Defence Statutory Bodies & Commissions/Committees Closing in 9 days TDR #58346737

Tender For Provn Of Civil Works For 750 Kw Solar Power Plant At Talbehat Mil Stn

Issued by Statutory Bodies & Commissions/Committees · Lalitpur, Uttar Pradesh
Tender Value
71.50 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
9 days left
EMD
1.32 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Lalitpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Provn Of Civil Works For 750 Kw Solar Power Plant At Talbehat Mil Stn

BOQ

Name of Work:- PROVN OF CIVIL WORKS FOR 750 KW SOLAR POWER PLANT AT TALBEHAT MIL STN
Sl. No. Item Description
1Note: (i) Please refer schedule 'A' notes before quoting the tender. (ii) Amount of Schedule of credit shall be deducted off line by the department.
2Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed.
3Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.
4Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hadr/dense soil complete all as specified and as directed.
5M&L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and as directed.
6M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured), complete all as specified and as directed.
7M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface, complete all as specified and as directed.
8M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and as directed.
9M&L for plain cement concrete type D-2 1:4:8 (using 40mm graded aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
10M&L for reinforced cement concrete Mix Design (M-25) using 20mm graded aggregate as in column footings & bases for columns complete all as specified and as directed.
11M&L for reinforced cement concrete Mix Design (M-25) using 20mm graded aggregate as in slabs supported on columns and beams complete all as specified and as directed.
12M&L for reinforced cement concrete Mix Design (M-25) using 20mm graded aggregate as in Chajja supported on columns and beams complete all as specified and as directed.
13M&L for reinforced cement concrete Mix Design (M-25) using 20mm graded aggregate as in beams, cantilevers, bressumers, lintels over 1.5m span complete all as specified and as directed.
14M&L for reinforced cement concrete Mix Design (M-25) using 20mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directed.
15M&L for formwork to sides of concrete foundations, footings, bases of colmns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to battr finished rough and flat complete all as specified and as directed.
16M&L for formwork to sides of pillars, posts, sturts, piers, columns and stanchions square, rectangular or polygonal finished rough complete all as specified and as directed.
17M&L for formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels, cantilever, shelves including supports, overhangs, etc. also splays between floors and beams, etc finished rough and flat complete all as specified and as directed.
18M&L for formwork to sides and soffits of suspened slabs such as roof slabs, floor slabs, ladings and similar work, not exc. 200mm thick (horizontal or sloping) finished rough and flat complete all as specified and as directed.
19S&F for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed.
20M&L MS TMT bars 6 to 8 mm dia in reinforcement cut to length bent to shape required including bending, cranking and hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete complete all as specified and as directed.
21Material & Labour brick work with old size fly ash bricks straight or curved on plan exc. 6 M mean radius built in CM 1:6 complete all as specified and as directed.
22M&L for brick work with old size sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:4 complete all as specified and directed.
23Rendering 15mm thick on fair faces of concrete block masonry in cement concrete 1:4 in two layers first coat 10mm thick in Cm 1:4 and second coat 5mm thick in CM 1:4 mixed with WPC @ 3% by weight of cement and finished fair and even complete all as specified and as directed. Note : Water Proofing compound shall be measured seperately.
24Supply only Liquid water proofing compound complete all as specified and as directed.
25M&L for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.
26M&L for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces complete all as specified and as directed.
27M&L for preparation of new plastered surfaces of wall over a coat of primer on surface and applying two coats of oil bound distemper complete all as specified and directed.
28M&L for preparation of new or prevously untreated plastered surfaces of walls and applying three coats of white wash on newly plastered on ceilings surfaces, complete all as specified and directed.
29M&L for preparation of new or prevously untreated plastered surfaces of walls and applying two coats of cement base paint , white or tinted complete all as specified and directed.
30Material and Labour for PCC 1:2:4 type B-0 using (12.5 mm graded stone aggregate) as in padding on roof top including WPC as per manufacturers instructions to achieve the slop required, with minimum thickness of 25mm consolidated and finished even and fair without using extra cement complete all as specified and as directed. (WPC shall be measured and paid separately)
31M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound as per manufacturer instructions on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.
32Material & Labour for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for Non approachable roofs :- (a) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. (b) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces. (c) One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame as per manufacturers instruction. (d) Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm complete all as specified and as directed.
33Supply and fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 65 mm x 125 mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company complete all as specified and as directed.
34S&F for 2nd class hard wood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed.
35Supply and fixing IInd class (hollock) hard wood factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.
36Supply & fixed 200 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
37Supply & fixed 150 mm long Extruded aluminium alloy handles, fabricated type anodised complete all as specified.
38Supply & fixed 100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed.
39S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified.
40S&F double legged door stopper of overall length of cover plate 150 mm of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors and rubber all as specified and directed by Engr-in-charge.
41Supply & Fixed in repairs aluminium Hat and coat hooks, solid body, 175mm to 250 mm complete all as specified and as directed.
42Supply & fixed MS helical door spring 300 mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats complete all as specified and as directed.
43S&F powder coated anodized aluminium frames for door, window , ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed by Engr-in-charge
44S&F Powder coated anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminium snap beading screws etc complete all as specified.
45S&F Powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified
46S&F powder coated aluminium anodized side hung type window/ventilators shutter without sash bars section weight not less than 0.55Kg/RM with extruded built up standard tubular and other sections of approved make according to IS(thickness of powder coating not less than 50micron including necessay glazing clips weight not less than 0.124Kg/Rm for fixing sheet glass anodized aluminium fittings/fixtures such as required number of roller of suitable size interlocking cleats/ plates etc as required for complete fixing window shutters complete all as specified and as directed by Engr-in-charge. Note:- Only aluminium shutters for the window shall be measured in sqm sheet glass and wiremesh etc shall be measured and paid in respective items
47M&L powder coated aluminium window shutter sliding type section not less than 0.55 Kg/RM, three shutter two glazed and one gauged including joining cleat,glazing cleap,rubber packing aluminium snap beading,screws,locking arrangement complete all as specified and as directed by Engr-in-charge.(Measurement shall be done leaf basis) Note:- Glass and Wiremesh paid Seprately.
48S & F Stailess steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple & complete all as specified and directed.
49S&F in position 4.8 to 5mm thick clear float glass of ordinary quality and glazing with glazing clips including necessary rubber packing to aluminium frame exc 0.5 sqm in each pane complete all as specified and as directed.
50M&L for two coat of synthetic enamel painting to new wood surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of pink primer complete all as specified and directed.
51M&L for two coat of synthetic enamel painting to new steel surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of red oxide primer complete all as specified and directed.
52M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
53M&L for broken stone or boulders hardcore of gauge not exc 63mm, deposited spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.
54Material & labour 75mm thick PCC 1:4:8 type D2 using 40mm graded stone agg as in sub base etc., complete all as specified and as directed by the EIC.
55M&L for 25mm thick cement concrete type B-0 under 12.5mm grade crushed stone aggregate as in sub base complete all as specified and as directed.
56M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and screed bed or bedding layer of 20mm thick in CM 1:6, complete all as specified and as directed.
57M&L for Machine cut kota stone slab as in skirting/risers etc 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and screed bed or bedding layer of 15mm thick backing coat in CM 1:4, complete all as specified and as directed.
58M&L glazed ceramic coloured tiles 300x450x7 mm thick on vertical surfaces including 10 mm thick on wall in CM 1:4,as backing coat set and joints cement slurry and jointed in white cement and pigments incl 75mm wide designed border tiles all as specified and directed.
59M&L Non skid coloured ceremic tiles 7 to 8 mm thick area of each tiles exc 0.09 sqm but n.exc 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including 15mm thick screed bed in CM 1:6 complete all as directed.
60M & L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and as directed.
61Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified.
62Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified.
63S&F PVC pipe (SWR) of any length with rubber ring joints laid in trenches or in floors of 75mm dia complete all as specified and as directed.
64S&F PVC (SWR) 'P' or 'S' trap of 110mm bore and fixed in position complete all as specified and as directed.
65M&L for PVC (SWR) multi floor trap with grating including jointing with solvent cement for diameter of 75 mm outlet complete all as directed.
66S&F 75 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls complete all as specified and directed.
67S&F 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls complete all as specified and directed.
68S&F 75mm dia PVC (SWR) bends with access doors any radius complete all as specified and as directed.
69S&F 110mm dia PVC (SWR) bends with access doors any radius complete all as specified and as directed.
70M&L for PVC (SWR) gully trap size of 125/110 mm, setting and jointing with solvent cement complete all as directed.
71Supply & fixing vitreous china wash down water closet of Pedestal pattern white including making connection to trap and to flushing pipe etc complete and making good to floor complete all as Specified and directed.
72S&F in repair 15mm bore stop cock angle valve type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.
73Supply & fixing plastic seat cover black/white of pattern W.C including fixing divice and Chromium plated nuts, complete all as Specified and directed.
74Supply & fixing Health foucet including PVC pipe 1.50m long with brass nuts for EWC, fixed in repairs complete all as specified and directed.
75S&F Vitreous china urinal half stall type coloured including waste pipe and fixing in position complete all as specified.
76S&F in repairs Viterous china wash hand basin white/coloured flat back size 550x400mm including brackets and waste pipe coupling fixed in position complete all as specified.
77S&F soap dish any type fixed to plug with chromium plated brass complete all as specified and as directed.
78S&F 600x450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or comercial plywood and fixed to wooden plugs with chromimum plated brass screw and cup washers and fixed in position complete all as specified and as directed.
79Supply & fixed in repair fancy type shower rose 125mm dia size of Rim and 30cm long CP brass pipe with swiwel joint complete all as specified.
80S/F GI tubing 15mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed
81S/F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed
82S&F bib tabs cast copper alloy with crutch or butterfly handle screwed down with pipe of 15mm dia complete all as specified and as directed.
83S&F pillar tap cast copper alloy with capastan head chromium plated screwed to iron pipe of 15mm dia complete all as specified and as directed.
84S&F Stop cock cast copper alloy screwed down with high pressure crutch or butter flu handle screw both ends for iron pipes of 15mm dia complete all as specified and as directed.
85S&F Stop cock cast copper alloy screwed down with high pressure crutch or butter flu handle screw both ends for iron pipes of 20 mm dia complete all as specified and as directed.
86S&F PVC connection of 45cm long 15mm dia and fixed in position complete all as specified and as directed.
87S&F PVC valveless syphonic action type flushing cistern low level of 10 ltr capacity with inlet valve float and handle including bracket complete all as specified
88S&F in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges all as specified and directed by Engr-in-charge.
89M&L for framed work as in window guard bars fixed in wooden frame including cut to required length complete all as specified and directed
90S&F of Rotational moulded polyethlene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified of 1000 ltr capacity including 20mm dia ball valves of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball complete all as specified and directed.
91S&F of Gun metal gate valve 20mm dia with iron wheel head screwed both ends for iron pipe and fixed in position complete all as specified.
92Surface dressing n. exc. 15 cm deep in soft soil complete all as specified and as directed.
93Removal of surplus soil exc.250m but n. exc. 500mm distance from the site and n. exc.1.5m height complete all as specified.
94Material & labour for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade laid over 50mm thick Sand cushioning layer etc complete all as specified and as directed by the EIC.
95M&L PCC coping (1:3:6) type C-1 using 20 mm graded stone aggregate as in coping including necessary form work, including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.
96Cutting the existing DI pipes 200 mm dia reducing to required length and in position insertion of new tees , branches etc complete all as specified and as directed.
97Supply and lay tubing ,medium grade galvanised with all fittings specials such as bend, elbows,tees, short pieces connection, back nuts, diminishig pieces, caps, plugs and unions etc laid in trenches/wall and floor of 25 mm dia bore of pipe complete all as specified and as directed. Note: Excavation and earth work will be measure and paid seperately
98Supply and lay tubing ,medium grade galvanised with all fittings specials such as bend, elbows,tees, short pieces connection, back nuts, diminishig pieces, caps, plugs and unions etc laid in trenches/wall and floor of 40 mm dia bore of pipe complete all as specified and as directed. Note: Excavation and earth work will be measure and paid seperately
99Supply and lay tubing ,medium grade galvanised with all fittings specials such as bend, elbows,tees, short pieces connection, back nuts, diminishig pieces, caps, plugs and unions etc laid in trenches/wall and floor of 50 mm dia bore of pipe complete all as specified and as directed. Note: Excavation and earth work will be measure and paid seperately
100Supply and lay tubing ,medium grade galvanised with all fittings specials such as bend, elbows,tees, short pieces connection, back nuts, diminishig pieces, caps, plugs and unions etc laid in trenches/wall and floor of 80 mm dia bore of pipe complete all as specified and as directed. Note: Excavation and earth work will be measure and paid seperately
101Supplying, fixing and testing of Ductile iron pipe fittings (Specials) heavy duty for any type (flanged/socketed) pipes such as, bends(any type radius,and angle), tapers, any type straight bend, increasing, decreasing or double socket etc) Tee pieces, ring branch, Y junction, double branch, cross (all socket or socket and spigot), collars, caps and plugs, adopters etc of any size radius and length conforming to IS 9523/2000 specifications with external bitumen coating and internal cement mortor lining and metallic Zinc coating of size 80 mm to 300 mm dia ore complete all as specified and directed by Engr-in-Charge.
102Supply and fix new gun metal globe valve 50 mm dia bore with iron wheel, screwed both ends for iron pipes approved all as specified and directed by Engr-in-charge.
103Supply and fix new gun metal globe valve 40 mm dia bore with iron wheel, screwed both ends for iron pipes approved all as specified and directed by Engr-in-charge.
104Supply and fix new gun metal globe valve 25 mm dia bore with iron wheel, screwed both ends for iron pipes approved all as specified and directed by Engr-in-charge.
105S&F CI sluice valve CI body ISI marked class PN 1.6 heavy duty flanged ends cast iron wheel with SS spindle of size 80 mm dia (ISI marked) conforming to IS : 14786 – 2000, short body all as specified including nuts ,bolt, washers and gasket all as directed by Engineer-inCharge.
106M&L for construction of brick masonary valve pit chamber od aize 950x950x950xmm including necessory earth work, PCC, copping plastering on internal surface of valve pit. Framed work for the valve pit chamber cover made of MS sheet angle equal angle 40x40x5 mm and MS sheet 3 mm thick confirming to Fe410-o and Fe 310-o including welding cutting hinjes locking arrangement complete and two coated synthetic paints applied on the valve pit cover all specified and directed by Engr -in charge(Ref drg no. CEBZ/TD/43/2011)
107Supplying only Car washer portable type complete with maching hose gun, lance nozzle and water filter suitable for max pressure 120 bar and max flow rates 350 ltrs/Hrs, 1500 watt suitable for 240 Volt AC 50 Hz power supply with cable length not less than 60 Mtrs and suction hose pipe length 30 Mtrs and flexible anti-twist weather resistant UV resistant thick water hose PVC pipe of size 15 mm nominal dia lenghth - 150 RM for optimal water flow with leak proof tap adapter compatible with delivery pipe of monoblock pumps ( as specified in above item) with suitable reducer/enlarger with clamp for cleaning and washing of solar panels including adjustalbe type water spary gun compatible with PVC hose size of 15 mm nominal dia built of high quality brass materials durable and rust proof solid brass structure to ensure quick connection and with durable accessories can withstand upto PSI water pressure and without any leakeage of wateall as per Car washer catlog No. No. AQT35-12, 1500 Watt complete all as specified and directed by EIC.
108Supply and Fix Rotational moulded polyethylene water storage tanks 2000 ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed by EIC. Please Enable Macros to View BoQ information
109Supply and Fix Rotational moulded polyethylene water storage tanks 2000 ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed by EIC. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58346737
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 71.50 Lakhs
LAST DATE 01-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of Civil Works For 750 Kw Solar Power Plant At Talbehat Mil Stn
Basic Detail
Tender No CEBZ/TAL/TOKEN/23 OF 2026-27
Bidding Type Tender
Location
City Lalitpur
State Uttar Pradesh
Key Dates
Publish Date 03 Nov 2026
Submission Date 01 Dec 2026
Open Date 03 Dec 2026
Finance
Tender Value 71.50 Lakhs
Tender Fee 1000
EMD 1.32 Lakhs
Exemption Not Available
Document List
02bb58fc-e1e9-4a16-91d9-8dd26bab8771.html
BOQ_894028.xls
Tender.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 03, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 01, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Dec 03, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

02bb58fc-e1e9-4a16-91d9-8dd26bab8771.html

xls

BOQ_894028.xls

pdf

Tender.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender