Tender For Providing And Laying Tiling And Maintenance Work To Swimming Pool And Washrooms At Calangute Residency
Tender Value
10.58 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
7 days left
EMD
21180
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
panaji → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing And Laying Tiling And Maintenance Work To Swimming Pool And Washrooms At Calangute Residency
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the tile work in floors and dados laid in cement in swimming pool walls floorswith precaution to safegaurdwater proofing layer5s and including disposing off waste materials out of city limits . |
| 2 | 20mm cement plaster 1: 4 (1 cement : 4 coarse sand) |
| 3 | Cleaning the surface and filling cracks (if any), applying epoxy putty wherever necessary, Providing and applying 3 coats of High performance moisture compatible corrosion resistant Food grade non toxic epoxy stearate coating (WATERSEAL) having impermeable film withstanding to hydrostatic pressure up to 5 kg/cm2 with a DFT of 250 microns on the prepared RCC surface. If there is honey combing or excessive unevenness in the surface then 10mm plaster in CM 1:3 should be applied on the entire surface followed by application of 2 coats of WATERSEAL with a DFT of 150 microns. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent. |
| 4 | Providing and fixing in position Glass mossaic tiles at finished plain/flat/curved/inclided surface of size 10-50 mm square x 4 mm in all colour, design, fixing in customize design as per direction of Engineer. The glass mosaic tiles to be fixed on the surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer. |
| 5 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab. a) Jet Black |
| 6 | Providing and fixing PVC Blue Swimming Pool Gratings, For Cleaning Purpose, Size: 12 Inch |
| 7 | Bluewave Swimming Pool Ladder for In Ground Pools | Heavy Duty Stainless Steel Pool Step Ladder with Easy Mount Legs 304, 4 Steps |
| 8 | Dismantling the tile work in floors and roofs laid in cement including stacking of materials within50 meters lead for thickness of tiles 10mm to 25mm.(FOR WASHROOMS) |
| 9 | Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. i) SCH-40(blue)/(white) a)20mm outer dia. |
| 10 | Providing and and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete d) 900 x 900 mm light Shades |
| 11 | Single Colour Foam Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wood styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) . The core of shutter will be filled as specified (Expanded Polystyrene Foam / Polyurethane Foam (EPS/PU) Foam). The shutter to be of single colour & water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory. Accessories: i) S. S. Hinges 4” - 3 Nos ii) S. S. Latch - 1 No iii) Tower Bolt 5” - 2 Nos iv) Handle 5” - 2 Nos Shutter Thickness : a) 30mm |
| 12 | Painting one or more coats of acryllic exterior paint of approved brand and manufacture(Such as Dulex/ Asian Paints/ Sherwin Willians) on old work including cleaning the surface with water etc.complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender