Tender For Addn/Altn To Security Wall & Gates And Improvement Of Ils Localizer At Af Stn Bamrauli Under Ge (Af) Bamrauli
Tender Value
15.52 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
8 days left
EMD
31500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn To Security Wall & Gates And Improvement Of Ils Localizer At Af Stn Bamrauli Under Ge (Af) Bamrauli
BOQ
| Sl. No. | Item Description |
| 1 | S&F of framed work of steel Fe 410 -W (Gde E- 250) quality as in doors, grill, jali or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, complete all as specified and directed. |
| 2 | S&F of MS 1.25 mm thick MS plain black sheet in steel gates and similar work, cut to size, holes punched, including round headed screws and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded as required, complete all as specified and directed. |
| 3 | M&L for preparing new painted steel & iron surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer etc, complete all as specified and directed. |
| 4 | S & F of pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 5 | S&F of fibre glass reinforced translucent corrugated sheeting 2mm thickness with two corrugations side lap fixed with coach screw and washer in roof, wall etc, complete all as specified and directed. |
| 6 | M&L for cement concrete (type C-2 40mm graded crushed stone aggregate) 1:3:6 in foundations, filling and mass concrete etc, complete all as specified and directed. |
| 7 | Demolition of brickwork or stone boulders masonry built in CM incl all quins, arches, pillers etc, complete all as specified and directed. |
| 8 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6M mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 9 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement, complete all as specified and directed. |
| 10 | Supply only Integral water proofing compound, complete all as specified and directed. |
| 11 | Material and Labour for complete removing existing treatment on old plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from Ground floor upto 04 storeys height of bldgs bldgs, complete all as specified and directed.Make: \\"Apex Ulitima\\" of Asian Paints \\"trucare\\" Primer / \\"Weather coat all Guard\\"of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints as approved by GE. |
| 12 | M&L for RCC nominal mix type B1 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc, complete all as specified and directed. |
| 13 | M&L for mild steel TMT bar 10mm dia and over cut to length, bent to shape required including cracking, bending, spirally for hooping for column, hooking end and binding with including miled steel wire canconlled not less than 0.9mm dia or securing clips, complete all as specified and directed. |
| 14 | All as per item No. 13 here-in-before but, 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders/ tempreture bar etc including other works, complete all as specified and directed. |
| 15 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions with finished surfaced etc, complete all as specified and directed. |
| 16 | For work to soffits of suspended slab such as roof shalves, floors shalves, landing and similar works, n.exc 200mm thick (horizontal or slopping) for fair finished surfaces of concrete etc, complete all as specified and directed. |
| 17 | M&L for 18- 20mm thick granite Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white ement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 18 | S&F of Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain• ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed. |
| 19 | S&F in repair concertina coil 900mm dia (in stretched position) hot dip galvanized steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dovetail clips (18 SWG) fixed over and including razaor wire, medium barb, hot dip galvanized steel wire razor wire with angle iron. The concertina coil to be fixed with razor wire at points wherever coil touches bottom of razor wire with the help of hog rings (14 SWG) including all fittings like fasteener clips,steel lug rings etc complete all as specified and directed. Note- (i) Stretch length of each coil shall be 6 mtr, complete all as specified and directed. |
| 20 | M&L for PVC/CPVC/plastic /HDPE/FRP/ Non metallic L shape, 50 x 50 mm angle for securring fencing including binding wire as required, complete all as specified and directed. Note- All material should be Non metallic and approved by Engr-in-Charge. |
| 21 | M&L for PVC/CPVC /plastic /HDPE /FRP /Non metallic fencing size of mesh not more than 50mmx50mm, complete all as specified and directed. Note- All material should be Non metallic and approved by Engr-in-Charge. |
| 22 | Excavating in hard dense soil for post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 23 | S& F for MS posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh, etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 24 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire incl taking down old chain link fencing, complete all as specified and directed. |
| 25 | Supply only Chain link MS galvanisd fencing, any size or type, complete all as specified and directed. |
| 26 | Fixing only PVC coated chain link fencing including fixing of line wires any mesh, size and any type of standards, rails, straining bolt etc including provision of binding wires, complete all as specified and directed. (Supply of MS line wire and flatwe iron bolt & nuts measuredand paid seperately). |
| 27 | Supply only PVC coated (1mm thick) chain link fencing exc 2.00 butbn.exc 3.50kg per sqm with size of mesh 50x50mm and thickness of wire n.exc 2.83mm, complete all as specified and directed. |
| 28 | M & L for preparation of old painted steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint), complete all as specified and directed. |
| 29 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender