Tender For Replacement / Revamping Of Borewells At Avnl Hvf Estate
Tender Value
42.79 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
10 days left
EMD
86000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement / Revamping Of Borewells At Avnl Hvf Estate
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Nov-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-Dec-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Removing of PVC/G.I pipes from bore wells. Any class of 40 to 50 mm (including all fitting) including disconnecting with taking out of submersible pumpsets etc., carefully without any damage. |
| 2 | Cleaning of existing borewell with compressed air inserted in bore of any size to remove the silt/mud deposited inside the borewell and as specified and directed. |
| 3 | Supplying transporting and lowering in raw bore wells PVC NON SLOTTED Casing pipe of size 8 inch inner dia having thickness of 7.6 to 8.8 mm and lowering with vertical alignment including jointing complete. (Make of the pipe shall be - Truebore / Finolex /Aashirvad or suitably equivalent make) are only acceptable. |
| 4 | Supplying transporting and lowering in raw bore wells PVC VERTICAL SLOTTED Casing pipe of size 8 inch inner dia having thickness of 7.6 mm to 8.8 mm and lowering with vertical alignment including jointing complete. (Make of the pipe shall be - Truebore/Finolex/Aashirvad or suitably equivalent make). |
| 5 | M & L For Drilling Bore holes 12 inch dia using power rig in any type of soil etc. and cleaning site after drilling. |
| 6 | Supply and filling of granular space between casting pipe and raw bore with free pebbles of size 6mm to 10mm complete all as specified and directed. |
| 7 | Supplying transporting and lowering and fixing in bore well 50 mm inner dia and 60 mm outer dia of PVC threaded submersible pipe each 10 feet length with joint and wire lock system with pressure rating 20kgf/cm2 (MAKE- FINOLEX / ASHIRVAD/ TRUBORE or suitably equivalent make) |
| 8 | Supply and fixing of 50 mm dia brass non return valves, screwed both ends for HDPE/PVC pipe with all accessories. Note: Brass Non Return Valve + Nipple + Clamp + Welding or (Pipe + MTA/FTA + Valve) required fitting included. Make: Any ISI make. |
| 9 | Supply and Fixing of NYLON rope of 12 mm dia along the PVC bore pipe and tied with motor base for safety of PVC pipes and tied with pvc tags of 5 mm thick each 1 meter of the bore well pipes. Make: Any ISI make. |
| 10 | Supply and fixing of 50 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or pvc with all accessories fitting required. Make should be ISI Heavy duty. |
| 11 | Testing water samples taken from borewell for potability at King Institute, Guindy, Chennai and submit the report in original as per the instruction of EIC. |
| 12 | Finding the borewell samples diviner water point. |
| 13 | Supply, install & commissioning of electric motor driven submersible pumpset multistage AC, 3 Phase, 400/440V, 50Hz with high quality Bronze impeller suction housing with perforated strainer with delivery size 50mm dia, complete with standard necessary accessories (Supreme/Finolex/Ashirvad or suitably equivalent make) flat flexible weather proof PVC sheathed over insulated 3 core 4 sq.mm, 1100V grade from Motor to starter pumping capacity 60 to 70 LPM, Head 75 m, 10 Stage pump of 5 HP motor of (Make: Kirloskar /Texmo / CRI or suitably equivalent make only) with water level sensor, and the size of the motor should be suitable for 6 inches dia bore. |
| 14 | Supply and Fixing of Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 20mm Bore including all fitting. |
| 15 | Earth Work excavation in trenches not exceeding 1.5 m in depth and width and getting out in hard / dense soil. |
| 16 | Returning and refilling of hard / dense soil with well ramming, leveling with excavated soil and spreading at surplus soil. |
| 17 | Material and labour for sand filling in foundation including watering and consolidation. |
| 18 | M & L for P.C.C 1:2:4, B1 type using 20mm graded aggregate for filling of road cuttings (Incl electrical + trenches on crossing of road) |
| 19 | Demolition of unreinforced concrete of any description and in any position not otherwise specifically provided for Cement concrete |
| 20 | Excavating in trenches hard dense soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying cable. |
| 21 | Material & labour for sand filling for cushioning on U.G cable |
| 22 | Materal & labour for Bricks; common burnt clay building bricks sub class B designation 75, Old size bricks for protection to U.G cable |
| 23 | Returing, refilling of hard / dense soil in the excavated trench after laying of power cable including spreading levelling, watering and well ramming in layers not exc 25 cm. |
| 24 | Demolition of unreinforced cement concrete of any description and in any position. |
| 25 | Material and labour for cement concrete 1:2:4 Type B1 using 20mm graded aggregate in foundations, filling and mass concrete. |
| 26 | Supply and laying of PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm, 4 core. |
| 27 | Supply and fixing of Galvanised steel tubes, medium grade 50 mm dia. |
| 28 | Material and labour for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire(7.5 metre length) all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion |
| 29 | Supply and fixing and connecting of the system cable end termination cable size 25 sq. mm, 4 core with suitable cable gland and lugs. |
| 30 | Supply & fixing pillar / wall mounting (as per site requirement) panel 1200 mm X 600 MM X 200mm size of indoor / outdoor type made out of 2mm thick MS sheet including provision 2 coats of red oxide primer and two coats of aluminium paint on surface. The box should have heavy duty hinges and front door should open by using panel key. The box shall be dust and vermin proof. the joints of the box shall be fully welded. the box and door should have the metal beading width of 10mm and 15mm respectively. the rubber / PVC beading should be provided around the box cover for water proof. The box shall be provided with 2 Nos of plain washers and one spring washer with nut at both side of the box shall be provided. the box shall be provided 2 Nos of gland holes suitable for 3.5C, 25sqmm for cable entries for incoming and outgoing. All the power& control wiring shall be the scope of the contractor. the power wiring shall done between TPN main switch to starter and MCCB shall be done with 16 sqmm PVC insulated flexible copper wires/cable with proper lugs. The wiring shall be meatly bunched together with non returnable ties. The panel shall be fitted with functional accessories such as: a) 3 phase, 415 Volts 32 Amps TPN Main switch suitable for operation of above refered pump set(Make: Havells/ Standard/Indo Asian or suitably equivlent make) b) Single phase preventer(MakeL&T, Minilec, Standard or suitably equivlent make) c) Voltmeter 0 to 500 Volts (SIze:96 X 96mm, Make: AE/MECO/RISHAB or suitably equivalent make) with 3 phase selector switch(Make: Salzer/ Switron /Kaycee or suitably equivalent make). d) Ammeter 0 to 30 Amps (SIze:96 X 96mm, Make: AE/MECO/RISHAB or suitably equivalent make) with 3 phase selector switch(Make: Salzer/ Switron /Kaycee or suitably equivalent make). e) Indication lamps (LED integral type - 25mm panel cut) for R, Y, B phases(Make: Teknic/Vaishnov/ Jai balaji or suitably equivalent make) f) Suitable rated DOL starter for above reffered pump set motor with proper O/L relays and contactor (Make: Siemens/BCH/Schneider or suitably Equivalent make). g) Electronic timer(Range: 0 to 60min)(Make:EAPL/L&T/Siemens or suitably equivalent make). h) Dry run protection relay suitable for 3 HP to 10 HPsubmersible pump motor(Make: Minilec/Siemens/BCH or suitably equivalent make) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Dec 01, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender