Tender For State Plan-(2026-2027) Optimization Of Production And Transmission (Energy Conservation) Rwss To Adichippuzha-Design, Supply And Installation Of Cf Pumpset With All Accessories At Alimukku Booster Pump House-General Civil Work
Tender Overview
Project Description
Tender for State Plan-(2026-2027) Optimization Of Production And Transmission (Energy Conservation) Rwss To Adichippuzha-Design, Supply And Installation Of Cf Pumpset With All Accessories At Alimukku Booster Pump House-General Civil Work
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Nov-2026 | Date Corrigendum | Date | 20-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Appendix-A-Supplying ,erecting and commissioning of adequate capacity CF pump set at Alimukku Booster |
| 2 | OD258176/2025-2026:Supply , erection, testing, Trial run and commissioning of CF pump set with the following specification - 1. Pump - Supply, erection, testing and commissioning of KWA pre-qualified reputed make centrifugal pump set with Bronze/SS impeller, SS shaft and Design, Supply , erection, testing, Trial run and commissioning of CF pump set with the following specification - 2. Pump - Supply, erection, testing and commissioning of KWA pre-qualified reputed make centrifugal pump set with Bronze/SS impeller, SS shaft and CI pump casing with suitable types base plate with coupling, coupling guard, foundation bolts and nuts etc. complete including providing suitable concrete foundation including cost of material etc. complete. as per CEA regulation 2010 and present code of practice for 19.0 lps against a total head of 135 M including cost of all required protection equipment with an efficiency not less than 70%, Suction head positive suction3. Motor Supply, erection, testing and commissioning of KWA prequalified reputed make horizontal solid shaft foot mounted TEFC squirrel cage induction motor suitable for the above pump working on 3 phase 50 Hz Ac supply, working voltage 415V/3300 V(select suitable), 1500rpm. The motor shall confirm to Latest IE standards, including providing suitable concrete foundation, including cost of materials etc. complete for 3300 V motors digital motor protection. Relay shall be included in starter as per present IE rules. . Flexible coupling shall be used for coupling of pumps and motors .4. Starter. Supply erection testing and commissioning of suitable rating FCMA starter . Here soft starter to be provided. Starter suitable for the above motor with over voltage and under voltage protection, single phase preventer, overload relay with motor protection relay with main contactor and bye pass contactor as per IE rules and code of practice etc complete.5. Panel board - Supply , erection, testing and commissioning of cubical type wall mounted MS fabricated dust and vermin proof common control panel board consisting of 1 No. suitable capacity motor protection MCCB as incomer and and No of suitable capacity MCCB as outgoing providing suitable size Aluminium bus bar to interconnect the above MCCBs and fitted with 3 Nos of indicator lamps,1 no. volt meter with selector switch ,1 no. Ammeter with selector switch for measuring current in each phase etc. complete and provided with a common earth bus for the entire panel and inter connect with the MCCBs as per IE rules and code of practice. The panel shall be fitted on a common base frame on suitable foundation. 6. Cabling work - Supply, laying testing and commissioning of suitable size XLPE copper cables for the above pump set from panel board to starter and from starter to motor considering energy conservation for a total length of 10 M. 7. Earthing - Supply of all materials and providing suitable earthing by using suitable size pipe /plate earthing GI/copper strip buried in ground and giving double earthing to motor, starter, panel board etc. as per IE standards. 8. Capacitor - Supply, erection testing and commissioning of heavy duty APP capacitor for the motor to get a power factor above 0.95. Capacitor should be connected to external contactor, and the capacitor shall confirm to IS 28349.Valves and Pressure gauges ? Supply, Erection and commissioning of suitable size best quality heavy duty ISI marked CI double flanged Sluice Valve electrical actuator (capable of operating in Fully, Semiautomatic modes and also in manual mode), Non Return Valve and Pressure Gauges with suitable Pressure rating. Fitting of valves shall include proper RCC support. In case of positive suction pipes set sluice valve should be in suction as well as delivery sides for easy repair works. 10. Suction and delivery pipe connection - Supply and fitting of suitable size best quality MS pipe of shell thickness not less than 10 mm for a total of 10 m. suitable for the above pump set and suitable size foot valve and connecting the suction pipe and valve with suitable flanges, nut and bolts IR sheet etc complete and connecting the delivery side of thr pump with the valves and suitable specials to connect the pumping main. If the dia of suction pipe is above 80 mm CI pipes and specials shall be provided. Efficiency of pump set shall not be less than 70 %. 11) WarrantyA comprehensive warranty of five (5) years shall be provided for the pump set, motor, and associated components. Although the initial design has been prepared by this office, the contractor shall review the design and, if necessary, redesign the system and obtain approval from competent authorities before execution.12) DocumentationSubmission of: Manufacturer?s test certificate, Operation and maintenance manuals, Commissioning reports including alignment, vibration, current, and voltage readings13) ComplianceAll works shall conform to IE rules, relevant IS standards, and KWA Order No. 9710/AE15/2021/KWA dated 08/02/2023. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender