Tender For Repairing And Renovation Work Of Aiml Applications Laboratory For Electrical Systems, Situated At The First Floor Of The Electrical Engineering Department, Jadavpur University Main Campus.
Tender Value
4.66 Lakhs
Estimated cost
Bid Submission
14 Nov 2026
8 days left
EMD
11000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing And Renovation Work Of Aiml Applications Laboratory For Electrical Systems, Situated At The First Floor Of The Electrical Engineering Department, Jadavpur University Main Campus.
BOQ
| Sl. No. | Item Description |
| 1 | Stripping off worn out plaster and raking out joints ……… lead of 75m as directed.[Page No-11 Item No. 10] |
| 2 | Cleaning the Concrete surface by removing dirt and debris marking defective locations ……… of theEngineer- in-Charge. [ Page No-45 Item No. 5 ] |
| 3 | Cleaning the exposed reinforcement preferably upto fulldiameter …… as per manufacture specification.[Page No- 45 Item no-6 ] |
| 4 | Dismantling all types of masonary excepting cementconcrete plain or reinforce ………… lead of 75m.a) In ground floor including roof.[Page No-10 Item No. 1] |
| 5 | Weiding in M.S structural work with gas or electric.(a) Tack weld [ Page No-81 Item No-31 (a) (b)] |
| 6 | (b) Continuous weld[ Page No-81 Item No-31 (a) (b)] |
| 7 | Applying epoxy based reactive joining agentfor joining the old concrete with fresh concrete …… specified time as per manufacturersspecification. (0.4 Kg / m² of concrete surface).[ Page No-45 Item No-7 ] |
| 8 | Cement concrete ( 1:1.5:3 ) with graded stone chips 6 mm… the Engineer -in -Charge.(b) 25 mm thick[ Page No-40 Item No-27 (b) ] |
| 9 | (c) 37.5 mm thick[ Page No-40 Item No-27 (b) ] |
| 10 | Applying two coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion.[ Page No-45 Item No-8 ] |
| 11 | Plaster (to wall ,floor, ceiling etc.) with sand cement …. where necessary (ground floor)(i) with 1:4 cement mortar(a) 20 mm thick plaster [ Page No-189 Item No-1 (i) (b) ] |
| 12 | (b) Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand (1.5 mm thick)[ Page No-204 Item No-5 (b) ] |
| 13 | Making one set of scaffolding only for replacing glasspanels, painting, uprooting plant ………… of the Engineer-in-charge.(a) 3.90 metre hight[ Page No-23 to 24 Item No-3(a)] |
| 14 | Supplying and laying true to line and level vitrified tiles ofapproved brand (size not less than 600 mm x 600 mm x 10 mm thick) …… direction of Engineerin-charge.(II) With polymerised Adhesive [6 mm thick ] & epoxygrouting materials for filling joints including spacer-2 mm(A) Deep colour & White[ Page No-66 Item No-36 (II) (B) ] |
| 15 | Supplying, fitting, fixing marble slab / tiles, 15 mm. to 18 mm. thick in dado / wall in 15 mm thick [avg] cementmortar (1:2 ) ……… curing complete.(b) With Chawk Doongri.(iv) Area of each slab/tile exceeding 1.00 sqm.[ Page No-56 Item No-25 (b) (iv) ] |
| 16 | A) Supplying & laying of approved brand of scrach proof,semi flexible P.V.C. blended homogeneous marble Vinyle flooring ………… of the Engineer-in charge. 2mm thick [ Page No-76 Item No-1(A) ] |
| 17 | (a) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc .……… smoothening surfaces by sand papering etc.[Page No. 200 Item No. 1 (b)(a)] |
| 18 | (b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc .……… smoothening surfaces by sand papering etc.[Page No. 200 Item No. 1 (b)(a)] |
| 19 | Painting Best Qlty. syanthetic enamel paint of approved Qlty …… if necessary.(a) On timber or Plaster Surface.Two Coats.[Page No. 200 Item No. 2(a) (b)] |
| 20 | (b) On steel or other metal Surface.Two Coats[Page No. 200 Item No. 2(a) (b)] |
| 21 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface or new surface to ……… of the EIC.( In Ground Floor ) One Coat(i) Water based interior grade Acrylic Primer[ Page No- 195, Item No- 7 (a)] |
| 22 | Acrylic Emulsion Paint of approved make and brand onwalls and ceiling ……… including putty. (two coats)(i) Standard Quality[ Page- 196, Item No-10 ] |
| 23 | Supply of Mazdoor (male).[ Page No-303 Item No-3 ] |
| 24 | Supplying Carpenter (Head) for taking out damage Wall[ Page No-303 Item No-5 ] |
| 25 | Supplying Carpenter (Helper) for taking out damage Wall[ Page No-303 Item No-7 ] |
| 26 | Removal of rubbish,earth etc. from the working site…. & cleaning the site in all respect as per direction of EIC.[Page No-12 Item No-13] |
| 27 | Supply of santras for chipping purpose.[ Page No-303 Item No- 13 ] |
| 28 | M.S works in brackets made from flats, angles , tee etc. to sizes …………… with necessary bolts, nuts, washer or screws etc.[ Page No-103 Item No-8 ] |
| 29 | S.F.& F in position 10-15 micron anodised (mat finishIS -1855-199) heavy duty aluminium door & window for any floor.(a) Openable Portion Analysis Rate. Ref Tender No. C-61 /11-12 |
| 30 | (b) Fixed PortionAnalysis Rate. Ref Tender No. C-61 /11-12 |
| 31 | Cutting chase upto 125 x 150 mm and subsequent mending of damages.(a) In brick wall.[ Page No-12 Item No-11 ] |
| 32 | Extra cost of labour for prefinished and premouldingNosing to treads of steps, railing, window sill etc. of Marble Stone.[ Page No-303 Item No- 24 ] |
| 33 | (A) Providing and fixing of false ceiling with powder coatedexposed G.I grid suspension system …………… direction of Engineer-in-charge.A) False Ceiling (with 6mm thick Fibre Cement Designer Board and E-Grid T-2430)[Page No- 158 Item No-3 ] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender