Tender For Providing Granite Top Work Bench To The Botany Department In Bharathiar University, Coimbatore.
Tender Value
2.69 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
9 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Granite Top Work Bench To The Botany Department In Bharathiar University, Coimbatore.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls |
| 2 | Brick / stone masonry in Cement mortar walls under 3m high |
| 3 | Floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slabs |
| 4 | Brick partition walls of 11.50cm thickness using best quality Fly ash brick of size230x110x70mm in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the UNiversity Engineer . (Hoop iron reinforcement will be measured and paid for separately) |
| 5 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29m height for plane surfaces as detailed below in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.5cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at not more than 75cm centre to centre etc., complete complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) |
| 6 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 7 | Cement Concrete 1:2:4 (One Cement, two crushed stone sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the University Engineer. |
| 8 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the University Engineer. |
| 9 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the University Engineer. |
| 10 | Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the University Engineer concerned before use on work, etc., complete as per standard speicification. |
| 11 | Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a silicon Adhesive sealent with mixer of epoxy gel and resin. The granite stone slabs and other materials to be used shall be got approved by the University Engineer concerned before use on work, etc., complete as per standard speicification. |
| 12 | Paving the floor with fine polished cuddapah stone slab of 20/30mm thickness over Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick over the existing bed of Cement Concrete 1:5:10, (One Cement, Five Sand and Ten aggregate) and pointing the joints to full depth of slabs with same mortar mixed with black oxide and the top surface rendered smooth, curing, etc., The cuddapah stone slabs and other materials to be used shall be got approved by the University Engineer concerned before use on work, etc., complete complying with standard specification. |
| 13 | Providing double Nosing to the fine polished Granite Stone slab of approved quality and best variety complete complying with standard specification |
| 14 | Providing and fixing cupboard shutters with frame using 19 mm termite- and waterproof plywood, finished with 1.0 mm decorative laminate on the outer face and 0.8 mm laminate on the inner face, bonded with approved adhesive. The shutters shall be complete with hydraulic hinges, tower bolts, handles, multipurpose locks, and all necessary fittings and fixtures. The design, plywood, laminate, and all materials shall be approved by the Executive Engineer before execution. The item includes all materials, labour, fixing, and finishing, complete as directed by the University Engineer. |
| 15 | Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the University Engineer before use of work). |
| 16 | GST @ 18% 45.0 23 23 544.0 23 23 12.0 23 23 14.0 23 23 21.0 23 23 12.0 23 23 12.0 23 23 12.0 23 23 12.0 23 23 12.0 23 23 357.0 23 23 25.0 23 23 254.0 23 23 24.0 23 23 1356.0 244.08 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender