Tender For Construction Of Orphanga Home At Sorde Village, Kamjong Dist, Manipur
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Nov 2026
20 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamjong → Manipur
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Orphanga Home At Sorde Village, Kamjong Dist, Manipur
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechanical means (Hydraulic excavator) oblique manual means in foundation trenches or drains (not excedding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil. |
| 2 | Half brick masonry with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level 6.13.2 cement mortat 1:4 (1 Cement : 4 coarse sand) |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and reinforcement - All work above plinth level : 1:1.5:3 (1 Cement : 1.5 coarse sand (zone-III) : 3 grade stone aggregate 20 mm nominal size) |
| 4 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo Mechanically Treated bars |
| 5 | Providing and laying 75mm thick compacted bed of dry stone aggregate of 40mm thick nominal size incl spreading, well ramming, consolidating and grouting with jamuna sand, incl finishing smooth etc complete as per direction of engr -in-charge |
| 6 | Cement concrete pavement with 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), including finishing complete. |
| 7 | Neat cement punning at cement concrete floor as per direction of Engg-in -charge |
| 8 | 15mm cement plaster finished with a floating coat of neat cement of mix (1:4 (1cement : 4 fine sand) on external wall |
| 9 | 12mm cement plaster of mix 1:4 (1 cement : 4 fine sand) |
| 10 | Finishing wall with water proofing cement paint of required shade : New work (Two or more coat applied @ 3.84 Kg/10 Sqm) |
| 11 | Distempering with oil bound washable distemper of approved brand and manufractures give an even shade New work (one or more coats) over and including water thinnable priming coat with cement primer |
| 12 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 13 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrougth framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lungs or dash fastener shall be paid for separately) 2nd class H/wood |
| 14 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately all complete as per direction of Engineer-in-charge. Kiln seasoned selected planks of sheesham wood 30mm thick shutters sqm |
| 15 | Providing & fixing glass panes with putty and glazing clips in steel doors windows, clerestory windows all complete with : 4.0 mm thick glass panes |
| 16 | Providing and fixing ISI marked oxidised M.S sliding door bolts of size 250 x 16mm with nuts and screws etc complete. |
| 17 | Providing and fixing ISI marked oxidised M.S tower bolt of size 200 x 10mm black finish, Barrel type) with necessary screws etc. complete |
| 18 | Providing and fixing factory made PVC door frame of size 50x47mm with a wall thickness of 5mm made out of extruded 5mm rigid PVC form sheet mitered at corners and joint with two Nos 150mm long brackets of 15x 15 mm MS square tube, the vertical door frame profiles to be reinforced with 19 x 19 mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be providing throughout the frame. the door frame to be fixed to th throughout the frame. the foor frame to be fixed to the wall using MS screw 65/100mm size complete as per manufacture specification and direction of Engr-in-charge |
| 19 | Providing and fixing factory made panel PVC door shutter consiting of frame made out of MS tubes of 19 gauge thickness and size of 19x 19mm for styles and 15x 15mm for top and bottom rails. MS frame shall have a coat of steel primers of approved make and manufacture. MS frame covered with 5mm thick heat moulded PVC \\"C\\" channel of size 30mm thickness, 70 mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10mm (5mm x 2) thick, 20mm vide cross PVC sheet be provided as gap insert for top rails & bottom rail, panelling of 5mm thick both side PVC sheet beading on inner side and joined together with solvent cement using PVC solvent adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing 30mm thick pre laminated PVC door shutters |
| 20 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 21 | Providing and fixing precoatede galvanised iron profile sheets (Size, shape and pitch of corrugation as approved by Engg-in-charge) 0.50mm (+0.05%) total coated thickness with zinc coating 120 gm/Sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyster top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 mtr or as desired by Engg-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) which with EPDM seal, complete upto any pitch in horizental/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 22 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges Plain (500-600mm) |
| 23 | Providing 10mm thick plaster of paries (gypsun anhydrous) celling upto a height of 5m above floor level, over first class kail wood strips 25x6 mm with 10mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately); Flat surface. |
| 24 | Providing and fixing 12mm thick flat pressed 3 layer medium density particle board or graded particle board IS: 3087 marked, in celling with necessary nails etc. complete. |
| 25 | Providing and wash basin with CI brackets, 15mm CP brass piller taps, 32 mm CP brass waste of standard pattern, including painting of brackets, cutting and making good the wall wherever required white vitreous china wash basin size 630x450mm with a pair of 15mm CP brass pillar taps. |
| 26 | Polyethylene water storage tank with cover and suitable locking arrangment |
| 27 | Providing and fixing white vitreous china pedestal type water closer (European type W.C pan) with seat and lid 10 litre low level white P.V.C flushing cistern, including flush pipe, with manually controlled device (Handle lever), conforming to IS : 7231, with all fitting and fixtures complete, including cutting and making good the walls and floors wherener required : W.C pan with ISI marked white solid plastic seat and lid |
| 28 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing Rectangular shape 453x357mm |
| 29 | Providing and fixing on wall face unplasticised - pvc rain water pipes confirming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, single socket pipes 110 mm diameter |
| 30 | Providing and fixing G.I pipes complete with G.I fittings and clamps, i/c cutting and making good the wall etc 15mm dia nominal bore |
| 31 | Providing and fixing G.I pipes complete with G.I fittings and clamps, i/c cutting and making good the wall etc 20mm dia nominal bore |
| 32 | Providing and fixing C.P brass bib cock of approved quality confirming to IS : 8931:15mm nominal bore |
| 33 | Providing and fixing C.P brass stop cock of standared design and of approved quality confirming to IS : 8931:15mm nominal bore |
| 34 | Providing and fixing C.P brass angle value for basin mixer and geyser points of approved quality confirming to IS : 8931:15mm nominal bore |
| 35 | Stainless steel kitches sink - with drain board 510x1040 mm bowl depth 250mm |
| 36 | PTMT-waste coupling 38/40 mm with flexible (Coil shaped) PVC waste pipe for sink and wash basin 32mm dia with length not less than 700mm i/c PVC waste fitting etc. |
| 37 | Wiring for light point/ fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch phenolic laminated sheet, suitable size of MS box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc |
| 38 | Supply and fixing piano type switch 5 amps including connection etc |
| 39 | Supply and fixing 3 pin 5/6 Amps socket outlet including connection etc. |
| 40 | Supply and fixing 8 way SPN DB Single pole and neutral steel sheet enclosure double door 240 volts, prewired connected |
| 41 | Supply and fixing MCB DP double pole 240V, 40 amps complete with connection \\"B\\" curve |
| 42 | Supply and fixing MCB SP 5 to 32 Amps 240V complete with connection \\"B\\" curve |
| 43 | Supplying and fixing two module stepped type electronic fan regulator including connections but excluding modular plate etc. as required |
| 44 | Supplying and fixing 3 pin, 5A ceiling rose including connections etc. as required |
| 45 | Supply and fixing LED tube light batten 1 x 20 watt including bipin holder, LED driver complete with PVC 3 core copper conductors connection etc. |
| 46 | Supply and fixing Ceiling fan 1200mm sweep including down rod, connection wire as per required incl connection complete |
| 47 | Supply and fixing exhaust fan 300mm sweep including connecting wires as per required incl connection compelet |
| 48 | Staging for water storage tank of size 1.50m x 1.50m x 2.00 m height, shall be made of MS SI 55x55x5mm vertical posts (04 Nos), 40x40x5mm diagonal members and 55x55x5mm horizontal memebers. MS chequered top plate made of 4.00 mm thick, surrounding & Diagonally supported from bottom with MS AI 55x55x5mm thick. MS flat Iron 40x5mm thick will be provided at the center joint of the MS Plate. At the bottom of each vertical post 100mm x 100mm x 6mm thick MS Plate shall be provided for stable of the staging complete as per drawing. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender