Tender For maintenance of Village(Revitalizing And Redevelopment Of Pond Of Its Culture Heritage With Modern Recreational Facilities Of Brahma Sarovar At Village Gejha, Sector-93) Noida
Tender Value
5.99 Crore
Estimated cost
Bid Submission
16 Nov 2026
9 days left
EMD
11.99 Lakhs
Bank guarantee accepted
Document Fee
8260
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance of Village(Revitalizing And Redevelopment Of Pond Of Its Culture Heritage With Modern Recreational Facilities Of Brahma Sarovar At Village Gejha, Sector-93) Noida
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing R.C.C work manually by mechanical means including stacking of steel bars and disposal of unserviceable material with 50 metres lead |
| 2 | Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material with 50 metres lead |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. The contractor has to detect different utilities like sewer line , water supply line , Electric cable , Telephone cable , Gas pipe etc. using utility detecting machine before start excavation only after getting permission of Engineer-in - Charge .All kinds of soil. |
| 4 | Providing and Laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level : 1:4:8 (1 cement : 4 coarse sand (Zone - III ) : derived from natural source : 8 Graded stone aggregate 40 mm nominal size derived from natural sources). |
| 5 | Steel reinforcement for R.C.C Work Including straightening, cutting ,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically treated bars of grade Fe- 500D or more. |
| 6 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.:Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content,the contractor shall have discretion to either re-design the mix or bear thecost of extra cement. All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 7 | Earth work in Embankment in ordinary soil embankment to be in 20cm layers including ramming. Dressing the surface to required levels with half tonne steel or wooden rammer and rolling every third and top most layer in roller 8 to 10 tonne capacity and including 1.50mtr, lift and all lead (earth shall be brought from a placewhich including cartage of earth by mechanically transport and T&P. labour etc. required for proper completion, Earth shall be arranged by the contractor at his cost :All kinds of soil |
| 8 | Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site. |
| 9 | Dry stone pitching 22.5 cm thick laid in courses and required profile withhammer dressed stones having no side less than 15 cm, with minimumdepth of 20 cm including preparing the bedding surface etc. all complete.(Payment for Stone to be made separately). |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 100.0 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 11 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 40graded stone aggregate ) finished with a floating coat of neat cement , including cement slurry , but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate |
| 12 | Providing and fixing 18 mm thick gang saw cut,mirror polished, premoulded and prepolished,machine cut for kitchen platforms, vanity counters , window sills , facias and similar location of required size , approved shade , colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand ) , joints treated with white cement , mixed with matching pigment , epoxy touch up , including rubbing , curing, moulding and polishing to edges to give high gloss finish etc. complete as all levels . area of slab over 0.50 sqm |
| 13 | Stone work (machine cut edges) for wall lining etc. (veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of cramps which shall be paid for separately):Red sand stone - exposed face machine cut and Table rubbed with rough backing.70 mm thick. |
| 14 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature(wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainlesssteel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 15 | Providing and Fixing Stainless steel wire guage (Grade -304) aperture 1.4mm and 0.5mm dia wire including nut bolt washers required size for fixing etc all complete. As per design and drawing directed by engineer in charge. |
| 16 | Steel Work welded in bulit up sections / framed work including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required . In gratings , frames , guard bar , ladder , railing brackets , gates and similar works. |
| 17 | Providing and fixing Anchor bolts with nuts (M-20) including nuts and washers complete. Ref. pg. no. 47 |
| 18 | Appliying Priming coat with ready mixed red zinc chromate primer of approved brand and manufacturing on steel galvanised iron / steel works. |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : two or more coats on new work over an undercoat of suitable shade with ordinary paint of approved brand and manufacture . |
| 20 | Supplying, installing, testing and commissioning of a set of two nos. centrifugal non clogging, self mounted vertical submersible sump pumps for handling drainage waste water, capable of delivering the specified discharge at the specified head & capable of handling 25 mm dia solids. The motor (Motor efficiency IE-3) shall be suitable for 415 ± 10% volts, 3 phase, 50 Hz A.C. power supply. The pump set shall include an automatic starter control panel with 5 M of power and control cabling. Each Pump shall be supplied and installed with non return valve and isolation valve on the GI C class delivery line and shall be equipped with low and high level controllers suitable for automatic / manual operation with lifting chain arrangement as per standard practice.Items includes piping heeader , valves , non return valve , pressure guage and termination as required as per site condition. |
| 21 | Providing and laying Light duty NP2 class R.C.C. pipes confirming to IS : 458 : 2003 with latest amendment with craddle : ref pg 67c) 300 mm Dia |
| 22 | Providing and laying Light duty NP2 class R.C.C. pipes confirming to IS : 458 : 2003 with latest amendment with craddle : ref pg 67 250 mm Dia |
| 23 | Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. ref. pg. 84 |
| 24 | Supply, fixing, testing an dcommissioning of 5HP aerator motoe with suitable float & accessories. The motor shall be a 5 HP, 380 Volts, three phase, 50 Hz submersible motor operating with starter panel. The float shall be made of seamless, one piece high density polyethylene plastic, filled with high density closed cell polyurethane foam. The float shall be capable of providing full floatation id the shell is punchered or craked. The supportframe for the aerator shll be constructed of type 304 stainless steel tube welded single nozzle with multi outlet made in brass with crome plated including lights. |
| 25 | Supply, fixing, testing an dcommissioning of 5HP aerator motor with suitable float & accessories. The motor shall be a 5 HP, 380 Volts, three phase, 50 Hz submersible motor operating with starter panel. The float shall be made of seamless, one piece high density polyethylene plastic, filled with high density closed cell polyurethane foam. The float shall be capable of providing full floatation id the shell is punchered or craked. The supportframe for the aerator shll be constructed of type 304 stainless steel tube welded single nozzle with multi outlet made in brass with crome plated including lights.Drainage Sump Pit, Each pump shall have following duties and both pumps should working at high flow. Flow rate = 250 LPMHead = 15 Mtrs. |
| 26 | Providing Grafitti on Metro Pillars and Wall with complete water base paint of Asian Paint or similar As per Quotation by Ozone Ceramic or Similar |
| 27 | Mural Sizelength-4.6mheight-3.4mmaterial thickness-5-6mmsupported with ms framing.Design life- 10-12 yearscolours- stone looking |
| 28 | Providing & Fixing Foot Light Model No: Lx919/12w Body: Black CCT: 3000KWattgae: 12W |
| 29 | Providing & Fixing Pole Light Body Black Size : 2090mm x 560 mm cct: 3000k wattgae: 3w to 6w Driver : Philips |
| 30 | Providing & Fixing Bollard Light size: 800mm x175mm Body Black ms cct: 3000k wattgae: 10w |
| 31 | Dustbin - MSWD8 Dim:- 370Lx340 w x 875 Hmm. Capacity -50 Ltr. Construction :- G.I. powder coated frame with 70x12 mm synthetic wood planks cladding (synthetic wood is a composite material of wood & plastic which make it termite free and weather resistance & has a good self life) Inner Removable Bin for Waste removable. Til able front lid. |
| 32 | Supplying, fixing, testing & commissioning of 415V ,3Phase 50Hz, 4wire system,sheet steel clad,dust & vermin proof cubical & outdoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2mm/1.6mm CRCA sheet steel complete with aluminium Bus Bars, Providing & Fixing of base plate /channel, P/F the following Switchgears,complete with earth Bus Bar throughout the length of the panel,terminal arrangement for incomings/outgoings cables and also outgoing terminations for various sizes of cables,the incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement,adequate size bus duct/cable alley, Sign riting,Painting,Earthing,Numbering,Danger plate etc. Compleete as requried,numbering, danger plate etc. complete as required as per specification and drawing.1 nos. 100A, 415V, Ics=25KA, 4P MCCB with microprocessor release having O/L, S/C E/F,O/V & U/V protection. , 1 nos. Digital type multi function meters (V+A+Hz) with cast resin CTs 100/5A.1 Set of phase indicating lamp with MCB 1 nos TPN surge protection device of class 1& 2160A TPN Bus bar of aluminimum alloy. 2 nos. 63A 415V, TP+N MCCB of 25KA 9 nos. 40A 415V, TP MCCB of 25KA with DOL starter.2 nos. 40A 415V, TP MCCB of 25KA.1 nos. 40A 415V, TP+N MCCB of 25KA. |
| 33 | 1 nos. 40A, 415V, Ics=25KA, 4P MCCB with microprocessor release having O/L, S/C E/F,O/V & U/V protection. 1 nos. Digital type multi function meters (V+A+Hz) with cast resin CTs 40/5A.1 Set of phase indicating lamp with MCB 1 nos TPN surge protection device of class 1& 2 , 63A TPN Bus bar of aluminimum alloy. 3 nos. 32A 230V, DP RCCB 18 nos. 16A 230V, SPN MCB |
| 34 | Providing & Fixing GJ-HITECH WATER COOLER ( MODEL: SS100/100) |
| 35 | Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as perdirection of officer incharge.officer in charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender