Tender For Up Gradation And Improvement Of R&B Sub Divisional Office Devsar
Tender Value
6.86 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
19 days left
EMD
13720
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kulgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Up Gradation And Improvement Of R&B Sub Divisional Office Devsar
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 2 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:4:8 or leaner mix (i/c equivalent design mix) |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area of 3 sqm. and below |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 5 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 6 | Dismantling wooden boardings in lining of walls and partitions excluding supporting members but including stacking with 50 mtr lead |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) incld: all carriages |
| 8 | Providing and laying anti-skid vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 9 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in above plinth level upto floor V level including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) incld: all carriages : |
| 10 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand) incld: all carriages |
| 11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 12 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 13 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Chaar Gul |
| 14 | Providing and fixing of 10 mm plywood board of IS specifications for khatambandi ceiling/wall panelling including cost of all accessories, complete job |
| 15 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position Budloo / Fir wood |
| 16 | Analysis Providing and fixing of imported wood panelling [RAIT WOOD] premium quality, over 12mm thick full ply base work including all kinds of fixtures, enclosed cornices, fevcoal and french split polish complete job |
| 17 | WOODEN FLOORING Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: Second class deodar wood 12MM thick |
| 18 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately); imported wood |
| 19 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, imported German /Russian with all kinds of fixtures |
| 20 | Sanitary Fitting |
| 21 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. |
| 22 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Long pattern W.C Pan of size 580x440 n |
| 23 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 24 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 25 | Providing and fixing jaguar or equilavant made 15 mm dia cp brass basin mixer J |
| 26 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 27 | Providing and fixing toilet paper holder C.P. brass of approved brand |
| 28 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. of approved brand |
| 29 | Providing and fixing health faucet with hose pipe for european water closet complete in all respect of approved quality (hindware) |
| 30 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. |
| 31 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 as directed |
| 32 | Providing and fixing 15 mm nominal bore C.P. wall mixer of approved make conforming to IS : 8931 |
| 33 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 34 | Providing/fixing ball valve (Brass) of approved quality High or low pressure with plastic float complete 25mm nominal bore |
| 35 | Providing and fixing unplasticized PVC connection pipe with brass unions 45 cm length 15 mm nominal bore |
| 36 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. |
| 37 | PN-16 pipe, 25mm OD(SDR-7.4) |
| 38 | PN-16 pipe, 40mm OD(SDR-7.4) |
| 39 | Providing and fixing of floor traps 110 mm with double chrome plated cover one grated and one closed and all other fittings required |
| 40 | Providing and fixing testing and commissioning PVC SWR pipes jointed with approved solvent cement fixed to walls and ceilings including angle supports with clamps complete including cutting holes in rcc brick work and making good the floors beams, and walls cement mortar where required complete of outer diameter. Type-B |
| 41 | 100mm P.V.C. pipe |
| 42 | 75 P.V.C. pipe |
| 43 | Collar diff dia |
| 44 | Bend diff dia |
| 45 | P.V.C Tee Diff dia |
| 46 | P.V.C Reducer Diff dia |
| 47 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete. (32 mm nominal bore) |
| 48 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 49 | supplying installing fixing of premium quality blind curtains for windows , with curtain roads as desired by engineer in charge along with all kinds of fixtures Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender