Defence Statutory Bodies & Commissions/Committees Closing in 2 days TDR #58343871

Tender For Repair/ Maintenance Of Submersible Centrifugal/ Monoblock Pumpset, Starter, Cleaning Of Water Reservoir/ Sump, Changing Of Filter Media And Certain Allied Works At Diat (Du) And Milit Girinagar Pune- 25

Issued by Statutory Bodies & Commissions/Committees · Pune, Maharashtra
Tender Value
35 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
2 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair/ Maintenance Of Submersible Centrifugal/ Monoblock Pumpset, Starter, Cleaning Of Water Reservoir/ Sump, Changing Of Filter Media And Certain Allied Works At Diat (Du) And Milit Girinagar Pune- 25

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 17-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 24-Nov-2026

BOQ

Name of Work:- REPAIR/ MAINT OF SUBMERSIBLE CENTRIFUGAL/ MONOBLOCK PUMPSET, STARTER, CLEANING OF WATER RESERVOIR/ SUMP, CHANGING OF FILTER MEDIA AND CERTAIN ALLIED WORKS AT DIAT (DU) AND MILIT GIRINAGAR PUNE- 25
Sl. No. Item Description
1Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE (I) R&D GIRINAGAR, PUNE-25 NAME OF WORK : REPAIR/ MAINT OF SUBMERSIBLE CENTRIFUGAL/ MONOBLOCK PUMPSET, STARTER, CLEANING OF WATER RESERVOIR/ SUMP, CHANGING OF FILTER MEDIA AND CERTAIN ALLIED WORKS AT DIAT (DU) AND MILIT GIRINAGAR PUNE- 25 Contract No: GE(I)R&D/GNR/TOKEN 22 OF 2026-2027 Serial Page No _______ Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of item Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words
2M&L for disconecting of elctric connection and taking out the unserviceable pumpset including dismantling of defective/unserviceable submersible pump motor set of any cap (7.5 HP to 75HP) from Jack well/ UG sump, and transport to work shop and bringing back and lowering the pump set after rectifing defects or carrying out necessary repairs / replacement of defective parts , nut bolt rubber packing etc all as specified and directed by Engr-in-Charge. Note : (i) Spares for repairs/rewinding of pump/motor will be measured and paid separately. (ii) Costs of all necessary Lath work & T&P required at site and transportation is deemed to be included in the rates quoted.
3M&L for rewinding of u/s submersible motor with new PVC insulated copper winding wire for same gauge and weight to existing winding wire including replcement of u/s parts like thrust plate, throust bearing, motor bush uper & lower, sleave, seal , sand guard, insulation paper & materrials,coupler sleeve with key and testing complete all as specified of following capacities :- (a) 20 HP
4(b) 75/60 HP
5M&L for carrying out repair to submersible pump after dismantling the assembly complete for replacement of worn out spares such as stage bowls, impellers, pump shaft, sleeves, bushes etc; including filling, turning & polishing works to pump shaft, GM impellers if necessary, reassembling the pump after repairs and testing complete including applying a coat of water proof epoxy paint to the external surfaces of pump all as specified and directed of following capacity :- (Note : Any spares requires to be replaced will be measured and paid separately).(a) 20 HP
6(b) 75/60 HP
7S & F in repair/replacement GM impellers for submersible pump with key and bushes suitable for complete all as specified and directed. (a) 20 HP
8(b) 75/60 HP
9S & F in repair/replacement Pump Shaft steel for submersible pump suitable for complete all as specified and directed :-(a) 20 HP
10(b) 75/60 HP
11S & F in repair/replacement Bearing bush for submersible pump suitable for complete all as specified and directed :-(a) 20 HP
12(b) 75/60 HP
13S & F in repair/replacement CI bowl assembly for submersible pump suitable for complete all as specified and directed :-(a) 20 HP
14(b) 75/60 HP
15S & F in repair/replacement Neck rings for pump sets of any size/ capacity complete all as specified and directed.
16S & F in repair/replacement Distance sleeve suitable for pump sets of any size/capacity complete all as specified and directed.
17S & F in repair/replacement Coupling suitable for pump sets of any size/capacity complete all as specified and directed.
18Dismantling of unserviceable centrifugal/monoblock pump motor sets of any size/capacity after disconnecting electric and water connections and transportation from site to work shop and back for carrying out repairs work, replacement of unsv parts with new part as required incluidng re-fixing in position and connecting and testing complete all as specified and directed.
19M&L for opening up unserviceable electric induction motor, 3 phase AC 440 Volts, cutting and removing the burnt winding coils complete and re-winding the same with super enamelled copper conductor wires of appropriate size as per the existing gauge all necessary insulating materials, varnishing, dryining etc including refixing in position, connecting and testing complete all as specified and directed at site for the following capacity :-(a) 2/3 HP
20(b) 7.5/15 HP
21(c) 20 HP
22(d) 40/50HP
23S & F in repair/replacement terminal in connector for motors of the following capacity:(a) 2/3 HP
24(b) 7.5/15 HP
25(c) 20 HP
26(d) 40/50HP
27S & F in repair/replacement PVC fan blade for motors of the following capacity.(a) 2/3 HP
28(b) 7.5/15 HP
29(c) 20 HP
30(d) 40/50HP
31S & F in repair/Replacement of pump end ball bearing suitable for following capacity. (a) 2/3 HP
32(b) 7.5/15 HP
33(c) 20 HP
34(d) 40/50HP
35Dismantling of transmission shaft of pump, buildingup wornout metal to required level, machining to the under size on lathe machine, grinding and finishing to required size to match the sleeve, and fixing into the housing, alignment and check with dial gauge indicator complete all as specified and directed for following capacities:(a) 2/3 HP
36(b) 7.5/15 HP
37(c) 20 HP
38(d) 40/50HP
39Dismantaling of existing main squirrel cage induction motor by uncruling/cutting nut bolts,cable connections ,earth connectinons and trasportation to workshop for periodical maintenance /servicing of motor pump set including varnishing of winding with graded varnish ,heating of winding in oven at specified tempreture and dehydrate the winding complete.greasing of bearing and bushing ,scraping of old paint ,prepairing the surface by using redoxide primer and paiting of motor as per colour code and mark the MES/SM number.Split opening of pump ,checking of bearing /busing impellers ,greasing of bearing /busing ,empellar replace whether required as existed and assembling complete motor pump set by replacement of nut bolts gland packing ,papper packing ,etc. and testing complete up to the entire satishfaction of Engr-in-charge. (a) squirrel cage induction motor pump 5/7.5 HP
40All as per item herein above but for Mono block pump set 15 /20 HP
41S & F in repair/replacement fully automatic star delta starter, 75 HP capacity , 3 phase 440 volt in sheetmetal enclosure complete with over load protection with adjustable relay, electronic timer relay and including provision of MS flat strips of suitable size and shape duly drilled for fixed to wall , its connection including taking out complete all as specified.
42All as per item herein above but 20/30 HP capacity.
43All as per item herein above but 7.5 HP capacity.
44S & F in repair/replacement pump motor starter contactor (as per existing make and model) of capacity 10 to 25 HP motor including its connection and testing complete all as specified.
45S & F motor protection relay ,flush mounting with display, last trip data recording, Protection with Thermal overload with pre alarm, short circuit, earth fault, phase loss, unbalance, phase reversal, under current, prolong starting, locked rotor complete all as specified and directed.
46Supply and laying Fresh Quartz sand, gravels & pebblels of size 0.45mm to 40 mm and coefficient of uniformity shall be between 1.3 to 1,7 and silica content should not be less than 90% including removal of old filter Bed Media (Gravel & sand ) from Filter Bed of any size not exc. 1.5 mtr in depth as per existing arrangement and as per standard practices as mentioned below within the stipulated time period by employing suitable no. of labour with necessary tool and plant to complete work on or before the stipulated time including cleaning of filter bed media (Gravels only with fresh/clean water till complete removal of tiny dirt deposite on gravel and make it suitable to reuse and proper segmentation Gravels and sand complete & including refilling (Loose) of filter Bed Media (Old Gravel & newly provided quartz sand ) inside filter Bed of any size upto depth as per directed by Engineer-in-charge and as per standard practices as mentioned below within the stipulated time period by employing suitable no. of labour with necessary tool and plant to complete work on or before the stipulated time complete all as directed. Note: Thickness for each layers and laying sequence as per sand size complete all as specified and directed.
47Supply only of Calcium hypochlorite granular form with chlorine content of 65% to 70% in 45 kgs packing for pre chlorination and post chlorination for dosing/filling in drinking water as per following generic specification complete all as specified and as directed.(a) Available Chlorine min - 65% by mass(b) Particle size (passing through 1.70 mm IS sieve) min - 99 % by mass(c) Water insoluble matter max - 6%(d) Calcium Hydroxide max - 4%(e) Sodium Chloride max - 15%(f) Loss of chloride on basis of available chloride max - 1/15.
48Supply only of Non ferric Alum Grade-I in 20 Kgs pieces commercial for dosing/filling in drinking water treatment complete all as specified and directed.
49M & L for repairing/calibration of water Level Indicator device operating on Single phase supply, direct display in system in meter/ Centimeter or other scale of water level of Sumps/Over Head Tank ensuring alaram while water fall or rise at predetermined limit,1 Minute auto Off alarm complete all as specified and directed.
50M&L for dewatering & Cleaning of the under ground sump for fresh water (sedimentation tank) of 1.5 lakhs gallon capacity semi- under ground and removing accumulated silt / sludge from bottom of sump (Approx 20-30 cm thick) along with foreign materials including dewatering of the sump well complete and removing to a distance exceeding 50 m but not exc. 100m including cleaning and watering rubbing with coir brush for walls and bottom of the reservoir with fresh water by adding bleaching powder for disinfection (approximate area not exc. 450 Sqm), clean the all valve pit chamber by removing mud dust internally and remove grass/vegetation up to 30 cm all side of valves pit chamber. clean valves and chamber cover and apply one coat of red enamal paint to the cover and black enamel paint over valves body marks with white paint and including white washing with one coat of lime and painting the date of cleaning, due date of cleaning and capacity of tank and repair to the water tank etc complete all as specified and as directed at filteration plant DIAT (DU) Girinagar, Pune - 25.
51All as per item herein above but for fresh water (storage tank) of 1.0 lakh gallon capacity at filteration plant DIAT (DU) Girinagar, Pune - 25.
52All as per item herein above but for raw water (service reservoir) of 30000 gallon capacity (approxmiate area not exc. 150 Sqm) near bungalow No. P-1, DIAT (DU) Girinagar, Pune - 25.
53All as per item herein above but of capacity 50,000 Gallons (approximate area 225 Sqm) at power house, DIAT (DU) Girinagar, Pune - 25.
54All as per item herein above but of capacity 15,000 gallon (approximate area not exc 70 Sqm) at ABC block, DIAT (DU) Girinagar, Pune - 25.
55All as per item herein above but of capacity 15,000 gallon (approximate area not exc 100 Sqm) at Pump House for POINTS hostel, DIAT (DU) Girinagar, Pune - 25.
56All as per item herein abovebut of 50,000 gallon capacity at New Multi Storey, DIAT (DU) Girinagar, Pune - 25.
57M & L and required T&P for cleaning of Jackwell of size 7.5 m dia 11 m depth removing the sludge/silt 1.5 m from the bottom of the well through sludge pumps and manual lifting cleaning complete all as specified and as directed.Note: - (i) Before quoting the contract, contractor should visit the site atleast once. (ii) This rate quoted deemed to include the cost of T&P utilized for cleaning. (iii) Cleaning will be carried out without disturbing water supply. (iv) Timing duration of cleaning will be directed by concerned JE & Engr-in-charge.
58M & L for cutting of grass , bushes/ cleaning of all type of vegetation and drain in Pump house/bore well area complete all as specified and directed by Engr-in-Chrge.Note:- Chemical for vegetation and other tools as required for maintenance of plant and tools required for keeping surrounding area and installation in presentable shall be provided by contractor. Cleaning of pump house area will be carryout in each two/three month in entire period of contract.
59M & L for MS column pipe 100 mm nominal bore , heavy duty ,in 3 mtr length with MS flanges screwed and welded both ends flanges fabricated with 10 mm thick MS plate with 2 nos slots of suitable size cut on each sides for drawing of submersible cable complete all as specified and directed by Engr-In-Charge.
60M & L for MS column pipe 150 mm nominal bore , heavy duty ,in 3 mtr length with MS flanges screwed and welded both ends flanges fabricated with 10 mm thick MS plate with 2 nos slots of suitable size cut on each sides for drawing of submersible cable complete all as specified and directed by Engr-In-Charge.
61S& F in replacement MS clamp for 6'' pipe for 75 HP Pump at Jackwell all as specified and directed.
62S& F in replacement MS clamp for 4'' pipe for 20 HP Pump at Jackwell all as specified and directed.
63S & F in repair/replacement submersible cable 35 sqmm 3 core flat cable copper conductor of following size, ISI marked.
64S & F in repair/replacement submersible cable 16 sqmm 3 core flat cable copper conductor of following size, ISI marked.
65M&L for water proof cable jointing kit with hardner compound complete suitable for submersible cable PVC insulated and sheathed, 16/25 Sqmm flat, 3 core, 1100 volt grade complete all as specified and directed.
66Material and Labour for repairing of leakage / cleaning of CI/DI main distribution pipe line upto 300 mm dia cutting or opening at any location , with the help of machine / manually to repairing the leakage or blockage of main pipe line and reconnecting the pipe after repair complete all as specified and directed by engr -in-Charge. Note :- Fitting and jointing material such as lead /flanged /rubber joint and excavation returning filling etc will be included in the quoted rate.
67Dismantling and taking up or down unserviceable / old water pipe/tubing any type including all fittings etc complete all as specified and directed of the following sizes:-.(a) 50/80 mm dia
68(b) 20/25 mm dia.
69S & F in replacement 80 mm GI pipe medium grade inclduing all fittings such as bend, tee, elbow, union, reducer etc, fixed complete on wall / surface / floor including MS hooks / clamps of suitable size including taking out old and U/s complete all as specified and directed.
70All as per item herein above but for 50 mm bore omplete all as specified and directed.
71All as per item herein above but for 25 mm bore omplete all as specified and directed.
72Taking up old CI/DI water mains pipe line (including all fittings), with spigot and socket ends and lead joints including buring out joints and recovering lead of the following sizes :-(a) 150 mm dia.
73(b) 200 mm dia.
74(c) 250 mm dia.
75Supply, laying, jointing and testing of Ductile iron (DI) pipes 250 mm bore with spigot and socket ends, centrifugally cast, class K-7/9 as per IS:8329-2000 and other relevant standards including material and labour for push on EPDM/SBR Rubber gasket joint in any length laid in trenches including taking out old u/s pipe any type complete all as specified and directed. Note :- DI fittings and earth work will be measured and paid under relavant item of this schedule.
76Ditto as per above item but 200 mm bore omplete all as specified and directed.
77Ditto as per above item but 150 mm bore omplete all as specified and directed.
78Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth in any type of soil and getting out for removing / laying of pipe lines omplete all as specified and directed.
79Returning and filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.
80Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.
81M & L for CI/DI bends, tapers, Tee pieces, cross, collers, caps and plugs any type, radius & angle for pipes upto 150 mm bore complete all as specified and directed.
82M & L for CI/DI bends, tapers, Tee pieces, cross, collers, caps and plugs any type, radius & angle for pipes 150 to 300 mm bore complete all as specified and directed.
83S & F in repair/replacement steel wire rope (SWR) 20 mm dia with PVC coated complete all as specified and directed.
84S & F in repair/replacement sluice valve class PN 1.6 with brass spindle, gasket, bolts, nuts and washers in position of 250 mm bore in valve pit chambers or near to bore well including taking out old u/s complete all as specified and directed.
85All as per item herein above but for 200 mm dia omplete all as specified and directed.
86All as per item herein above but for 150 mm dia omplete all as specified and directed.
87All as per item herein above but for 100 mm dia omplete all as specified and directed.
88All as per item herein above but for 80 mm dia omplete all as specified and directed.
89S & F in repair/replacement Non return valve vertical/horizontal type (Suitable as per existing valve) with gasket bolts, nuts and washers in position of 250 mm bore in IRP supply and delivery omplete all as specified and directed.
90All as per item herein above but for 200 mm bore omplete all as specified and directed.
91Materials and Labour for opening up stuffing box of cast iron sluice valve in position, repair/replacement of gland packing, nuts, bolts and washers etc with existing size complete all as directed for the following sizes :-(a) 250 mm Bore
92(b) 200 mm Bore
93(c) 150 mm Bore
94(d) 100 mm Bore
95(d) 80 mm Bore
96M&L for construction of valve chamber in replacement 1200 x 1200 x 1200 mm internal dimensions, 3 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40mm x 40mm x 5 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6), 230 mm thick, PCC bed (1:4:8) type D2 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces including demolation/ dismantling and removal of old unserviceble valve pit (Rate of demolation and removal of old unserviceble item is included in quoted rate) complete all as specified and directed.
97S & F in repair/replacement MCCB 400 Amp, FP, 415V, 50Hz, 36 KA confirming to IS/IEC 60947-2 thermal magnetic adjustable with over load 80-100% & short circuit protection 5-10 Incomplete all as specified and directed.
98S & F in repair/replacement MCCB 250 Amp, FP, 415V, 50Hz, 36 KA confirming to IS/IEC 60947-2 thermal magnetic adjustable with over load 80-100% & short circuit protection 5-10 In complete all as specified and directed.
99S & F in repair/replacement MCCB 200 Amps, FP, 415V, 50Hz, 36 KA confirming to IS/IEC 60947-2 thermal magnetic adjustable with over load 80-100% & short circuit protection 5-10 In type complete all as specified and directed.
100S & F in repair/replacement MCCB 160 Amps, FP, 415V, 50Hz, 25 KA confirming to IS/IEC 60947-2 thermal magnetic adjustable with over load 80-100% & short circuit protection 5-10 In type complete all as specified and directed.
101M&L for PCC 1:4:8 Type D2 (40mm graded) in foundations, filling and mass concrete complete all as specified and directed.
102M & L for PCC 1:3:6, type C-2, (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
103Supply , laying , testing and connecting LT UG cables 240 Sqmm x 3.5 core , 1100 Volt grade XLPE insulated and PVC sheathed, armoured, with multi stranded aluminium conductor, heavy duty confirming to IS - 1554 part-I, including cable glands, cable lugs in LT panel/ FP Box etc including material and labour for all jointing/ connecting material as required, cables laid in trenches/ ducts/under plinth floors passing through pipes etc, for following sizes:
104All as per item herein above but size 95 sqmm 3.5 core complete all as specified and directed.
105All as per item herein above but size 35 sqmm 3.5 core complete all as specified and directed.
106Supplying and laying of DWC pipe along with all accessories etc in trench/open, for LT UG cable protection complete as required of complete all as specified and directed for following bore size (a) bore size 80mm
107(b) 50 mm bore
108Supply, install, testing & commissioning LT Starter Panel, In-door Type of suitable size so as to accommodate the following accesoris, depth not less than 500mm, factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & high grade Copper bus-bar wrapped with coloured PVC tape /sleeves of rating in conformity to the Incoming ACB/MCCB rating. The panel board shall be fabricated 2.00 mm thick CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Phase, 4 wire system 415 /440 volts grade including complete internal wiring with not less than 2.5 Sqmm copper wire including cable glands of suitable sizes with suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv LT Starter panel of any size/type complete all as specified & as directed with & including the following accessories :
109(Jack well Pump House)(i) BUS-BAR & INTERNAL CONNECTIONS :The bus-bars shall be made up of 04 Nos high grade Copper 1200 Amps rated, duly insulated with 1100 Volts grade standard colour coded PVC sleeves & rigidly mounted on suitable sized \\"F\\" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc.PROVISION FOR CABLE ENTRY :The provision for cable entry /exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes.INCOMING :(a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 50 KA & of rating 500 to 630A - 01 Nos. Make : L & T/ Legrand /Siemens.
110OUTGOINGS :(a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 250 Amps - 02 Nos. Make : L & T, / Legrand /Siemens. (b) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 100 to 125 A - 02 No. Make : L & T/ Legrand /Siemens.(c) Fully Automatic Star Delta (FASD) Starter /ML- 6, 3 phase, 415 Volt , 50 HZ, relay range 57- 66 Amp - 02 Nos. Make : L & T/ Legrand /Siemens.(d) Fully Automatic Star Delta (FASD) Starter /ML-2, 3 phase, 415 Volt , 50 HZ, relay range 13- 18 Amp - 02 Nos. Make : L & T/ Legrand /Siemens.(e) Phase preventer 3 phase, 415 Volt/440 Volt AC -01 Nos (f) Over load relay -01 Nos
111INSTRUMENTATION SYSTEM :(a) Digital type Multi-Function meter with built in selector Switch & 03 Nos CTs matching with the I/C breaker, Accuracy Class - 1.0, 3 phase, Size 96 x 96 mm. Make : L & T/ Legrand /Siemens.(b) Indicator lamp with integral circuit (230/240 Volts) & cluster LED (Red, Orange, Blue) - 01 Set. (c) Danger notice plate of size 20 x 15 cm of 1.6mm thick mild-steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal-red colour and fixed with MS clamps, bolts and nuts of approved size, for LT conforming to IS-2551 - 01 Nos (Front ) Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58343871
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 35 Lakhs
LAST DATE 24-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/ Maintenance Of Submersible Centrifugal/ Monoblock Pumpset, Starter, Cleaning Of Water Reservoir/ Sump, Changing Of Filter Media And Certain Allied Works At Diat (Du) And Milit Girinagar Pune- 25
Basic Detail
Tender No GE I R AND D GNR TOKEN 22 OF 2026-27(8010)
Bidding Type Tender
Location
City Pune
State Maharashtra
Key Dates
Publish Date 17 Nov 2026
Submission Date 24 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 35 Lakhs
Tender Fee 500
EMD 70000
Exemption Available
Document List
4a4bd3dc-c1d9-4478-8868-08015e5ea715.html
BOQ_892251.xls
TENDERDOCUMENTS.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 24, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 2 days
Nov 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

4a4bd3dc-c1d9-4478-8868-08015e5ea715.html

xls

BOQ_892251.xls

pdf

TENDERDOCUMENTS.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender