Tender For Repair And Maintenance Of Ct At Sadachayee Mutt Street - Ward No.43 In Kumbakonam City Municipal Corporation.
Tender Value
4.90 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
14 days left
EMD
4900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thanjavur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Ct At Sadachayee Mutt Street - Ward No.43 In Kumbakonam City Municipal Corporation.
BOQ
| Sl. No. | Item Description |
| 1 | Brick Work in Cement Mortar 1:5 mix using country bricks of size 8¾ x 4¼ x 2¾ foundation etc., complete. |
| 2 | Foundation & Basement |
| 3 | Special Ceiling Plastering for RCC slabs and beams with cement mortar 1:3 mix 10mm thick including hacking etc., complete |
| 4 | Weathering course with concrete broken brick jelly 20mm size in pure slaked lime (no sand to be used) over RCC roof slab the proportion of broken brick jelly to lime being 32:12.5 well beaten with wooden beaters giving to required slope and thickness etc., complete |
| 5 | Finishing the top with one coarse of pressed tiles of size 20cm x 20cm x 20cm thick laid in C.M 1:3 mix with water proofing compound as per Indian std specification 2% weight of cement and pointing with same mortar etc ., complete. |
| 6 | Paving the floor Wth design antiskid ceramic tiles (colour and shade as directed) of size 305mm x 305 mm x 6mm in all floor aver a base layer of cement mortar 1:3 (one cement and three sand) 20 mm thick laid in situ and pointed with same coloured cement. |
| 7 | Dadooing and skirting the walls with white or colour glazed tiles of size 15 cm x 15cm x 6mm laid in cement mortar 1:2 mix 10mm thick and pointing with white cement using 0.40 Kg/m2 incluidng finishing the joint and pointing flush with tiles surface etc., complete |
| 8 | Supply and fixing in position of white glazed indian oriya type water closet 580 x 440mm size white glazed earthernware of approved quality with S or P trap confirming to IS: 2556-part XII with sand cusion and forming flooring around the closet using 40mm broaken brick jelly in lime concrete 1:4:8 mix, 100mm thick using 20mm ISS gauge brick jelly and finished the top to required slop and including giving necessary connection to cast iron soil pipes by dismantling brick masonry, RCC/ floor slab and making good of the disturbed portion to original condition without leakage etc. complete complying with std. specifications and as directed by dept. officers etc.complete. |
| 9 | Supply and fixing of wash hand basin, without pedestral, 15mm dia GM value, 32mm dia CP Waste, 32mm dia PVC waste pipe, 15mm dia brass nipple, 12/15 mm dia CP pillar tap, 15mm nylon connection, Plug and chain, CI Brackets including fixing the wash hand basin in the wall in position wiht a pair of CI bracket with teak wood plugs adn screws adn giving necesary water supply connection and painting the brackets with 2 coats of paint over a priming coat of anticorrosive paint including testing for leakage etc.,complete |
| 10 | Supply, fabricating & fixing in position of M.S door of size 0..90 x 2.10m. The outer frame will be 25 x 25 x 3mm angle, the side frame with outer bars and M.S Sheets 1.60mm thick 20gauge MS sheet with necessary hinges, tower bolt, aldrop length 30mm and hold fast etc., complete complying with standard specifications. |
| 11 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work |
| 12 | Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch boc 5A F.T. switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable color for concealed PVC light / fan point (for elctronic regulator) SD-24. |
| 13 | Wiring with 2X 1.5 sqmm (22/0.3) PVC insulated Sc unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150x100x113mm TW switch box and 5A 3 pin non inter locking CS plug with painting of suitable color with continuous earth wire connection of 14SWG TC wire for concealed PVC plug point ( SD-38) |
| 14 | Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15 A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire , and making good of the concealed portion, with suitable colour for concealed power plug point (SD.No.40) |
| 15 | Supply and run of 2 of 6 sq.mm (84/0.3) PVC insulated SC unsheathes Cu. Conductor of 1100 V grade in 25mm dia GI pipe (Class B) bent at both ends with necessary angle iron up right and end suports for mains (SD 66) |
| 16 | Supply and fixing of WT bulkhead fitting with guard (Philips/Bajaj/Crompton/K-Lite)suitable for 11WCFL lamp with CFL etc., complete. S.D.no:83 |
| 17 | Painting 2 coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curino etc.. complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender