Tender For Providing And Fixing Grass Paver Block Work Plot No-22 To Plot No-22/1 And Expressway Service Road Sector Kp-2, Greater Noida.
Tender Value
1.29 Crore
Estimated cost
Bid Submission
13 Nov 2026
6 days left
EMD
2.59 Lakhs
Bank guarantee accepted
Document Fee
2480
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Fixing Grass Paver Block Work Plot No-22 To Plot No-22/1 And Expressway Service Road Sector Kp-2, Greater Noida.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineerin- charge. : All kinds of soil (DSR-2023/2.6.1) |
| 2 | Cartage of ballast, Kankar Coal, grit or sand including loading & unloading but excluding stackings on pakka roads: 2nd Km. (SOR-25/Ch-4/4.02/232(a)) |
| 3 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. (DSR-2023/16.1) |
| 4 | Granular sub-base with graded material, plant mix method Construction of granular sub-base by providing close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401. MORTH/4.01/401(A) |
| 5 | Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x70 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side, including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:3 (1 cement : 3 coarse sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-charge. (AR/GNIDA) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR-2023/4.1.3) |
| 7 | Supply of 80mm thick ISI marked Shaped machanically compressed Interlocking cement concerete paver blocks, smooth high laoss finish, skid resistant; manufactured from rubber moulds through vibrocompressiojn mechanism, high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping. The compressive strength of concerete paver block shall not be less than 30 MPa and weight 4.5kg per No. confirming to IS: 15658-2006. : Gray Base (SOR-2025/2.5(a)) |
| 8 | Laying of Interlocking Tiles of 60/80/100 mm thick including levelling and dressing of surface up to required level and slopes over 30 mm thick bed and filling joints with fine sand including cost of fine sand, labour, T&P etc complete But excluding cost of Tile as directed by Engineer in charge. (SOR-2025/5.5.07) |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR-2023/4.1.8) |
| 10 | Labour cess and GST will be paid extra as per Govt. orders. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender