Tender For Providing & Installation Of Children Play Equipment In Park At Mcd Officer Flat, 14 Number Rajpur Road, Civil Line Zone (North), Under Horticulture Department Mcd.
Tender Value
3.23 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
6 days left
EMD
6500
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing & Installation Of Children Play Equipment In Park At Mcd Officer Flat, 14 Number Rajpur Road, Civil Line Zone (North), Under Horticulture Department Mcd.
BOQ
| Sl. No. | Item Description |
| 1 | PROVIDING & INSTALLATION OF CHILDREN PLAY EQUIPMENT IN PARK AT MCD OFFICER FLAT, 14 NUMBER RAJPUR ROAD, CIVIL LINE ZONE (NORTH), UNDER HORTICULTURE DEPARTMENT MCD. |
| 2 | SUPPLY AND FIXING OF FOUR SEATED MERRY GO ROUND. AREA: 1.5 M. HEIGHT – 0.8 M. SEAT – MOULDED F.R.P. MAIN FRAME: 40 NB G.I. PIPE. BEARING : HEAVY DUTY BEARING. MS PLATE: 250X10MM. SUPPORT PIPE- 80NB. THE TOPCOAT IS DULY POWDER COATED. THE ITEM SHALL BE HAVING ITS MAIN FRAME MADE UP OF 25 & 40. MM NB “B” CLASS G.I. PIPE. THE STAND SHALL BE MADE IN 80 MM NB “B” CLASS G.I. PIPE. THE WHOLE STRUCTURE SHALL BE MOUNTED ON HEAVY DUTY BEARING SHAFT. THE BEARING USED SHALL BE OF HEAVY DUTY BEARING PERMANENTLY LUBRICATED WITH WATER SEALANT. THE SEAT FRAME SHALL BE MADE OUT OF FRP (FIBRE REINFORCED PLASTIC)/LLDPE (LOW LINEAR DENSITY PLOY ETHYLENE). THE SEATS SHALL HAVE HANDRAILS SO THAT THE CHILD DOES NOT FALL. IT SHALL ACCOMMODATE 4 CHILDREN AT A TIME. THE POWDER COATING SHALL BE DONE ON THE PIPES TO AVOID RUSTING. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.) |
| 3 | SUPPLY AND FIXING OF STD. SEE SAWHANDLE :-20 MM N B PIPE. LEVER-32 MM N B PIPE. COLMUN : 60 MM N B PIPE. BEARING : NYLON BUSH PRESS FITTED. SEATS: FRP SEATS WITH STEEL FRAME. THE TOPCOAT IS DULY POWDER COATED. THE LEVEL OF SEE SAW SHALL BE MADE FROM 15, 20 AND 25MM NB B CLASS GI PIPE. THE SEAT OF SEE SAW SHALL BE MADE FROM FRP/LLDPE. THE STAND AND BUSH BEARING MADE IN 40MM NB B CLASS GI PIPE. SEE SAW LEVER SHALL BE WELDED TO 5MM THICKNESS MS PLATE FOR NUT BOLTING WITH STAND. ALL PIPES FLAT SHALL BE POWDER COATED TO AVOID RUSTING. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE)C37C40C41C39 (AS PER DIRECTION OF OFFICER IN CHARGE.) |
| 4 | SUPPLY AND FIXING OF ARCH SWING. LEG SUPPORT : 80 MM NB PIPE, SEAT- ANTI SKID RUBBER BELT. BEARING : HEAVY DUTY BALL BEARING. AREA : 3.0 M X 2.5 M. HEIGHT : 2.5 M. TOP BAR : 60 MM NB PIPE. SUSPENSION : 6 MM RUBBER COATED CHAIN. THE TOPCOAT IS DULY POWDER COATED. IN THIS ONE CHILD CAN ENJOY THE SWING AT ONE TIME. THE ARCH SHAPED SIDE FRAME SHALL BE MADE OF 80MM NB B CLASS GI PIPE SHALL BE MADE UP OF 50MM NB B CLASS GI PIPE. THE FRAME SHALL BE POWDER COATED TO GIVE AN AESTHETIC LOOK. THE SWING SHALL BE MADE UP OF 10MM THICK ANTI SKID RUBBER TOP THE RUBBER BELT SEAT / U SHAPE SWING SEAT WITH 2 EYE BOLT TYB-S06. MADE OF POLYURETHANE OF SIZE：53 X 20.5 X 20 SHALL BE SUSPENDED ON 6MM RUBBER COATED GI CHAIRN. THE BAIL BEARINGS SHALL BE MOUNTED INSIDE A SPECIALLY DESIGNED NYLON CLAMP. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.) |
| 5 | SUPPLY AND FIXING OF FRP BOX SLIDE.LADDER-FRAME-25MM N B PIPE. HANDDRIL-20 MM N B PIPE. SUPPORT-40 MM N B PIPE. AREA : 4.8 M X 0.5 M. PLATFORM HEIGHT : 2.1M. CHUTE :4.0 MM THK F R P. CHUTE LENGTH: 4 M. STEP-WIDTH- 75MM. THREAD 90MM. RISER 250MM. THE MAIN FRAME OF 2.1MTR HEIGHT PLAT-FORM HAVING PIPES ARE OF 40 MM NB B CLASS GI PIPE. THE BOX SLIDE IS OF MATERIAL FRP (FIBRE REINFORCED PLASTIC) WITH ATTRACTIVE BEAUTY COLOUR AND FLAT SURFACE AT END OF SLIDE FOR SAFE LANDING. THE REELING MADE FROM 20 MM NB B WHICH CAN BE USE LIKE HANDLE TO GET A GRIP WHILE START SLIDING. -THE STAIRCASE MADE FROM 25 MM NB B CLASS G.I. PIPE. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.) |
| 6 | SUPPLY AND FIXING OF SPIRAL SLIDE. LADDER-FRAME- 25M M N B PIPE. HANDRAIL - 20 MM N B PIPE. CENTRE SUPPORT- 50 MM N B PIPE. AREA : 2.5 M X3.5 M. PLATFORM HEIGHT : 2.1 M. CHUTE F R P THE TOPCOAT IS DONE USING THE BEST QUALITY BRAND OR DULY POWDER COATED. SPIRAL SLIDE SHALL BE CHUTE MADE OF FRP (FIBER REINFORCED PLASTIC / LLDPE (LOW LINEAR DENSITY POLY ETHYLINE) HAVING THICKNESS OF 4MM SLIDE CENTER SUPPORT SHALL BE 80MM NB B LASS GI PIPE. LANDING MODULE SHALL BE SUPPORTED BY 20MM NB B CLASS GI PIPE. SLIDE EXTENSION PLATFORM SHALL BE MADE FROM FRP / LLDPE. THE RAILING SHALL BE MADE FROM 15MM NB AND 20NN NB B CLASS GI PIPE. ALL PIPES SHALL BE COATED WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.) |
| 7 | SUPPLY AND FIXING OF SIGN BOARDS OF 0.91 X 0.61M SIZE WITH SUPPORT LENGTH OF 3000 MM. MANUFACTURING, SUPPLYING AND FIXING OF RETRO REFLECTIVE SIGN BOARDS MADE OF 2 MM THICK ALUMINUM SHEET FACE TO BE FULLY COVERED WITH HIGH INTENSITY ENCAPSULATED TYPE HEAT ACTIVATED RETRO REFLECTIVE SHEETING CONFORMING TO TYPE – IV OF ASTM-D 4956-01 IN GREEN AND SILVER WHITE INCLUDING SUBJECT MATTER, MESSAGE (BILINGUAL(, SYMBOL AND BORDERS ETC AS PER IRC: 67-2001, PASTED ON SUBSTRATE BY AN ADHESIVE BACKING WHICH SHALL BE ACTIVATED BY APPLYING HEAT AND PRESSURE CONFORMING TO CLASS -2 OF ASTM-D-4956-01 AND FIXING THE SAME WITH SUITABLE SIZED ALUMINUM ALLOY RIVETS @ 20 CM C/C TO BACK SUPPORT FRAME OF M.S ANGLE IRON OF SIZE 35X35X5 MM AND M.S FLAT OF 25X5 MM ALONG WITH THEFT RESISTANT MEASURES, MOUNTED AND FIXED WITH 2 NOS. CLAMP OF MLS FLATS OF SIZE 25X5 MM TO A VERTICAL POST OF 3 MTR HEIGHT MADE UP OF MSL PIPE OF 60 MM N.B WELDED WITH TWO HOLD FAST OF M.S ANGLE 25X25X3MM OF 30CM LENGTH EACH AT BOTTOM AND INCLUDING MAKING HOLES IN PIPES, ANGLES, PROVIDING & FIXING M.S MESSAGE PLATE OF REQUIRED SIZE, STEEL WORK TO BE PAIRED WITH TWO OR MORE COATS OF SYNTHETIC ENAMEL PAINT OF REQUIRED SHADE AND OF APPROVED BRAND AND MANUFACTURE OVER A PRIMING COAT OF ZINC CHROMATE YELLOW PRIMER (VERTICAL POST TO BE PAINTED IN BLACK/WHITE/GREY COLOR) BACKSIDE OF ALUMINUM SHEET TO BE PAINTED WITH TWO OR MORE COATS OF EPOXY PAINT OVER AN APPROPRIATE PRIMING COAST INCLUDING ALL LEADS AND LIFTS ETC. COMPLETE AS PER DRAWING, SPECIFICATION (AS PER DIRECTION OF OFFICER IN CHARGE.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender