Tender For Provision Of Multi Section Digital Axle Counter For Redundancy And Reliability Improvement In Complete Yard To Cater Water Logging At Khm Station Of Varanasi Division As Per Boq.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Nov 2026
9 days left
EMD
1.27 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Multi Section Digital Axle Counter For Redundancy And Reliability Improvement In Complete Yard To Cater Water Logging At Khm Station Of Varanasi Division As Per Boq.
BOQ
| Sl. No. | Item Description |
| 1 | Item 1 -Supply of 4 conducore disconnect terminal blocks as per RDSO/SPN/189/2004 ver.3.0 ot latest, Inspection-Consignee. |
| 2 | Item 2 - Supply of End and Intermediate Plate as per RDSO/SPN/189/2004 ver.3.0 or latest, Inspection-Consignee. |
| 3 | Item 3 - Supply of screwless End Stop as per RDSO/SPN/189/2004 ver.3.0 ot latest, Inspection-Consignee. |
| 4 | Item 4 -Supply of Steel carrier Rail as per RDSO/SPN/189/2004 ver.3.0 or latest, Inspection-Consignee. |
| 5 | Description:- Supply of PVC Wire 16x0.2 sq mm as per the technical specification attached, Inspection-Consignee. |
| 6 | Description:- Supply of GI Pipe 100 mm dia medium grade ISI mark Inspection :Consignee |
| 7 | Description:- Supply of GI Pipe 50 mm dia medium grade ISI mark Inspection :Consignee |
| 8 | Description:- Transportation of Materials Including Loading and unloading from consignee's store/ any station to other any station/ store. |
| 9 | Description:- Termination of signalling / Quad cable as per the technical specification attached. |
| 10 | Description:- Excavation of cable trench of 110 cm Depth and 30 cm Width in all kind of soils and its refilling with the same excavated soil consolidating by ramming to the level of 20 cm above the ground level over the trench as per the technical specification attached. |
| 11 | Description:- Excavation of cable trench of 100 cm Depth and 30 cm Width at level/track crossing and platform and its refilling with the same excavated soil consolidating by ramming to the level of 20 cm above the ground level over the trench as per the technical specification attached. |
| 12 | Description:- Horizontal direction drilling/boring without damage of surface road using Auger Machine. The bore shall be 150 mm dia & shall be done at the depth of minimum 1200 mm from the ground level. The ground level shall be considered ignoring the bank height of the bank of the road. The length of the bore shall be minimum 4 Mtrs long. this include insertion of different dia DWC pipe/ GI pipes coupling etc. as per direction of Engineer In charge. |
| 13 | Description:- EXCAVATION OF TRENCHLESS TRACK UNDER RAILWAY TRACK/BUSY ROAD ETCAT A DEPTH OF 1.20 METER BELOWGROUND LEVEL AND CULVERT/RIVER(INHDD ) AND LAYING OF 100 MM DIA GI PIPE/DWC PIPE(OF SIZE 90/76 MM OD/ID)IN IT (GI PIPE /DWC SHALL BE SUPPLIED BY THE RAILWAY) |
| 14 | Description:- Laying of 6 quad Cable in the trench as per cable route plan approved by railway as per the technical specification attached. |
| 15 | Description:- Laying of GI / HDPE/DWC Pipe for passing the cables at level /track crossing and platform etc. Only GI/HDPE pipe and socket will supplied by railway. Other activity will be done by contractor as per tech.specification. |
| 16 | Description:- Installation of Relay rack, Relays, Fuses etc and its wiring, nomenclature including Alteration in existing wiring etc at station or end location.Condensors, Resistances, Relay Rack , PVC wire ARA & wago terminals, Relays with bases and connectors shall be supplied by railway. All other materials require for the purpose shall be supplied by the contractor at his own cost as per Tech. specification. |
| 17 | Description:- Preparation of field diagram such as cable Route plan , Power supply lay out, Cable Termination Chart in relay room & Location Boxes, Location Wiring Diagrams, Fuse Analysis, Equipment Disposition Plan, Track Bounding & Insulation Plan as per Railway practice. Note: All the above Diagrams/Plans to be submitted in Polyster Film Tracing to the railway. The contractor shall also supply 6 sets of Photo/Ferro print copy of said plans/drawings out of which 1 set shall be duly laminated as per Tech. specification attached. |
| 18 | Description:- Preparation of Station Working Rule (SWR)Including Appendix- A, B, C, D, E, E, F and G in Hindi and English on Approved SIP/ ESP/ST/SWRD/ PD/VDU Layout etc. asper the Extant Practice being followed in Varanasi Division of N.E. Railway. The Contractor shall Supply Two Paper Print of the SWR as Draft for Approval and Comments. Once the Approval is Given he shall Supply Two Set Paper Prints of the SWR for Final Approval and Signature of the Concerned Officials On obtaining final Approval, The Contractor shall Supply 10 Sets of the SWR And 1 Set Gate Working Rule (GWR), if required, of each LC Gate (App.-A) Duly Photocopies of SWR. The Approved SWR shall be Finally Supplied in 2 Pen drives. |
| 19 | Description:- Preparation and Printing of Station Working Rule Diagram (SWRD) an Auto Cad based on Approved SIP, ESP etc. as per the extant Practice being followed in Varanasi Division of N.E. Railway. Contractor shall Supply One Print of SWRD (Paper Print Size as Required)as Draft for Approval and comments. Once the Approval is given, Contractor shall Supply Tracing of the SWRD on Good Quality Film Paper of Thickness not Less Than 75Micron for Signature of All Officials. On Approval the Contractor shall Supply 10Copies Blue Print of Tracing. The Approved SWRD shall be Finally Supplied in 2 Pen Drives. |
| 20 | Description:- Testing and Commissioning of complete yard both indoor and out door including break down testing w.r.t. selection table /locking table using simulation panel, finally from panel in presence of Railway official as per technical specification attached. |
| 21 | Description:- Cement concrete work for miscellaneous items in the ratio 1:3:6. Item includes excavation ,ramming, curing and plastering with cement sand mixture (aggregate not exceeding 3.8cm). Aggregate ,cement and to be supplied by contractor as per technical specification attached. |
| 22 | Description:- Providing Brick masonary in the ratio 1:6 cement &mortar including plastering with 1;4 cement and sand mixture both sides, 20 mm thick each with contractors own 2nd class brick , including excavation curing grouting bolting etc wherever required .Brick sand & cement to be supplied by the contractor as per technical specification attached. |
| 23 | Description:- Modification in wiring of already procured IPSs for provision of line wise pop-up supplies to the SSDACs in compliance to Railway board's Policy guidelines. |
| 24 | Description:- Installation and commissioning of Central Evaluator:- Installation , wiring, testing and commissioning of one Multi Section Digital Axle Counters Indoors Set comprising of processors/central evaluators for section/station/Relay Hut along with supply and installation of Maintenance free Earthing if required for processors/central evaluators including its associated indoor Equipment and wiring of the same to be integrated with existing EI/PI/Auto EI/Local Signalling circuits (one MSDAC set comprises of system fully wired and equipped for 10 DP and 8 TS as detailed . |
| 25 | Description:- Installation and commissioning of Detection point:- Installation and commissioning of Detection point installation of complete assembly of track device unit for entry or exit and track side electronic equipment along with supply and installation of Maintenance Free Earthing if required (as detailed with all materials for fixing the track devices, taking the cable lead through anti rodent, anti oxidant and non flammable propagating type DWC pipe as per IS 14930 Part I or II or latest from track device to location box/mushroom and terminating it terminals including digging of trench under track upto location/track side unit. (All materials required for installation of above equipment are to be supplied by the vendor). Note: Testing and Commissioning: Testing and commissioning of the supplied signalling equipment shall be carried out by CEL. Supply of Mushroom Boxes: For up to 60 Detection Points (DPs), the mushroom boxes shall be supplied by CEL to the designated Railway store. Transportation of the mushroom boxes from the Railway store to the installation site shall be the vendor's responsibility. Supply and Installation of MFE: Supply and installation of MFE shall be the vendor's responsibility. Additional Detection Points: If the total number of Detection Points exceeds 60 DPs, the supply of additional mushroom boxes and the supply and installation of MFE for the additional DPs shall be the vendor's responsibility. |
| 26 | Tools Kit for High frequency Digital Axle Counter Multi section. Portable operator console for onsite programming of Axle Counters as per technical requirement, inspection-Consignee. |
| 27 | SUPPLY AND INSTALLATION OF MAINTENANCE FREE EARTH AS PER RDSO SPECIFICATION NO.RDSO/SPN/197/2008 CONSISTING OF SINGLE EARTH PIT WHICH INCLUDES SUPPLY OF 35 sq. MM MULTISTRAND SINGLE CORE PVC INSULATED COPPER CABLEAS PER IS:694 FOR CONNECTING MAIN EARTH ELECTRODE TO MEBB IN THE EQUIPMENT ROOM INDUPLICATE AS PER MANUFACTURES RECOMMENDATION & AS PER RDSO SPECIFICATION ASFOLLOW :- (A) COPPER BRANDED STEEL ELECTRODE OF 3.0 METER LONG , 17 MMDIA WITH COPPER BONDING THICKNESS OF MINIMUM 250 MICRONS AND UL LISTED AND MARKED -1 NO. (B) EARTH ENHANCEMENT COMPOUND OF RDSO APPROVED BRAND SUPPLIEDIN SEALED BAG OF MIMIMUM10 KG-3 NO. (C) COPPER STRIP OF 150X25X6 MM TO TERMINATE EARTH ROD -1N0 (D) COPPER STRIP OF 300X25X6 MM (MEEB) -01 NO. (E) COPPER STRIP OF150X25X6 MM (MEEB) -1 N0.(F) DIGGING/AUGURING/BORINGOF SINGLE EARTH PIT OF100MM TO 125MM DIA TO THE DEPTH OF APPROXIMATE 2.8 METER . (G) INSERTION OF 3 METER ELECTRODE & PENETRATION IT AT LEAST 0.2 MTR. BY PUSHING GENTLY WITH SLEDGE HAMMER WHERE THE NATURAL SOIL IS ASSUMED.INSPECTION -RDSO Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender