Tender For Infrastrure And Improvment Work Under Road Safety At Karhal Chauraha Sh84
Tender Value
4.70 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
4 days left
EMD
47000
Bank guarantee accepted
Document Fee
767
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mainpuri → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Infrastrure And Improvment Work Under Road Safety At Karhal Chauraha Sh84
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying tack coat with bitumen V.G.-10 using pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. Exculding GST. |
| 2 | Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.Exculding GST. |
| 3 | Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects.Exculding GST. |
| 4 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms/sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35. The finished surface to be levelled uniform and free from streaks and holes as per pwd specifications. Exculding GST. |
| 5 | TRAFFIC SIGNS - SPEED LIMIT Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign (60cm circular) as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing Chap-14, Item No. 18(iii) Exculding GST. |
| 6 | TRAFFIC SIGNS - JUNCTIONS BOARD Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign (90cm triangular) as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. Chap-14, Item No. 18(i) Exculding GST. |
| 7 | TRAFFIC SIGNS - SPEED TABLE Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign (90cm triangular) as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. Chap-14, Item No. 18(i) Exculding GST. |
| 8 | Aluminum backed flexible prismatic sheetAluminum backed flexible prismatic sheeting shall be made of yellow coloured flexible prismatic sheeting with non metallic presmatic lens formed in a transparent, synthethic resin as rectro reflective elements. This flexible preismatic sheeting shall have black & yellow strips with aluminium backed flexible prismatic type-VI sheeting conforming to ASTM: D4956. specifications and standards of coefficient of retro reflectivity, flexibility and impact resistance applicable for reboundable devices. This flexible prismatic sheeting shall have screen printed arrow/slant line pattern in black colour in a continuous roll format width of object marker shall be 300mm. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-charge. (Chp-14, Item No. 24) Exculding GST. |
| 9 | TRAFFIC SIGNS (Accident prone area)- Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign (60x45cm) as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing Chap-14, Item No. 18(v) Exculding GST. |
| 10 | Delineator supply & fixing of MS Delineator made of Mild steel with pure polyester power coated with the minimum thickness of powder coating of not less than 40micron for protection against corrosion the surface should be consited so that there should not be any exposed surface without powder coating alternatively these metal guide poles can be consiled with thermoplastic body the posts shall have tan ellispesoidal or circular design with the height of the pole shall be 800 to 900mm about the ground with about 200to300mm base which can be ancored owen to the ground mild steel guide polses shall confirme to type XI sheeting specification as per IRC: 67 & ASTM D4956 which would ensure to tested obtaine clear visiubilty road alignment during night time the rectro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of rectro reflection day time colour and luminance shrankage flexibility liner removal adhsion empact ressestant spactular glass and fungus ressetent 3 year out door weathering and its having passed these test shall be obtain from internation/govt. labourator/ institue by the manufacturer of the sheeting and incase the certificate is obtain from internation condition it should also be obtain from indian condition within 3 year of launching of product by the manufacture in award altenativily a certificate cofirming to ASTM speicification (D4956-09) on the artificial aslarated weathering requirement from a reputaed laboraty in india can be accepted provincialy in such a suitation the employer/clint if so desires could she for a performance guirantee which would be reliesed after received of certificate making the report shall be uploaded which coating tender the rates shall include all material, labour, T&P, transportaion installation and accidental all complete as per direction of Enginner in Chief. (Chap-14, SI. No. 1) Exculding GST. |
| 11 | Providing a& Fixing of pavment Makers (Cat Eye) Type X-ASTMD-4956-04 Avery Dennison/3-M (USA Make) consisting of ASA plastic housing fitted with tightly aderent plotting compound. The housing shall contain prismatic two glass coverd prismatic reflective face to reflect light I/C all tax.Exculding GST. SCHEDULE - “C”The materials shall be issued to the contractor as following:-S. No. Name of Material Unit Rate of Bitumen P/MT at which Place of issue deduction shall be made (Rate in Rs.)1 Bitumen VG-10 MT 54600.00 P.D., P.W.D. Store at MainpuriConditions:-1- There shall have no claim of contractor, if the material is not issued by the department due to non-availability in store or any other reason.2- The unconsumed material issued in excess of bonafide consumption norms, shall have to be returned back to the store as mentioned above, failing which a recovery at the punitive rate, i.e., double the issue rate shall be made from the contractor’s bill.3- Contractor have to return empty bitumen drums/emulsion drums immediately, failing which a recovery at the punitive rate i.e., Rs. 3000 per drum shall be recovered from the contractor’s bill.4- The departmental road roller if spare, shall be made available to the contractor at site @ Rs. 2500 per day including POL charges, wages of driver and cleaner. If roller is kept idle due to non-availability of material or labour, recovery @ Rs. 2500 per day shall be made from contractor’s bill for idle period. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender