Housing Urban and Rular Development Government Departments Closing in 1 days TDR #58341377

Widening And Strengthening Of The Haldharpur Gahni Gahna Road (Chainage 0.00 To 4.800 Km) In Mau District (Including 5-Year Maintenance Costs)

Issued by Government Departments · Mau, Uttar Pradesh
Tender Value
7.42 Crore
Estimated cost
Bid Submission
20 Nov 2026
1 days left
EMD
14.85 Lakhs
Bank guarantee accepted
Document Fee
5590
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mau → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Widening And Strengthening Of The Haldharpur Gahni Gahna Road (Chainage 0.00 To 4.800 Km) In Mau District (Including 5-Year Maintenance Costs)

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 06-Nov-2026 Date Corrigendum Date 20-Nov-2026

BOQ

Name of Work:- tuin eÅ esa gyèkjiqj xguh&xguk ¼pSust 0-000 ls 4-800 fd-eh-½ ekxZ ds pkSM+hdj.k ,oa lq–<+hdj.k dk dk;ZA ¼5okhZ; vuqj{k.k ykxr lfgr½ (As per Bill of Quantity)
Sl. No. Item Description
1Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m .As per Morth Spe. 3.6 /301
2Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structure graded and compacted to meet requirment of table 300-2 .As per Morth Spe. 3.17 /305
3Construction of sub grade and earthen shoulder with approved material obtained from borrow pits with all lift and leads transporting to site up to 1.00 km, spreading grading to required slopes and compacted to meet requirement of Table-300-2 .As per Morth Spe. 3.18 /305
4Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead upto 1000 meters .As per Morth Spe.. 305.4.3/3.15
5Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000 m.. As per Morth Spe. 301/3.6
6Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.A per Morth.spection 4.1/401
7Cement Treated Base (CTB)Providing, laying and spreading of graded stone aggregate (WMM) after mixing with 4% portland cement with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform single layer with paver as cemented base on sub base/subgrade( modified soil) and compacting with the road roller to achieve unconfined compressive strength as specified by Engr-in-charg
8Providing , laying , spreding and compacting graded stone aggregate to wet mix macadam specification including preixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers with paver in sub base / base couse on well prepared surface and compacting with vibratory roller to achieve the disired density . . .As per Morth Spe. 4.14 /406
9Providing and applying prime coat with bitumien emulsion on prepared surface of granular Base inlcuding clearing of road surface and spraying primer at the rate of 0.70kg/sqm using mechinical means .
10Providing and laying bituminous concrete with 120 TPH batch type hot mix plant producing an avarage output of 75 tonne per hour using crushed aggregates of specified grading premixed with bituminous binder @ 5.4 percent of mix and filler , transporting the hot mix to work site , laying with hydostatic paver finisher with sensor control to the required grade , level and aligmnment , rolling with smooth wheeled , vibratory and tendom roller to achieve the desired compaction as per MoRT&H Specification Clause 5.50/ 507 complete in all respects.
11Excavation in foundation in ordinary soil including lift upto 1.5M. and lead upto 30M. including watering ramming and dressing etc. and disposal of surplus earth as direction by E/I. upto a distance of 30M. from the foundation trenches complete in all respect.
12PC.C. 1:3:6 cement, coarse sand 40mm. Gauge stone ballast including complete work
13Supply of 600mm. Dia pipe.
14Supply of Coller
15Laying of 600mm. Dia pipe.
16M-150 brick work in 1:3 cement and coarse sand mortar in foundation and plinth etc. required for proper completion of the work
17Struck cement pointing in 1:3 cement fine sand mortar including supply of all materials labour tools and plants etc. required for proper completion of the work.(Flus Pointing)
1812 mm thick Plaster with Cement mortor in proportion of 1:2 cement and Coarse sand .
19Painting Roofs or others work in one coat coat of ready mixed paint primer one coat coat of appproved paint(british ,Antisol) including supply of all materials laboure tools and plantsetx required for proper complition of the work As per direction of E/I. SI N0 04
20Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. (PCC Grade M15) 1500, 1700 & 2100
21Colour washing one coat using approved colouring materials of buff,blue,gray or broun shade including supply of all materials labour tools and plants etc. required for proper completion of the work.
22Constn. Of subgrade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000m. As per
23Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material
24Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15
25R.C.C ( M-25 Grade)
26Supplying, fitting, and placing MS bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202, for Bars below 36 mm dia including over laps and wastage, where they are not welded.
27Cantiliver Board 6M Span over head Cantilever Structure with 300 dia M S one vertical postSupply, fixing & eraction of built up Cantilever Structure 6 m span comprising of one vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shall comprise of 50 mm dia heavy class M.S. pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 0.90×0.90x1.50 m of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean Concrete in 1:3:6 cement coarse sand and 40 mm gauge stone ballast and RCC-M25 grade concrete including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2010complete in all respect The Rates shall include cost of design fabrication, supply, transportation. Local shifting Erection of Signage structure using crane, inclusive of all taxes etc. all T&P machine. material and labour required for proper completion of work as per direction of Engineer-in-charge .
28Informetri Board Providing and fixing of reflective signs with a corrosion resistsnt 4 mm thick aluminium complete panel face to fully covered with high intensity prismatic sheeting type -iv AS PER IRC-67-2010 Retro reflective sheeting with MS angle frame of 35x3.
29Caution Board Providing and erecting direction and place identification retro reflectorized sign as per IRC-67 made of high intensity grade sheeting vide clause 800.1 fixed over aluminium sheeting 2 mm thick over area not exceeding 0.9 sqm supported on mild steel angle iron post 75x75x6 mm firmly fixed to the arround by means of properly designed foundation with M15 grade cement concrete 45x45x60 mm below ground level as per approved drawing complete 90x90 cm (Triangular Board)
30Stop Board
31Hazard Board
32Circular Board
33Chevron (Single )
34Retro-Reflective sheeting type IV with 4 mm thick ACM double side Providing and fixing of reflective signs with a corrosion resistsnt 4 mm thick with 0.4 to 0.5 mm both side aluminium complete panel face to fully covered with high intensity prismatic sheeting type -iv AS PER IRC-67-2010 Retro reflective sheeting with MS angle frame of 35x35x3 back frame etc all completea As MORTH 801 Specification.
35Thermoplastic painting Road marking with Hot Applied Thermpplasic compound with Reflectorsing glass Beads on bituminous surface. Providing and laying of hot applied thermo plastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass bed as perIRC 35 inclduing cost of all materials , labour , Machinaries , T&P etc. requared for peoper completion of work i/c all other charges and taxes . The finishied surface to be level uniform and free from streks and holes as per MORTH specification no. 803
36Delinators Supplying and installation of delinators (road way indicators, hazard markers, object marker) 80-100 cm high above ground lavel , panted balck and white in 15 cm wide strips fitting with 80x100 mm rectangular or 75mm dia circular reflactorised panal at the top buried or pressed into the ground and conforming to IRC:79 and the drawing
37Road marking with hot applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Transverse Bar /Repeated) P/L hot appiled thermoplastic compound 5 mm thick, including reflectorising glass @ 250 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC: 35-2015 the finished surface to be level, uniform and free from streak and holes As per direction of E/I.
38Reflective Raised Pavement Markers (Road studs Cat Eye) Supply and fixing of reflective raised pavement as per SI No. 804.(with Shank) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58341377
AUTHORITY Government Departments
TENDER VALUE 7.42 Crore
LAST DATE 20-11-2026
Authority
Authority Name Public Works Department
Work Description Widening And Strengthening Of The Haldharpur Gahni Gahna Road (Chainage 0.00 To 4.800 Km) In Mau District (Including 5-Year Maintenance Costs)
Basic Detail
Tender No 4383/NIVIDA(PD MAU)-BALLIA CIRCLE/2026 Date- 03.10.2026
Bidding Type Tender
Location
City Mau
State Uttar Pradesh
Key Dates
Publish Date 06 Nov 2026
Submission Date 20 Nov 2026
Open Date 20 Nov 2026
Finance
Tender Value 7.42 Crore
Tender Fee 5590
EMD 14.85 Lakhs
Exemption Not Available
Document List
ADDENDUMPDA.pdf
BOQ_2279788.xls
faa5bd5c-a4ad-414e-b1ca-7f4f7e684bc9.html
SBD1.pdf
SBD2.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 20, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 1 day
Nov 20, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Nov 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
pdf

ADDENDUMPDA.pdf

xls

BOQ_2279788.xls

html

faa5bd5c-a4ad-414e-b1ca-7f4f7e684bc9.html

pdf

SBD1.pdf

pdf

SBD2.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender