Tender For Maintenance Of Steel Furniture In Akhnoor Mil Stn Under Ge (S) Akhnoor.
Tender Value
35 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
2 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Steel Furniture In Akhnoor Mil Stn Under Ge (S) Akhnoor.
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART-I : BOQ OF WORKS FOR B/R WORKS. Note- Colour of polish and particle board to Steel Furniture as directed by GE. |
| 2 | REPAIR TO ALMIRAH LARGE STEEL Drg No. FD-67(M) FD-1031 |
| 3 | Replacement of old unserviceable/ broken/ damaged leg with new legs made out of 1 mm plane Galvanised iron sheet, complete all as specified and shown on drawing including welding of leg, all as directed by Engineer-in-Charge. |
| 4 | Replacement of old unserviceable/ broken/ damaged shelves with New Shelves made out of 1 mm plane galvanised iron sheet, including fixing with existing surfaces as shown on drawing, complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Replacement of old unserviceable/ broken/ damaged mild steel brackets with new bracket of mild steel including welding in existing for fixing shelves as per existing pattern complete, all as specified and as directed by Engineer-in-Charge. |
| 6 | Replacement of old broken/unserviceable door handle of almirah ,size 100mm long ,mild steel ,chromium plated of approved make , ISI Marked ,best quality,complete with nuts and pins , complete all as specified and shown in the drawing and as directed by Engineer-in-Charge. |
| 7 | Replacement of old existing broken/ unserviceable lock of any description and in any position with new brass locks . 75 mm with double keys,fixing with suitable screws/nuts, complete all as specified and directed by Engineer-In-Charge. |
| 8 | Replacement of old broken/unserviceable locking device of any description and in any position with new locking device, three ways, fixing with suitable screws/nuts including repair of locking device, complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Removing of dents and old paints by burning off with blow lamp removing dents including applying one coat of putty to make surfaces even cleaning the surfaces with sand papers/scrappers and smooth on internal and external surfaces, complete all as specified and as directed by Engineer-in-Charge |
| 10 | Preparation to old , decorated surfaces of the steel Almirah with shelves and spray painting with one coat of synthetic Smoke Grey paint of hammer tone of approved quality on internal and external surfaces, complete all as specified and as directed by Engineer-in-Charge. |
| 11 | REPAIR TO ALMIRAH MEDIUM STEEL Drg no. FD-67(M) FD-1032 |
| 12 | Replacement of old unserviceable/ broken/ damaged legs with new legs made out of 1 mm plane Galvanised iron sheet complete all as specified and shown on drawing including welding of legs, all as directed by Engineer-in-Charge. |
| 13 | Replacement of old unserveciable broken/damaged shelve with new shelves made out of 1 mm plane galvanised iron sheet, including fixing with existing surfaces as shown on drawing, complete all specified as directed by Engineer-in-Charge. |
| 14 | Replacement of old unserviceable/ broken/ damaged mild steel brackets with new bracket of mild steel including welding in existing for fixing shelves as per existing pattern, complete all as specified and as directed by Engineer-in-Charge. |
| 15 | Replacement of old existing broken/ unserviceable door handle of almirah ,size 100mm long ,mild steel ,chromium plated of approved make , ISI Marked ,best quality,complete with nuts and pins , complete all as specified and shown in the drawings and as directed by Engineer-in-Charge. |
| 16 | Replacement of old existing broken/ unserviceable lock of any description and in any position with new brass lock, 75 mm with double keys,fixing with suitable screws/nuts, complete all as specified and directed by Engineer-in-Charge. |
| 17 | Replacement of old broken/unserviceable locking device of any description and in any position with new locking device, three ways, fixing with suitable screws/nuts including repair of locking device, complete all as specified and as directed by Engineer-in-Charge. |
| 18 | Removing of dents and old paint by burning off with blow lamp removing dents including applying one coat of putty to make surfaces even cleaning the surfaces with sand papers/scrappers and smooth on internal and external surfaces, complete all as specified and as directed by Engineer-in-Charge. |
| 19 | Preparation to old , decorated surfaces of the steel Almirah with shelves and spray painting with one coat of synthetic Smoke Grey paint of hammer tone of approved quality on internal and external surfaces, complete all as specified and as directed by Engineer-in-Charge. |
| 20 | REPAIR TO CHAIR VERANDAH Drg no. FD-256 FD-359 |
| 21 | Replacement of old unserviceable/ broken/ damaged cane from chair verandah, cleaning to cane holes and weaving with new cane, plastic 4.0mm wide, 0.50mm thick, half round, approved quality weaving in \\"Matt/ Pattern\\" minimum weight of cane mentioned in drawing, complete all as specified and as shown in respective drawings and as directed by Engineer-in-Charge. |
| 22 | Preparation of old surfaces of Chair verandah with wire brush, steel scraper and surface rubbed with sand paper to remove small scale and rust so as to obtain a clean surface and applying one coat of synthetic enamel paint of white colour as per existing specifications, and welding on the joints or broken parts wherever is required or also fix rubber shoe of best quality to each leg bottom other all complete as specified and as shown in respective drawings and as directed by Engineer-in-Charge. |
| 23 | REPAIR TO CHAIR CB STEEL WITH ARM AND WITHOUT ARM Drg no. FD-75(M) |
| 24 | Replacement of old unserviceable/ broken/ damaged existing seat frame with new seat frame ,made of Ist class hard wood duly canned canned with cane,plastic ,2mm thick of 1st quality in godrej pattern including french polish ,complete all as specified and shown on drawing and as directed by Engineer-in-Charge. |
| 25 | Replacement of old unserviceable/ broken/ damaged existing back frame with new back frame ,made of Ist class hard wood duly canned canned with cane,plastic ,2mm thick of 1st quality in godrej pattern including french polish ,complete all as specified and shown on drawing and as directed by Engineer-in-Charge. |
| 26 | Replacement of old unserviceable/ broken/ damaged existing 02 x arms for one chair made of 1st class of hard wood size 410 x 50 x25 mm including painting in black clour to wooden portion with two coats of synthetic enamel black paint ,complete all as specified and shown on drawing and as directed by Engineer-in-Charge. |
| 27 | Prepration of the existing old decorated mettalic surfaces of the chair CB steel with Arms including welding at joints as required and fixed with 02 x stiffner at bottom of seat frame at each chair, spray paintings one coat of synthetic enamel olive green paint of approved quality and black colour paintings to wooden handles/arms or stiffners rest including prepration of surfaces ,complete all as specified and shown in the drawings and as directed by Engineer-in-Charge. |
| 28 | REPAIR TO LOCKER BED SIDE STEEL Drg No. FD-1029 |
| 29 | Replacement of old unserviceable/ broken/ damaged legs with new legs made out of 1.00 mm plane glavanised iron sheet ,size 100mm height and 60 mm wide including welding of legs ,complete all as specified and shown in the drawings and as directed by Engineer-in-Charge. |
| 30 | Replacement of old unserviceable/ broken/ damaged existing hasp and stapple of any description and in any position with new hasp and stapple chromium plated ,size 75mm x 40mm x3mm fixing with rivets or srews /nuts , complete all as specified and shown in the drawings and as directed by Engineer-in-Charge. |
| 31 | Replacement of old unserviceable/ broken/ damaged existing hinges of steel locker with new hinges ,mild steel ,chromium plated of approved make,size 75mm , fixed with screws/nuts and pins or rivetted, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge. |
| 32 | Replacement of old unserviceable/ broken/ damaged existing door handle of steel locker with new handles,mild steel chromium plated of approved make size100mm ,fixed with srews /nuts and pins , complete all as specified and shown in the drawings and as directed by Engineer-in-Charge. |
| 33 | Replacement of old unserviceable/ broken/ damaged conduit pipe with new conduit pipe at each locker ,mild steel chromium plated ,20mm dia and 1.60mm wall thickness ,complete all as specified and shown in the drawings and as directed by Engineer-in-Charge. |
| 34 | Prepration of the existing old decorated surfaces of locker bed side steel by removing of all dents and filling with putty and spray painting with one coat of synthetic enamel silver paint of hammer tone pattern of approved quality on internal and external surface ,complete all as specified and shown in the drawings and as directed by Engineer-in-Charge. |
| 35 | REPAIR TO TABLE DINING OR STEEL Drg No. FD-165(M) |
| 36 | Replacement of old unserviceable/ damaged top from table dinning Ors with new top made of 18mm thick prelaminated MDF board,commercial with one side teak face and teak wood edging 4mm thick all round the top , complete all as specified and and shown on drawing and as directed by Engineer-in-Charge. |
| 37 | Repair and welding to the serviceable /broken damaged joints of legs ,stiffners ,long rails and shorts rails ,made out of 25mm square mild steel pipe 1.6mm , fixed with 04 nos of rubber shoe at each end of the leg other complete all as specified and and shown on drawing and as directed by Engineer-in-Charge. |
| 38 | Prepration of the existing old decorated/ un decorated surfaces of table dining ORs and spray painting with one coats of synthetic enamel black paints of approved quality ,,complete all as specified and and shown on drawing and as directed by Engineer-in-Charge. |
| 39 | REPAIR TO TABLE OFFICE CLERK STEEL Drg No. FD-84(M) FD-1004 |
| 40 | Replacement of old unserviceable/ damaged top with new top made of 18mm thick prelaminated MDF boards ,commercial with one side teak face and teak wood edging 4.0mm thick all round the top , complete all as specified and and shown on drawing and as directed by Engineer-in-Charge. |
| 41 | Replacement of old unserviceable/ broken/ damaged old drawers of table office clerk steel with new drawers made out of 1mm plane glavanised iron sheet including fixing and welding ,complete all as specified and shown in the drawings and as directed by Engineer-in-Charge. |
| 42 | Prepration of the existing old decorated/ un decorated surfaces and removing denting whereever required and spray painting with one coats of synthetic enamelolive green paints of approved quality ,,complete all as specified and and shown on drawing and as directed by Engineer-in-Charge. |
| 43 | REPAIRS TO TABLE OFFICE OFFICER STEEL Drg No. [FD-84(M), FD-1003 |
| 44 | Replacement of old unserviceable/ damaged top with new top made of 18mm thick prelaminated MDF boards ,commercial with one side teak face and teak wood edging 4mm thick all round the top , complete all as specified and and shown on drawing and as directed by Engineer-in-Charge. |
| 45 | Replacement of old unserviceable/ broken/ damaged old drawers of table office officer steel with new drawers made out of 1mm plane glavanised iron sheet including fixing and welding ,complete all as specified and shown in the drawings and as directed by Engineer-in-Charge. |
| 46 | Prepration of the existing old decorated/ un decorated surfaces and removing denting whereever required and spray painting with one coats of synthetic enamelolive green paints of approved quality ,,complete all as specified and and shown on drawing and as directed by Engineer-in-Charge. |
| 47 | REPAIRS TO TEAPOY VERANDAH Dr No. FD-255 |
| 48 | Replacement of old unserviceable/ damaged top with new top made of 18mm thick prelaminated MDF boards ,commercial with one side teak face and teak wood edging 4mm half round thick all round the top , complete all as specified and and shown on drawing and as directed by Engineer-in-Charge. |
| 49 | Prepration of the existing old decorated/ un decorated surfaces and removing denting whereever required and spray painting with one coats of synthetic enamel white paints of approved quality ,,complete all as specified and and shown on drawing and as directed by Engineer-in-Charge. |
| 50 | Bed hard Steel frame Drg no. FD/E6/MAP/08R |
| 51 | Replacement of unserviceable/ broken/ damaged plywood top of Bed hard with new plywood top, 12mm thick with seven Nos. of ply, commercial, BWR grade, type BB, size 1974mmx850mm, fixed with nails, complete all as specified and shown in drawing and as directed by Engineer-in-Charge. |
| 52 | Preparation of the existing, decorated/ undecorated surfaces and removing denting and welding wherever is required and spray painting with one coat of synthetic enamel black paint of approved quality and fixed 04 x Nos of rubbeer Shoe of superior quality at the bottom of each leg of the Bed Hard, complete all as specified and directed by Engineer-in-Charge. |
| 53 | Replacement of unserviceable/broken/damaged Head Board and Foot board of Bed hard with new Head Board and Foot Board with MDF Board, complete all as specified and shown in drawing and as directed by Engineer-in-Charge. |
| 54 | Charpoy With hard Top Drg No. FD/MAP-II/04 |
| 55 | Replacement of unserviceable/ broken/ damaged plywood top of Bed hard with new plywood top, 12mm thick with seven Nos. of ply, commercial, BWR grade, type BB, size 1930mmx850mm, fixed with nails, complete all as specified and shown in drawing and as directed by Engineer-in-Charge. |
| 56 | Preparation of the existing, decorated/ undecorated surfaces and removing denting wherever required and spray painting with one coat of synthetic enamel black paint of approved quality,and fixed 04 x nos of rubbeer Shoe of superior quality at the bottom of each leg of the Bed Hard, complete all as specified and directed by Engineer-in-Charge. |
| 57 | Table 900 x 600 x 760 mm with and without drawer Steel Drg No. FD-1007 ,FD-1008 |
| 58 | Removing unserviceable table top & Supplying and fixing new table top, pre laminated particle board, one side laminated, 18 mm thick, exterior grade with 4 mm thick Teak wood beading duly french polished to obtain glossy finish all around the top and fix rubber shoes at bottom of each leg of table, complete all as specified and as directed by Engineer-in-Charge. |
| 59 | Material and labour for one coat of synthetic enamel paint to the frame of table including preparing the surfaces and removing denting and welding at the joints and broken parts wherever required complete all as specified and as directed Engineer-in-Charge. |
| 60 | Sofa Set 4/5 seater Drg No. (FD/MAP/II/02) |
| 61 | Taking down old unserviceable velvet/tapestry cloth from exisiting serviceable cushion of sofa set and supply & fixing new approval quality velvet/tapestry cloth not less than Rs 350/- per mtr duly stiched and having a zip cover complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 62 | Taking down old unserviceable cushions with cover of separate seat and back of sofa set and supplying and fixing new foam cushions 32 density of size 22\\"x21\\"x4 inch, duly covered with velvet cloth not less then Rs. 400/- per meter complete and having a zip cover all as specified and shown on drg and directed Engineer-in-Charge. |
| 63 | Form with and without back Drg No. (FD-77M, FD-1027 & FD-78M |
| 64 | Removing the unserviceable seat/back from with and without out back and providing separate new seat and back of size and shape shown in the drawing and directeed by Engineer-in-Charge. Painting/Polishing all exposed parts (steel/wooden) of form with and without back after repair/replacement of parts. |
| 65 | REPAIR TO CHARPOY GI PIPE PLYTOP Drg No. FD-220 |
| 66 | Replacement of old existing unserviceable/ damaged plywood top from charpoy GI pipe with new plywood top following under mentioned steps, complete all as specified as directed by Engineer-in-Charge.(a) Fixing 02 Nos stiffeners of mild steel angle iron 25mmx25mmx3mm, 900mm long, at equal distance and perpendicular to long rails of GI charpoy, fixing by drilling holes including counter sunk screws, nuts and washers at both ends on top side of long rails.(b) Drilling holes two Nos. of 7mm dia in each long rail, short rail and newly welded stiffener of mild steel angle iron.(c) Top of charpoy with plywood, 12mm thick, commercial, BWR grade, type BB, size 1980mmx900mm fixed to GI pipe frame with mild steel conter sunk screws, nuts and washers, as two Nos in each long rail, short rail and newly welded stiffeners of mild steel angle iron.(d) Painting of mild steel stiffeners with two coats of synthetic enamel black paint over one coat of zinc chrome primer after preparing the surfaces.(e) Painting of old/ new galvanised pipe of GI Charpoy and applying one coat of synthetic enamel paint of silver colour after preparation of surfaces. |
| 67 | Replacement of old unserviceable/ broken/ damaged existing long rails with new long rails for GI Charpoy, 32 mm bore GI pipe, medium grade, ISI marked, length as shown in drawings, complete all as specified and directed by Engineer-In-Charge. |
| 68 | Taking out old unserviceable/ broken/ damaged existing short rails from charpoy GI Pipe and replace with new short rail retrieved from damaged long rail under serial item Nos-16.02 here-in-before including cutting/ threading and fixing/ tightening in the existing charpoys including welding as required, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge. |
| 69 | Taking out old unserviceable/ broken/ damaged existing leg from charpoy GI Pipe and replace with new leg retrieved from damaged long/ short rail under serial item Nos- 16.02 and 16.03 here-in-before including cutting/ threading and fixing/ tightening in the existing charpoys including welding of 32mm dia washer at bottom of leg as end cap and mild steel clamps as FMN set, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge. |
| 70 | Replacement of old unserviceable/broken/damaged existing three way elbows GI from charpoy GI pipe with new three way elbows GI, 32mm bore, medium grade, (ISI Marked) wherever required, complete all as specified and shown in the drawings. |
| 71 | Chair School with Hand Board Drg No. FD/E6/MAP/05 |
| 72 | Replacement of old unserviceable/ broken/ damaged PVC Sheet form Chair school with new PVC Sheet of existing size and colour to Chair School complete all as specified and shown in the drawings and as directed by Engineer-in-Charge. |
| 73 | Replacement of old unserviceable/ broken/ damaged hand board from chair school with new hand board of existing size made of 18/19mm thick particle board prelaminated, exterior grade, duly covered with 4mm thick teak wood beading all around and fixed a hand board fixing device at the bottom of the hand board as hand board can attach with chair school, complete all as specified and shown in the drawings and as directed by Engineer-in-Charge.Note- colour of polish and particle board to wooden furninture as directed by GE. |
| 74 | Preparation to school chair with hand board and painting all around with black colour finish to all exposed to view surfaces, complete all as specified and as directed by Engineer-in-Charge. |
| 75 | Charpoy Folding IP with Hard Top Drg No. FD-388 (R) |
| 76 | Replacement of old unserviceable/broken/damaged Plywood with new plywood top following under mentioned steps, complete all as specified as directed by Engineer-In-Charge.(a) Charpoy IP tightning the complete Charpoy i.e loose check nuts M thick 7 Nos of Ply BWR wood ISI Marked in top of Charpoy of size 1980mm x 920mm and supply and supply 2x nos stiffners 'U' type per charpoy make to shape out of 1020x40x5mm thick flat iron fixed to frame with 4 nos of nuts and bolts and washed of size 6mm dia, 17mm long per stiffeners.(b) A total of 12 nos of nuts and botls with washer including 3 nos holes on each rails and 2 nos on each short rails and 2 nos holes on each MS flat iron shall be provided to fix the plywood with frame.(c) Nuts provided shall br galvanised counter shank. |
| 77 | Preparation of the existing, decorated/ undecorated surfaces and removing denting wherever required and spray painting with one coat of synthetic enamel black paint of approved quality and fixed 04 x nos of rubbeer Shoe of superior quality at the bottom of each leg of the Charpoy folding, complete all as specified and directed by Engineer-in-Charge. |
| 78 | Teapoy Varndah MAP Drg No. (FD/E6/MAP/17) |
| 79 | Replacement of unserviceable tops and S&F new top of Teapoy after minor repair making the structure stable.Top shall be 18mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE duly covered with 4mm thick teak wood beading in matching shade with synthetic adhesive (Fevicol Sh), complete all as specified and directed. |
| 80 | Taking down old unserviceable PVC shoes and S&F new PVC Shoes at the bottom of leg, complete all as specified and directed. |
| 81 | M&L for painting with two coats of synthetic enamel aluminium/Green paint over old painted surfaces including preparation of old steel surfaces complete all as specified and directed. |
| 82 | Book Case Steel Drg No. (FD-90/1028) |
| 83 | Replacement of old lock with new lock as per existing size conforming to relevant Drgs, complete all as specified and directed.by Engineer-in-Charge. |
| 84 | Replacement of broken glass 5mm from door with new glass 5mm, complete all as specified and directed.by Engineer-in-Charge. |
| 85 | Replacement of broken base of book case steel with new base as per existing size conforming to relevant Drgs, complete all as specified and directed.by Engineer-in-Charge. |
| 86 | Replacement of unserviceable door of book case as per existing size conforming to relevant Drgs, complete all as specified and directed.by Engineer-in-Charge. |
| 87 | Replacement of handles of book case steel with new Handle, complete all as specified and directed.by Engineer-in-Charge. |
| 88 | M&L for painting with two coats of synthetic enamel aluminium paint over old painted surfaces incl preparation of old steel surfaces complete all as specified and directed.by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender