Tender For Installation And Energisation Of Antarjholi-V Tw Lift Irrigation Project Under Ramanaguda Block Of Rayagada District.
Tender Value
18.09 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
7 days left
EMD
18099
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rayagada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation And Energisation Of Antarjholi-V Tw Lift Irrigation Project Under Ramanaguda Block Of Rayagada District.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 31-Oct-2026 | In partial modification of term and Condition and Deletion of DTH / Mud Rotary Rig Joint Venture conditions | Terms and Conditions | 12-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge. |
| 2 | Earth work excavation in hard soil such as hard stiff clay,stiff blackcotton,hard red earth,shales,moorum ordinary gravels within 50 mtr.initial lead and 1.50 mtr.initial lift including rough dressing and breakingclods and stacking rubble or spreading and levelling within the site as the case may be etc. |
| 3 | Filling foundation and plinth with excavated materials in layers not exceeding 0.30 m. including breaking clods within 50 m.initial lead levelling the trenches as the case may be etc.complete(Quantity by means of Mechanical 60% & manually 40 % i.e. of respective item) |
| 4 | Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-incharge. |
| 5 | Cement concrete (1:4:8) with 4cm size h.g.c.b. metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. complete as per the direction of the Engineer-incharge. |
| 6 | Brick work with K.B. Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-incharge. |
| 7 | Brick work with K.B. Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in super structure complete as per the Engineer-incharge. |
| 8 | 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 9 | Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge.(a) RCC ROOF SLAB AND CHAJJA |
| 10 | (b) RCC LINTEL |
| 11 | .(c) RCC FOUNDATION & PLINTH BEND,FOOTING,BADE OF COLUMN. |
| 12 | (d) RCC PILLAR |
| 13 | R.C.C. work in C.C. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 14 | Labour charge for M.S. reinforcement for R.C.C. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. Including cost of HYSD Still Bar (FE 415/ FE 500) |
| 15 | Dry Brick Khoa rammed to 10 cm. In Flooring. |
| 16 | 2.5 cm. AS flooring with Cement Concrete (1:2:4) with 12 mm. size HG chips with cement punning |
| 17 | Labour for fitting & fixing of MS Window grills including cost of screws complete |
| 18 | Labour for fitting & fixing of MS Door including cost of all materials complete |
| 19 | Cost of MS grill for Window |
| 20 | Cost of Iron Shutter (2.00 x 1.00) |
| 21 | Cement punning over plastering including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 22 | Filling the foundation and plinth with excavated material as directed by the Engineer-incharge. |
| 23 | White washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the Engineer-incharge. |
| 24 | Colour Washing 3 coats with shell lime and colouring materials |
| 25 | Finishing wall with water proofing cement paints two coats for exterior walls |
| 26 | Priming 1 coats with approved primer on new work. |
| 27 | Painting of MS Door of Starter shed by enamel paint of approved quality and colour for painting over iron work including cost taxes etc. complete as per the direction of the Engineer-incharge. |
| 28 | Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge. |
| 29 | Supplying all materials, labour, T&P for jointing of 160 mm outer dia High Density Polythylene Pipes of specified material grade & pressure rating by butt fusion welding method as per speciication & laying in tranches including testing including all cost and transportation from nearest approved manufacturing units as listed in EPM rate contract to site etc complete as per direction of the Engineer-in-charge |
| 30 | Cost of Outlet in Distribution Tank |
| 31 | Labour charges for Lowering of 5.00 HP S/S Motor including fitting & fixing of suction and delivery pipe to motor, NR Valve, Sluice Valve and other fitting materials including cutting, welding etc. complete as per the direction of the Engineer-incharge. |
| 32 | Fabrication works,cutting & threading of pipe line etc. |
| 33 | Labour charges for connection of main switch to starter and starter to motor with connection of other electrical fittings etc. complete as per direction of the Engineer-incharge. |
| 34 | Transportation charges of materials including loading, unloading and stacking properly as per the direction of the Engineer-incharge. |
| 35 | Cost of 0.90 X 1.37 Mt. iron Gate including fitting & transportation for electrical sub-station boundary |
| 36 | Spreading of 20 mm.size hg metal and sand inside the electrical sub-station boundary ( 2.60 x2.60 mt.) |
| 37 | Cost of 5.00 HP S/S pump set having discharge of 840 LPM. |
| 38 | Control Panel with S/D Starter with MCB |
| 39 | Cost of 32 Amp.400 Volt TP Main Switch |
| 40 | 3 KVR Capacitor |
| 41 | Cost of 3 x 10mm2 T.D.Cable |
| 42 | 2.50 mm2 submersible 3 core flat cable with ISI mark |
| 43 | 7/20 PVC Wire |
| 44 | Cost of 80 mm dia G.I. Pipe |
| 45 | Cost of 100 mm dia G.I. Pipe |
| 46 | Cost of 80 mm dia G.I. Bend |
| 47 | Cost of 100 mm dia G.I. Bend |
| 48 | Cost of 100 mm dia G.I. Flange |
| 49 | Cost of 80 X 100 mm dia G.I. Reducer |
| 50 | Cost of 100 mm dia G.I. Nipple |
| 51 | Cost of 100 mm dia C.I.Reflux Valve (N.R.) |
| 52 | Cost of 100 mm dia C.I.Sluice Valve |
| 53 | Cost of 80 mm dia M.S.Clamp |
| 54 | Cost of 50 mm dia Air Release Valve with saddle & Raiser Pipe |
| 55 | Cost of 12 mm.dia Wire Rope |
| 56 | Cost of MS clamp for Starter & Main switch |
| 57 | Cost of 200 mm x 100 mm MS T/W Cap |
| 58 | Cost of 160 x 110 mm G.I. Reducer |
| 59 | Labour charges for delivery fittings including fitting of Air Release Valve and PVC Tee etc. |
| 60 | Cost nut bolt & Rubber insertion,whitelead paint and transportation of pipes,pump and other fitting materials |
| 61 | Cost of 300 mm.dia RCC T/W Protection Coverstand |
| 62 | Cost of 160 mm dia HDPE Pipe PE-80 PN-4 |
| 63 | Cost of 160 mm.Butterfly Valve |
| 64 | Cost of 160 mm x 160mm x 100 mm MS TEE with accessories |
| 65 | Cost of 160mm x 160mm x 160 mm Equal HDPE Tee spigot design 6 kg. |
| 66 | Cost of 160 mm dia HDPE End Cap spigot design 6 kg. |
| 67 | Cost of 160 mm HDPE Tail piece160 mm. long spigot design 6 kg. |
| 68 | Cost of 160 mm slipon flange |
| 69 | Cost of 160 mm blind flange |
| 70 | COST OF 200MM DIA PVC CASING PIPE ( SC.80.PIPE )AS PER EPM RATE CONTRACT. |
| 71 | LABOUR CHARGES FOR MAKING STAINER PIPE OUT OF TOTAL CASING PIPES INCLUDING LOADING AND UNLOADING & TRANSPORTATION. |
| 72 | COST OF 200MM DIA PVC WELL CAP. |
| 73 | COST OF 200MM DIA PVC CONE. |
| 74 | COST OF 200MM DIA PVC NIPPLE. |
| 75 | COST OF BENTONITE DRILLING MUD. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 12, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender