Tender For Repair/Replacement Of Chain Link Fencing, Barbed Wire, Paver Blocks, Hard Standing And Cleaning Of Sewage Line, Manholes & Drain At Af Stn Mothala Under Ge(Af) Naliya.
Tender Value
19.99 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
16 days left
EMD
39980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kachchh → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Chain Link Fencing, Barbed Wire, Paver Blocks, Hard Standing And Cleaning Of Sewage Line, Manholes & Drain At Af Stn Mothala Under Ge(Af) Naliya.
BOQ
| Sl. No. | Item Description |
| 1 | Systematicaly cleaning and desludging of pipe sewers upto 150 mm dia manually excluding man holes but including gully traps of any size and depth, by passing knots, bamboo, kamti and disc of required size, pumping out liquid waste/ sewage, plugging/ diverting the flow in the drain, if necessary and stacking the removed silt/ sludge in deposits as directed including taking precautionary measures such as safty belts, dry cells, torch for lighting inside the manholes and drain etc, sprinkling bleaching powder on the silt/ sludge to avoid bad smell and disposal of silt outside MD land complete all as specified and directed.Note :- Measurement shall be the length from manhole to manhole including the wall thickness of manhole |
| 2 | Cleaning and removing of blockage of Indian or European type water closet including blockage of Nahani trap or floor trap or gully trap of any size type upto the Ist manhole (blockage of any type took place at IWC or EWC , blockages of kitchen trap, bathroom, wash hand basin trap due to stuck of any substance or material due to any other reasons to the entire satisfaction of users /occupants manually or with using pumping device or any other suitable method or mechanically complete all as specified and directed. |
| 3 | M&L for removing manhole cover of any type/ size/ thickness and cleaning manhole chamber of any shape and size upto 1.5m deep by removing sludge/ mud from manhole and refixing cover in same position/ laid dry including sprinkling antibiotic powder and removing debries outside of MD land complete all as specified and directed. |
| 4 | All as per serial item number 3.00 here-in-before but depth exceeding 1.50 metre not exceeding 3.00 metre complete all as specified and directed. |
| 5 | Material and labour for cleaning of septic tank for 50 users including debris/ screen chambers by removing cover slab set in CM of any shape/ thickness and pumping out water sludge mud with suction pumps including cleaning of inlet/ outlet pipes, refixing cover slab in CM (1:3), sprinkling of antibiotic powder etc and dispose mud/ sludge out side MD land complete all as specified and directed.Note:- Rate quoted is deemed to include the cost of all safety/ protective gears required for workers employed by contracor. |
| 6 | All as per serial Item number 5.00 here-in-before but for 25 users. |
| 7 | Excavating in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth for foundation etc and getting out in hard /dense soil complete all as specified and directed. |
| 8 | Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed. |
| 9 | Removing excavaed materials exceeding 250 metre but not exceeding 500 metre and depositing where directed complete all as specified and directed |
| 10 | Demolition and breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar 150 mm internal dia of pipe, complete all as specified and directed. |
| 11 | Material and labour for concrete bed to drain pipes, including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6, type C-2 for 150 mm bore of pipe, complete all as specified and directed. |
| 12 | Material and labour for salt glazed stone ware (SGSW) grade 'A' drain pipes 150 mm internal dia laid in trenches on concrete bed and jointed, complete all as specified and directed.Note :- Excavation, earth work and concrete bed shall be measured and paid for separately under respecitive item. |
| 13 | Material and labour for removing old PVC/Cast Iron floor trap including wall crossing pipe and fixing with new outlet 75 mm PVC (SWR) floor trap with stainless steel grating and new wall crossing and filling with PCC (1:2:4) mixed with water proofing compound including matching with existing tile and jointed with outer pipe line with paste and connected to near manhole in groundfloor complete all as specified and directed. |
| 14 | Demolition of brick work / pre cast concrete article / stone masonry built in cement mortar, complete all as specified and directed. |
| 15 | Material and labour for precast cement concrete block masonary walling with solid blocks of PCC 1:5:8 (using 20mm graded stone aggregates), exceeding 10cm in width and setting in CM 1:6, complete all as specified and directed. |
| 16 | Taking down cement plaster of any descreption and in any position of brick or concrete surfaces & racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 17 | Material and labour for 15mm thick rendering in CM 1:4 including finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 18 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of debris outside MD land complete all as specified and directed. |
| 19 | Material and labour for 100 mm thick PCC 1:3:6, type C2, (using 40mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 20 | Material and labour for 40 mm thick PCC 1:2:4, type B1, (using 20mm graded stone aggregate) and finishing the surface even and smooth using extra cement complete all as specified and directed. |
| 21 | Material and labour for forming contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound grade 'A' complete all as specified and as directed. |
| 22 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removal of debris outside MD land complete all as specified and directed. |
| 23 | Material and labour for precast RCC 1:2:4, type B-I (using 20mm graded stone aggregate) as in man hole cover set in CM 1:4 as directed with necessary form work complete all as specified and directed |
| 24 | Material and labour for TMT bars, 6 to 8 mm dia cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia complete all as specified and directed. |
| 25 | Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 26 | Supply and fix pre-prainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fix with self tapping screws complete all as specified and directed. |
| 27 | Supply and fix pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 28 | Demolition of stone slabs and tiles of any description or thickness if floors, aprons laid dry or laid dry and pointed all as specifed |
| 29 | Material and labour for 75 mm thick PCC 1:3:6, type C-2 (using 20 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. |
| 30 | Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 31 | Material and labour for factory made machine pressed precast rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 graded fixed with grey cement and pigment complete all as speicified and as directed. |
| 32 | Dismantling timber scantlings in section, in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed. |
| 33 | Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 34 | Material and labour for PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed. |
| 35 | Supply and fix mild steel angle, flats etc independently fix without connecting plates etc but to ordinary length conforming to Fe 310 or Fe 410-O as in fencing ports/cover plate incl drilling holes for nuts and bolts etc complete all as specified and directed. |
| 36 | Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5 cm long, dia of neck 5 to 10 mm, complete all as specified and directed. |
| 37 | Dismentling fencng wiremesh, any type in any position and seperating them the materials and removing the unserviceable wiremesh form work site as directed |
| 38 | Supply and fix fabric fencing mesh of size 50 mm x 50 mm made of GI wire of dia 3 mm to achieve outer dia not less than 4 mm in required colour and shade fixed in posts bolts, drilling holes, notching for wire, fla irons filets (for securing wire mesh etc) necessary drilling, bolting or reiveting to existing steel or new steel posts complete all as specified and directed. |
| 39 | Supply and fix round steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia complete all as specified and directed. |
| 40 | Material and labour for preparation of new steel surfaces not exceeding 10 cm in width or girth and applying one coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 41 | Material and labour for preparation of old steel surfaces not exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender