Tender For Repair/Renovation And Modernization Of Ies Shift/Change Room & Industrial Canteen At O. F. Itarsi.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Nov 2026
13 days left
EMD
1.53 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Renovation And Modernization Of Ies Shift/Change Room & Industrial Canteen At O. F. Itarsi.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar and desposing |
| 2 | Demolition of reinforced cement concrete of roofs, floors ( Other than ground floor) beams, chajjas, and other similar suspended works, |
| 3 | Complete removal of existing treatment on wall, ceiling cornices etc. as directed. |
| 4 | Preparation of old painted plastered surface and Supply and apply one coat priming paint plaster coat & TWO coats plastic emulsion Paint on walls & ceiling etc. |
| 5 | Preparation of old painted wooden surfaces free from dust, dirt, loose scales, grease etc. and Supply & Apply TWO coat Synthetic enamel paint exc. 10 cm width or girth |
| 6 | Supply & laying of Virified Ceramic tiles light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 7 | Fixing of non skid ceramic tiles 7 to 8 mm thick area of each tile exc. 0.06 sqm but not exc. 0.11 sqm in floor set & jointed in neat cement slurry and pointed in white cement except tiles |
| 8 | Supply and laying of screed bed or bedding layer of cement mortar 1:4, 15 mm thick for laying tiles |
| 9 | S & F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match |
| 10 | Dismantling floor, hearth or wall tiling, including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises |
| 11 | Supply & Plastering, Rendering 12 MM thick cement plaster on wall, ceiling, roof projection, facia etc. with cement mortar 1:4 on fair faces of brick work or concrete surfaces as directed. |
| 12 | Taking down chowkhats with shutter (without taking off shutters from the frame) |
| 13 | S & F Plain, framed, panelled shutters, shutter frame made of 40 mm thick indian teak wood (Ist class hard wood) consisting of vertical styles, top rail size 100 x 40 mm, lock & bottom rail size 200 x 40 mm, 12 mm thick BWRgrade plywood any number of panels with one priming coat of pink primer & two coats synthetic enamel paint, all as per specification and as directed. |
| 14 | Supply and Fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. square tube for top and bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stilesand plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site, including required Al. handles, Al. Aldrop bolt, Al. Tower bolt, MS/GI butt hinges as per specification, drawing & as directed. |
| 15 | Supply & Fixing of 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite |
| 16 | Supply & fixing of Indian type Water closet vitreous china squatting pan \\"Orissa\\" pattern size 630 x 450 mm white with integral foot rests including trap set in and including concrete complete (Make- CERA, Hindware, Johnson Pedder, Parryware) and supplying and fixing 10 litres PVC, volveless, syphonic action type, low level flushing cistern of Make :- URA / HINDWARE / JOHNSON PEDDAR / PARRYWARE with inlet, ball valve, float, brackets with PVC flush pipe 32mm Dia, for low level cistern and provide & fixed 100mm Dia. cast iron sanitary connections- short connections pipe with socket length upto 300 mm to fit WC out-let (IWC) fixed in repair all as per specification and as directed. |
| 17 | Supply & Fixing of Vitreous China wash down water closet pan (pedestal pattern), whitecomplete (Make- CERA, Hindware, Johnson Pedder, Parryware) and supplying and fixing 10 litres PVC, volveless, syphonic action type, low level flushing cistern of Make :- URA / HINDWARE / JOHNSON PEDDAR / PARRYWARE with inlet, ball valve, float, brackets with PVC flush pipe 32mm Dia, for low level cistern and provide & fixed 100mm Dia. |
| 18 | Supply & fixing/providing of Vitreous China bowl urinals flat back, size of 465x355x265mm (Make : CERA, Hindware, Johnson Pedder, Parryware). complete including providing and fixing plugs, bedding urinals against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws pointing around urinal back in cement; supply & fixing of PVC automatic flushing cistern 5 ltr. cap. with brackets, PVC flush pipe, grating & union, discharge pipe. all as per specification and as directed |
| 19 | Supply & fixing/providing of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 20 | Supply & Fixing of Vitreous China wash basin, white, flat back, size 630x450mm excluding ditto but includingbrackets, including cutting for and pinning in ends of brackets or erecting stand. |
| 21 | Supply & Fixing of plain, solid, straight Chaukhats and frames, Ist class hard wood, wrought, framed rebated on the solid, rounded or chamfered put togther with glue, pinned at joints |
| 22 | Supply & Fixing of 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement as per directed. |
| 23 | Supply & fixing of 110mm PVC (SWR) 'P’ trap |
| 24 | Supply & Fixing of 125mm Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union |
| 25 | Supply and fixing of steel ventilaters/window with top/side hung shutter including projection type hinges with steel handle and steel peg stay complete,with glazing bars dovetailed or welded confirming to IS specification fixed in repairs and as directed. |
| 26 | Excavating over areas in hard/dense soil not exceeding 1.5 M deep and getting out as directed. |
| 27 | Excavating over areas in hard/dense soil exceeding 1.5 M deep and n. exc. 3.00 M depth & getting out as directed. |
| 28 | Removing of excavated soil lead not exceeding 50 mtr and depositing where directed. |
| 29 | Returning, filling in hard/dense soil including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 30 | M & L for hardcore of broken stone or boulder of gauge n. exc. 63 mm, spread and levelled in layers not exc. 15 cm thick watered and rammed to a true surface. |
| 31 | Providing & Laying of cement concrete D2-type, 1:4:8 mix. (40mm graded aggregate) in foundations, filling, Floors etc. |
| 32 | Providing & laying of cement concrete B1-type 1:2:4 (20mm graded agg.) in floor and drains etc. |
| 33 | Supply & fixing of 15 mm dia bore bib taps cast copper alloy with butter fly handle |
| 34 | Providing & Construction of Brick work with sub-class `B' bricks & cement mortar 1:4, straight or curved with modular bricks |
| 35 | Providing & laying of RCC B1-type 1:2:4 Mix using 20mm graded agg. In Beams, cantilevers, bressummers, lintels etc. Excluding the cost of form work & rainforcement but including the cost of finishing and curring etc. as per specification and as directed. |
| 36 | (M&L) Reinforced concrete pipes 200 mm dia, class NP2, laid and jointed complete with collars |
| 37 | Supply & Plastering, Neeru finish to plastering surface as specified |
| 38 | Laying precast cement concrete in landings, cover slabs (for man holes etc.), chajja, shelves with plain faces B1-type 1:2:4 Mix using 20mm graded agg. set in cement mortar 1:6 Except blocks or slabs |
| 39 | Supply & fixing mild steel deformed or twisted bars 10MM Dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, beams(plinth & roof) etc, hooking ends and binding with mild steel wire (annealed) not less than 0.9 MM Dia.all as per specification and as directed . |
| 40 | Supply & Fixing of mild steel deformed or twisted bars 6 MM to 8mm Dia. cut to length bent to shape required including cranking, bending, hooking ends, placing in position and supply & binding with mild steel wire (annealed) not less than 0.9 MM |
| 41 | Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 42 | Supplying and laying of 16 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 43 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out |
| 44 | S & F of fancy type 15 mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-120gms) |
| 45 | Site cleaning in soft soil |
| 46 | Supply & fixing of stop valve of PTMT any colour high pressure screwed for iron pipe and fixed.15 mm dia bore (Minimum weight 15mm-90gms/ 20mm-92gms) |
| 47 | Providing & Construction of Brick work with sub-class `B' bricks in one brick thick honey comb walling, built in cement mortar 1:4, straight or curved with modular bricks |
| 48 | M & L of Loose filling with Broken bricks of gauge 80 to 150 mm in soakage pits, soakage wells all as per specification and as directed. |
| 49 | Preparation of Old steel surfaces free from dust, dirt, loose scales, grease etc. and Supply & Apply Two coat Synthetic enamel paint. as directed. |
| 50 | Supply & Fixing of Rough cast wired glass, 6.4mm thick and glazing in square for window / ventilator /Door , fixed with oil putty / beads in squares. Area of each glass pane not exceeding 0.50 Sqm. All as directed. |
| 51 | Preparing of old decorated plastered surface on wall, cornices ,soffits, chajjas, facias etc. including removal of nails repairs/ re-filling of plug holes, cracks, minor pittings with cement mortar, lime putty plaster of paris, touching with primer, wetting the surface with water and supply & apply a coat of cement based paint including curing with water for two days and than supply & apply final coat cement based paint white or tinted as per specification 5410- 1969 and curing for two days all as directed (Total Two coats). |
| 52 | Preparation of old decorated plastered surfaces and Supply & Apply one coat Plastic emulsion paint on WALL/Ceiling, cornices etc. |
| 53 | Taking down plastering on brick work or concrete surfaces in cement morter including racking out joints, hacking for key scrubbing down with water etc |
| 54 | Supply & fixing of 5 pin socket outlet 2 in 1, 5 Amps. fiush type with ISI mark. Make: Anchor/Cona/HAVELL'S or EQUIVALENT |
| 55 | Supply & fixing of point wiring for independent 6 pin socket outlet,15 Amps. control by one switch, using with 2.5 sqmm copper conductor 1100 V grade PVCsingle core, sheathed/ insulated cable (Polycab/Finolex/ Havells or Equivalent make), in heavy duty rigid PVC conduit complete with fittings and all accesories (including screws, clips, plugs, clamps, etc.), joint boxes, Junction boxes, terminal boxes of required size with 3 mm thick plastic laminated sheet cover (for mounting or housing switches, socket outlets, fan regulators, etc.), rectangular/ round blocks and boards (those required for mounting of fan regulators, ceiling rose, lamp holder tubelight fittings etc.), with continuous running FRLS PVC sheathed/ insulated 1.5 sq.mm copper wire of green colour use as earth wire and separate neutral cable of black colour for each individual circuit should be provided, all as directed & testing to be carried out as specified. |
| 56 | Supply & fixing of 15 Amps. Switch piano fiush button single pole one way, with ISI mark. Make: Anchor/Cona/Havell's or equivalent |
| 57 | Supply and fixing of socket outlet 2 in 1, 3 pin, 5 and 15 Amps. fiush type with ISI mark. Make: Anchor/Cona/Havell's or Equivalent. |
| 58 | Supply & fixing of ceiling rose PVC/polycorbonate isolated, 3 phase with ISI mark, Make: Anchor/Cona/Bajaj/Havell's or Equivalent. |
| 59 | Supply and fixing LED tube lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 60 | Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) |
| 61 | Fixing only stepped type electronic fan regulator flush type, on the existing phenolic laminated sheet etc. as required or as directed. |
| 62 | Supply & fixing of Angle lamp holder, PVC/polycorbonate type with back plate suitable for battan fittings, with ISI mark. Make: Anchor/Cona/Bajaj/Havell's or Equivalent |
| 63 | Supply & fixing of 12 way single pole, single door MCB box in sheet metal enclosure for DB's, with 200 Amps. Rated busbar, neutral link & earth connector, Make; Havells/Anchor/Standard/HPL or equivalent |
| 64 | Supply & fixing of single Pole 5 A to 32 A, 'C' curve miniature circuit breaker (MCB), breaking capacity 10 kA complete with connection testing and commissioning. Make: HPL/Siemens/Havells or equivalent. |
| 65 | Supply & fixing of single Pole & neutral 32 A, 'C' curve miniature circuit breaker (MCB), breaking capacity 10 kA complete with connection testing and commissioning. Make: HPL/Siemens/Havells or its equivalent. |
| 66 | Supply & fixing of 5 Amps. Switch piano fiush button single pole one way, with ISI mark. Make: Anchor/Cona/HAVELL'S or EQUIVALENT |
| 67 | Taking down copper / aluminium point wiring (light,fan,socket,or power) complete including fixture and fittings such as switches, sockets, ceiling rose, pendant, regulators, light fittings etc. removing materials to store for keeping in safe custody and making good disturbed surface of wall, floors etc. |
| 68 | Cutting chases, pinning in. making good surfaces to facings where required and pointing in cement mortar 1:3 for flush mounting of terminal boxes (for mounting or housing switches, socket outlets, fan regulators, etc.) on wall for conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth |
| 69 | Supply & fixing of point wiring for one light point or one fan point controlled by one switch, using 1.5 sq.mm copper conductor, 1100 V grade FRLS PVC single core, sheathed/ insulated cable (Polycab/Finolex/ Havells or Equivalent make), in heavy duty rigid PVC conduit complete with fittings and all accesories (including screws, clips, plugs, clamps, etc.), joint boxes, Junction boxes, terminal boxes of required size with 3 mm thick plastic laminated sheet cover (for mounting or housing switches, socket outlets, fan regulators, etc.), rectangular/ round blocks and boards (those required for mounting of fan regulators, ceiling rose, lamp holder tube light fittings etc.), with continuous running FRLS PVC sheathed/ insulated 1.5 sq.mm copper wire of green colour use as earth wire and separate neutral cable of black colour for each individual circuit should be provided, all as directed & testing to be carried out as specified. |
| 70 | Supply & fixing of point wiring for 3 pin socket outlet, 5 Amps. on the same board with other switches using 1.5 sq.mm copper conductor, FRLS PVC single core, sheathed/ insulated cable (Polycab/Finolex/ Havells or Equivalent make), in heavy duty rigid PVC conduit complete with fittings and all accessories (including screws, clips, plugs, clamps, etc.) with continuous running FRLS PVC sheathed/ insulated 1.5 sq.mm copper wire of green colour use as earth wire and separate neutral cable of black colour for each individual circuit should be provided, all as directed & testing to be carried out as specified. |
| 71 | Supply & fixing of point wiring for independent 5 pin socket outlet, 5 Amps. control by one switch, using 1.5 sq.mm copper conductor, 1100V grade PVC single core, sheathed/ insulated cable (Polycab/Finolex/ Havells or Equivalent make), in heavy duty rigid PVC conduit complete with fittings and all accesories (including screws, clips, plugs, clamps, etc.), joint boxes, Junction boxes, terminal boxes of required size with 3 mm thick plastic laminated sheet cover (for mounting or housing switches, socket outlets, fan regulators, etc.), rectangular/ round blocks and boards (those required for mounting of fan regulators, ceiling rose, lamp holder tubelight fittings etc.), with continuous running FRLS PVC sheathed/ insulated 1.5 sq.mm copper wire of green colour use as earth wire and separate neutral cable of black colour for each individual circuit should be provided, all as directed & testing to be carried out as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender