and commissioning of PoE Ethernet Controller with minimum 8 programmable button and Volume Control, dual-gang US Decora or dual-gang EU form factor, push/rotary encoder, encoder ring, with sleep functionality, support minimum 2 LCD screen having 64x128 pixels screen resolution, Configured within Audio Architect via drag-and-drop, power consumption 300mA max at 48VDC with VW-1 Rated. (JBL/Bose/TW Audio/L Aucostic) complete in all respect as directed by Engineer-in-charge.. |
| 40 | Supply, Installation, Street Light (4.0 Mtr. Ht.) |
| 41 | Supply, Installation, Testing and Commissioning of 10 W LED Bollard Light with mounting base accessories having LED operating life >50000 burning hours, Input Voltage range of 160V-260V, LED chip make Cree, Citizen, Osram, Nichia. Working temperature -10deg - 60 deg C, colour temprature should be 3000K/4000K/6000K, Good Thermal management System with inbuilt drivers. Corrosion resistant aluminum cast housing and Ingress Protection IP66. Size of the shall be Square 150mm x 150mm x 600mm Height (LBT/ALT/Tisva/DTS/Martin) |
| 42 | SITC of Analog input 4 channel amplifier, 300 W per output channel, on board digital signal processor, Crown CDI 4/300 .Proper Completion of work as per direction of E/Ic. |
| 43 | Supply & Laying of Aluminium PVC insulated 16 Sq. mm 4 Core armoured cable complete in all respect. |
| 44 | Supply,installation,testing and commissioning of 2core X 1.5 mm² copper wire in PVC conduit as per specifications (for transmission) |
| 45 | Supply and fixing of plain or pin type aluminium lug to the cable leeds included with tape etc complete in all respect |
| 46 | operation and maintenance for 1 st years (24700458.27 x 0.50) |
| 47 | operation and maitenance (24700458.27 x 1.00)= 247004.58 |
| 48 | operation and maintenance for third year (2470458.27 x 1.5%)= 370506.87 |
| 49 | G.I OCTAGONAL POLE Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foun |
| 50 | G.I OCTAGONAL POLE Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foun |
| 51 | STREET LIGHT LUMINAIRES Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect., CAT- AAA |
| 52 | Supply and fixing of M/S bracket (circular/square shape) for fixing of four number LED light on top of pole complete of work with labour T&P etc as E/i. |
| 53 | S/B of Earth rod 20 mm dia 2.5 mt long including Gl wire 7/16 SWG to connected earth rod and earth clamp on pole, 3 mtr long steel conduit to carry earth wire along the jpole complite as per approved of E/Ic. (PSR) |
| 54 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect., 40 A SPN |
| 55 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc., 10 sq. mm 4 core |
| 56 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc., 50 sq. mm 3-1/2 core |
| 57 | Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. (Incoming - 315 Amp TPN 1 No.), Outgoing -100 Amp. TPN-2 Nos.& 63 Amp. TPN-2 Nos., Cat. B. Cubicle Type |
| 58 | DOWN LIGHT LUMINAIRES Supply and fixing of recess/ Surface/ Pendent mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect., CAT- AAA |
| 59 | FLOOD LIGHT LUMINAIRES Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect., CAT-AA |
| 60 | PATH LIGHT & BOLLARD LUMINAIRES Supply and fixing of decorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection complete in all respect., CAT- AAA Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender