Tender For special Repair To Bldg No 02 (Near Stn Hq) At Aec Trg College And Centre Pachmarhi
Tender Value
9.66 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
11 days left
EMD
19350
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No 02 (Near Stn Hq) At Aec Trg College And Centre Pachmarhi
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar or cement lime mortar complete all as sepecified and directed by Engineer-in-charge. |
| 2 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as sepecified and directed by Engineer-in-charge. |
| 3 | Demolition of PCC in ground floor & pavings (including floor tile) n.exc 15 cm thickness below or above GL, including removing excavated material exc 1.5 KM but n exc 5.0 KM distance and depositing where as directed, complete all as sepecified and directed by Engineer-in-charge. |
| 4 | M&L for non skid, coloured ceramic tiles 7-8 mm thick of approved colour (square/rectangular) area of each tiles exc 0.11 but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of coloured tiles over & includind 15 mm thick screed bed or bedding layer in CM (1:6) complete all as sepecified and directed by Engineer-in-charge. |
| 5 | M&L for glazed ceramic colored tiles 450x300 x 6-7mm thick coloured on vertical surfaces such as skirting/dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including rendering 10 mm thick in cement motar 1:4 on wall complete all as sepecified and directed by Engineer-in-charge. |
| 6 | M&L for double charged vitrified ceramic coloured tiles 10 mm thick, area of each tiles n. exc 0.36 sqm in floors, set and pointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick scarred bed in cement mortar 1:6 complete all as sepecified and directed by Engineer-in-charge. |
| 7 | M&L for double charged vitrified ceramic coloured tiles 10 mm thick, area of each tiles n. exc 0.36 sqm on vertical surfaces over and incld 10 mm thick rendering in CM 1:3 complete all as sepecified and directed by Engineer-in-charge. |
| 8 | M&L 25mm thick PCC 1:2:4 type B-I using 20 mm graded stone aggregates as in flooring finished even and fair complete all as sepecified and directed by Engineer-in-charge. |
| 9 | M&L Cement Concrete 1:3:6 (40mm graded aggregate), 75mm thick as laid in alternate bays, finishing Concrete Surfaces Even and Smooth without using Extra Cement, complete all as sepecified and directed by Engineer-in-charge. |
| 10 | M&L PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in coping/ benching surface channel including weathering, slightly rounded or chamfered angles and throating ccomplete all as sepecified and directed by Engineer-in-charge. |
| 11 | S&F in repair 25mm dia stainless steel curtain rod heavy duty (304 grade) with suitable brackets and heads etc ccomplete all as sepecified and directed by Engineer-in-charge. |
| 12 | Taking down cement plaster on brick or stone wall etc incl racking out joints hacking for key & scrubbing down with water etc. complete all as sepecified and directed by Engineer-in-charge. |
| 13 | M & L for rendering 10 mm thick on fair faces of brick wall finished fair & smooth in CM 1:6 complete all as sepecified and directed by Engineer-in-charge. |
| 14 | M & L for rendering 15 mm thick on other than fair faces of brick wall and finished fair & even in CM 1:4 complete all as sepecified and directed by Engineer-in-charge. |
| 15 | M & L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over 1mm thick wall care putty and one coat of primer, complete all as sepecified and directed by Engineer-in-charge. |
| 16 | M & L preparation of newly plastered surfaces of walls and applying two coats of exterior weather paint over one coat of primer, complete all as sepecified and directed by Engineer-in-charge. |
| 17 | M&L for brick work with sub class 'B' bricks old size, straight or curved on plan exc 6M mean radius built in CM 1:4 complete all as specified and directed by the Engineer-in-Charge. |
| 18 | Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as sepecified and directed by Engineer-in-charge. |
| 19 | Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as sepecified and directed by Engineer-in-charge. |
| 20 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. 15mm bore (dia), complete all as sepecified and directed by Engineer-in-charge. |
| 21 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. 20 mm bore (dia), complete all as sepecified and directed by Engineer-in-charge. |
| 22 | S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and High or low level fluslhing cistern (exclusive of brackets and connections to pipes and fixing of chain and pull, or lever, if any complete all as sepecified and directed by Engineer-in-charge. |
| 23 | S&F in repair of vitreous china wash down water closet pan floor mounted snow white with extened S trap 220mm with slim soft close seat cover complete all as specified. Cat Part No. Ceremony 5D of size 655 x 355 x 735 mm Cat No 51013207 or requivalent as approved by Engr-in-charge. |
| 24 | S & F in repair Vitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and cutting for and pinning in ends of brackets or errecting stand, complete all as sepecified and directed by Engineer-in-charge. |
| 25 | S&F plated health faucets (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as sepecified and directed by Engineer-in-charge. |
| 26 | S&F, in repairs vitreous china urinals half stall incld providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinals including fixing and provision of CP brass spreders complete all as sepecified and directed by Engineer-in-charge. |
| 27 | S & F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed quarter turn with water saving nozzle”, complete all as sepecified and directed by Engineer-in-charge. |
| 28 | S & F in repair Bib taps, 15 mm dia, cast copper alloy, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed quarter turn with water saving nozzle”, complete all as sepecified and directed by Engineer-in-charge. |
| 29 | S & F in repair, fancy type pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed quarter turn with water saving nozzle”, complete all as sepecified and directed by Engineer-in-charge. |
| 30 | S&F in repairs PVC connections 15mm size of PTMT of 450mm long. complete all as sepecified and directed by Engineer-in-charge. |
| 31 | S&F in repair stainless steel grating 100 mm dia with waste hole fixed in cement, complete all as sepecified and directed by Engineer-in-charge. |
| 32 | S&F Mirror 600x450mm, Beveled Edge, Selected quality Glass, mounted on 6mm thick AC Building Board or Commercial Plywood and fixed to Wooden Plugs with Chromium plated Brass Screws and Cup Washers and fixed-in-repairs, complete all as sepecified and directed by Engineer-in-charge. |
| 33 | S&F Brass Chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges and fixed-in-repairs, complete all as sepecified and directed by Engineer-in-charge. |
| 34 | S&F in repair CP soap dish with glass finish (Glossy) complete all as sepecified and directed by Engineer-in-charge. |
| 35 | Dismantling old sheets in roof covering of any type and size complete all as sepecified and directed by Engineer-in-charge. |
| 36 | Dismantling of timber scantling 40 Sqcm in section and over in any position (unframed) complete all as sepecified and directed by Engineer-in-charge. |
| 37 | S&F mild steel work as in Roof trusses, trussed purlines, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections)including distance pieces, cleats etc, conforming to Fe-290(Gde-E-165) complete all as sepecified and directed by Engineer-in-charge. |
| 38 | M&L for Pre-painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.63 mm thick (total coated thickness) of any colour having tensile strength 550 M pa minimum yield strength as in roof covering fixed using hot dip galvanized self drilling and self tapping screws neoprene and EPDM washers. (Note : minimum, yield strength 550 Mpa with hot dip alloy of 55% Aluminium, 43.5 %zinc, 1.5% Silicon and finished with resin coat on both surfaces) complete all as sepecified and directed by Engineer-in-charge. |
| 39 | M&L for Pre-painted galvalume alu. Zinc coating GI based But pain steel sheet as in ridges 0.63 mm thick (total coated thickness) of any colour having tensile strength 550 M pa minimum yield strength as in roof covering fixed using hot dip galvanized self drilling and self tapping screws neoprene and EPDM washers. (Note : minimum, yield strength 550 Mpa with hot dip alloy of 55% Aluminium, 43.5 %zinc, 1.5% Silicon and finished with resin coat on both surfaces) complete all as sepecified and directed by Engineer-in-charge. |
| 40 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each. Complete all as specified and directed by Engineer-in-Charge. |
| 41 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 and n.exc 4 Sqm each complete all as sepecified and directed by Engineer-in-charge. |
| 42 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as sepecified and directed by Engineer-in-charge. |
| 43 | S&F pressed steel frames for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including PCC for back filling of chowkhats etc, complete all as sepecified and directed by Engineer-in-charge. |
| 44 | S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both side and both faces covered with approved pattern with decorative coloured laminated (machine pressured) type 1 of 0.9mm thick and all ground side faces covered with 10mm thick first class HW liping duly polished complete all as sepecified and directed by Engineer-in-charge. |
| 45 | S & F factory made 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter , divided into squares with plain chamfered rounded, mitered and rebated sash bars complete all as sepecified and directed by Engineer-in-charge. |
| 46 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face with wood free solid PVC complete all as sepecified and directed by Engineer-in-charge. |
| 47 | S&F 125mm long SS butt hinges medium weight, complete all as sepecified and directed by Engineer-in-charge. |
| 48 | S&F 150 mm long stainless steel tower bolt fancy type round (dia 10 mm) etc all as specified and directed. Cat No. – TBR2150 or equivalent as approved by Engineer-in-Charge. |
| 49 | S&F 150 mm long stainless steel door handle fancy type etc all as specified and directed. Cat No. – DHC2150 or equivalent as approved by Engineer-in-Charge. |
| 50 | S&F 250 mm long stainless steel aldrops (round nuckle) 12mm dia sliding door bolts with hasp and staple Cat Part No. – SLD 1210, complete all as sepecified and directed by Engineer-in-charge. |
| 51 | S&F 100 mm long stainless steel door stopper fancy type etc all as specified and directed. Cat No. – DSB-MH4-AB 100mm/4” or equivalent as approved by Engineer-in-Charge. |
| 52 | Supply and fixing of steel door spring of size 200mm to wooden/steel frame by welding or screwing as which ever is appropriate for fixing in frame complete all as sepecified and directed by Engineer-in-charge. |
| 53 | M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50 mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm ( section No 20737)\\" with including and fixing rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including & fixing stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and including and fixing 5mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting ,cill and making good to disturbed portion complete all as sepecified and directed by Engineer-in-charge. |
| 54 | S&F aluminium powder coted ventilator louvers type frame top and bottom of size 31x42x1.60mm(sec no-20558) rectaular tube of size 40x20x2 mm (sec no-14019 and middle verticalof size 42x46.20x1.60mm sec(20560) and clip for fixing wiremesh and glass of size 19x17.30x0.90mm (sec no-19360)thick including and fixing stainless steel wire cloth 0.36mm niminal dia of wire and 1.40mm average width of aperature and fixed with stainless steel wire staples and supply and fixing 5mm thick louvers with blades of 100 mm heavy duty with neccessary rubber beading ,gasket etcincluding necessary plaster, painting ,cill and making good to disturbed portion complete all as sepecified and directed by Engineer-in-charge. |
| 55 | S&F colour powder coated aluminum grills with aluminum frame fixed with stainless steel screws in window/ventilator openings complete all as sepecified and directed by Engineer-in-charge. |
| 56 | S&F galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window, complete all as sepecified and directed by Engineer-in-charge. |
| 57 | Dismantling wall and ceiling board (fibre, plup, insulation, etc) or insulation boards/slabs/ blankets, any thickness complete all as sepecified and directed by Engineer-in-charge. |
| 58 | M&L 6mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws fixed in ceiling flat or sloping complete all as sepecified and directed by Engineer-in-charge. |
| 59 | M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sourrounding wall using nylon sleaves and screws at 450 mm centre to centre/intermidate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm c/c with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flanges of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips accross the intermediate channel at 457 centre to centre including hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasterners 12.5mm dia, 40mm long complete all as sepecified and directed by Engineer-in-charge. |
| 60 | M&L for Kota stone flooring 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white/coloured cement with admixture of pigment to match the shade of stone including cutting and polishing and chamfering or rounding of exposed edges as in cooking plate form/window cill (in Single piece)or other similar situations complete all as sepecified and directed by Engineer-in-charge. |
| 61 | S&F rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed top),double layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with all fittings such as dead plugs and checknuts etc. of 20 mm dia including dismantling of old PVC tank (Capacity 500- 1000 Litres) & removing to where directed complete all as specified and as directed by Engr-in-charge. |
| 62 | S&F ball / float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore (minimum weight 210 gms) complete all as sepecified and directed by Engineer-in-charge. |
| 63 | M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof padding concrete as in leveling course to maintain the true roof slope, roof kerb or mud stops rounded or chamfered in edges, coping etc, finish even & smooth without using extra cement, complete all as sepecified and directed by Engineer-in-charge. |
| 64 | M & L for providing cement concrete type C1 1:3:6 (20mm graded stone aggregate as in filling in hole fast blocks and like complete all as sepecified and directed by Engineer-in-charge. |
| 65 | S&F mild steel work as in small ariticles as band, strap, hold fast and smiliar articles, complete all as sepecified and directed by Engineer-in-charge. |
| 66 | M&L for two coat of synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not other wise described over 10 cm width or girth, complete all as sepecified and directed by Engineer-in-charge. |
| 67 | M&L for two coat of synthetic enamel paint over one coat of pink primer on new wood surface of any description not other wise described over 10 cm width or girth, complete all as sepecified and directed by Engineer-in-charge. |
| 68 | Taking down eves gutters and rain water pipe of any description with all fittings complete all as sepecified and directed by Engineer-in-charge. |
| 69 | S&F, PVC (SWR) pipes single socketed, in any length with rubber ring joints and jointed with adhesive and laid in floors/ trenches/walls (110 mm bore) etc, complete all as sepecified and directed by Engineer-in-charge. |
| 70 | S&F, PVC (SWR) pipes single socketed, in any length with rubber ring joints and jointed with adhesive and laid in floors/ trenches/walls (75 mm bore) etc, complete all as sepecified and directed by Engineer-in-charge. |
| 71 | S&F, 110 mm bore PVC (SWR) bends and fixed in position with adhesive, complete all as sepecified and directed by Engineer-in-charge. |
| 72 | S&F, 75 mm bore PVC (SWR) bends and fixed in position with adhesive, complete all as sepecified and directed by Engineer-in-charge. |
| 73 | S&F PVC (SWR) 75 mm bore floor trap plain with grating including joints with solvent complete all as sepecified and directed by Engineer-in-charge. |
| 74 | M&L for complete removal of existing treatment from old surfaces of walls including cornices and applying one coat of 1 mm thick putty including suitable primer to obtain the desired/ true surface of wall complete all as specified and directed by Engineer- in-charge. |
| 75 | M&L for two coats oil emulsion distemper on putty prepared surfaces / old decorated surfaces complete all as sepecified and directed by Engineer-in-charge. |
| 76 | M&L, for preparationof old plastered or unplastered surface of old surface shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of Damp proof exterior emulsion wall paint on bands/ facia of old decorated surfaces of wall and walls complete all as sepecified and directed by Engineer-in-charge.Note : Colour will be decided by Engr-in-Charge. |
| 77 | Demolition of reinforced cement concrete as cover slabs for manhole, septic tank and soak well etc (reinforcement cut as reqiured to faciliate demolition) complete all as sepecified and directed by Engineer-in-charge. |
| 78 | M&L for precast RCC 1:1.5:3 type A 1 as in cover slab for manhole/ drains etc with plane faces complete all as specified and directed by Engineer-in-Charge. |
| 79 | M&L TMT bars 10 mm dia cut to length bent to shape required including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as sepecified and directed by Engineer-in-charge. |
| 80 | Cutting into existing manhole for connecting new drains making good to pipe of dia 150mm and rendering and cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) incement concrete 1:2:4 type B-1 smooth finished and reforming benching as required, complete all as sepecified and directed by Engineer-in-charge. |
| 81 | Taking down copper /aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as sepecified and directed by Engineer-in-charge. |
| 82 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as sepecified and directed by Engineer-in-charge. |
| 83 | Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as sepecified and directed by Engineer-in-charge. |
| 84 | Taking down ceiling fan and fan regulator of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades, regulators, ceiling cables ends and deposit to MES store yard of AGE (I) Pachmarhi complete all as sepecified and directed by Engineer-in-charge. |
| 85 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster for One light point controlled by one, one way switch 5 Amps, complete all as sepecified and directed by Engineer-in-charge. |
| 86 | Description all as per serial item No 87.00 but for One fan point/ exhaust fan point controlled by one, one way switch 5A & regulator. |
| 87 | Description all as per serial item No 87.00 but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 88 | Description all as per serial item No 87.00 but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 89 | Description all as per item No 87.00 but using 2.5 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH cable of multistranded PVC insulated unsheathed as earth continuity conductor along with wiring and connecting to the common eath dolly, complete all as sepecified and directed by Engineer-in-charge. |
| 90 | S & F for ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as sepecified and directed by Engineer-in-charge. |
| 91 | S & F switch piano flush type, single pole, one way, and 5 Amp single complete all as sepecified and directed by Engineer-in-charge. |
| 92 | S & F for socket outlet 2 in 1,5 pin,5 Amp 230 volts complete all as sepecified and directed by Engineer-in-charge. |
| 93 | S & F for socket outlet 2 in 1,5 pin,5/15 Amp 230 volts complete all as sepecified and directed by Engineer-in-charge. |
| 94 | S & F for stepped type electronic fan regulator flush type complete all as sepecified and directed by Engineer-in-charge. |
| 95 | S & F for lamp holder, PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as sepecified and directed by Engineer-in-charge. |
| 96 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as sepecified and directed by Engineer-in-charge.Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 97 | S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as sepecified and directed by Engineer-in-charge. |
| 98 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as sepecified and directed by Engineer-in-charge. |
| 99 | S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as sepecified and directed by Engineer-in-charge. |
| 100 | S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as sepecified and directed by Engineer-in-charge. |
| 101 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as sepecified and directed by Engineer-in-charge. |
| 102 | S & F for Highly efficient LED Bulbs, 15 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap, complete all as sepecified and directed by Engineer-in-charge. |
| 103 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as sepecified and directed by Engineer-in-charge. |
| 104 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as sepecified and directed by Engineer-in-charge. |
| 105 | Excavation in trenches n.exc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/loose soil for laying of cables etc complete all as sepecified and directed by Engineer-in-charge. |
| 106 | Returing , filing in including spreading, leveling , watering and well ramming in layers n.exc 25 cm in soft / loose soil complete all as sepecified and directed by Engineer-in-charge. |
| 107 | Removing surplus excavated soil n. exc 50 mtr and depositing where direted at a level n.exc 1.5 mtr above the starting point complete all as sepecified and directed by Engineer-in-charge. |
| 108 | Material and labour for sand filing in treches with clean dry unwashed sand for cushioning of under ground cable in layers of 23cm thick (8 cm before laying the cable and 15 cm thick after laying the cable) including watering and consolidation complete all as sepecified and directed by Engineer-in-charge.Note : Punnned thickness of sand will be measured. |
| 109 | supply and fixing of sub class B bricks laid flat adjacent to each other perpendicular to the direction of U/G cable complete all as sepecified and directed by Engineer-in-charge. |
| 110 | Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16sqmm 3.5 core, complete all as sepecified and directed by Engineer-in-charge. |
| 111 | Labour only for refixing the ceilling fan obtained serial item No 84.00 above the replacement of umsv 3 core PVC insulated 3 core multisranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminals including overhauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint be spraying enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as sepecified and directed by Engineer-in-charge. |
| 112 | M&l for GI tube light grade ISI marked laid in trenches in road crossing or fixed on pole with clamp made out of MS flat 25 x 4mm with bolts, nuts and washer of suitable size for cable protection of size 40 mm dia complete all as sepecified and directed by Engineer-in-charge. |
| 113 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion.Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender