Tender For special Repair To E/M Instlns At Mrs And High Lift Pump House At Leimakhong Mil Stn Under Ge 869 Ews.
Tender Value
29.07 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
21 days left
EMD
58140
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangpokpi → Manipur
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To E/M Instlns At Mrs And High Lift Pump House At Leimakhong Mil Stn Under Ge 869 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' |
| 2 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed. |
| 3 | M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed. |
| 4 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 5 | M&L for TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 6 | M&L for RCC (Nominal Mix) Type B0, 1:2:4(using 12.5mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 7 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping), fair finished surface of concrete complete all as specified and directed. |
| 8 | Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 9 | M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed. |
| 10 | M&L for rendering 15mm thick in CM 1:4 on on fair surfaces of brick in two separate coats (10mm thick backing coat and 5mm thick top coat) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing works/concrete surfaces finished even and smooth complete all as specified and directed.Note : (i) WPC will be measured and paid separately (ii) Rates deemed to be inclusive of scaffolding upto height 12 Mtr at reqd places. No additional payment will be made on this account |
| 11 | M&L for rendering 5mm thick on fair face of brick work or concrete surface wall or ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as specified and as directed. (using Dimapur Sand) |
| 12 | M&L for repair to ends of chajjas/soffits/ceiling (Thickness of slab 10cm) by removing the old loose concrete material at the height upto 12 mtr cleaning the reinforcement fixing the wire mesh to reinforcement and finishing surface fair and even in cement mortar 1:4 and apply two coat of cement base paint inclding necessary scaffolding etc complete all as per directed by Engr-in- Charge |
| 13 | Supply only Integral WaterProofing Compound ISI Marked complete all as specified and directed. |
| 14 | M&L for preparation of new or previously untreated surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed |
| 15 | M&L for preparation for new or previously untreated plastered surface of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed. |
| 16 | M&L for preparation of surface plastered or unplastered new surface on ceiling and applying three coats of white wash complete all as specified and directed. |
| 17 | M&L for complete removal of old decorated plastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including cornices and pilasters etc and applying one coat of white wash on ceiling complete all as specified and directed. |
| 18 | Preparation of old plastered surfaces of walls including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and applying one coats of cement base paint including necessary scaffolding complete all as specified and directed. |
| 19 | M&L for complete removal of existing finish, scrapping and making good surfaces on old surface of walls and applying two coats of oil bound distemper paint over a coat of primer and 1mm thick wall care putty complete all as specified and as directed. |
| 20 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. Note :-Dismantling of false ceiling to be carried out carefully without damaging existing fitting and fixtures of flase ceiling items |
| 21 | S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 22 x22 x0.35mm and main/cross tee of size 24 x38 x0.35mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed. |
| 22 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed. |
| 23 | M&L for structural steel work in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed. |
| 24 | S&F steel work in tubular or square trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to Fe 410-W (Gde-E-250 quality A) complete all as specified and directed. |
| 25 | S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250 quality-A) complete all as specified and as directed. |
| 26 | S&F rolled mild steel Fe-410w (Gde-E-250) quality 'A' Roof trusses (framed) post , trussed, purlins, crane gantries , rails and fastening and havy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc complete all as specified. |
| 27 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 28 | S&F Pre- painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as specified. |
| 29 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip, straight flashing etc fixed with self tapping screws as specified. |
| 30 | S&F 0.63mm thick, plain galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. |
| 31 | M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 32 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc. 4 sqm each complete all as specified and directed. |
| 33 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed. |
| 34 | S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 35 | S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 36 | S&F 30mm thick 2nd class HW glazed skeleton shutters open rebated and prepared to receive glass gazed etc but divided into squares with plain chamfered or rounded mitred and rebated sash bar any numbers edges of framing plain chamfered or rounded fitted with cut and mittered beads for sceuring glass guage etc. size of members as specified in SSR pt-I section 8 clause 8.20(a) fitted to chowkhats complete all as specified and directed. |
| 37 | S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed. |
| 38 | S&F 150mm mild steel barrel tower bolt,stove enamelled black,with bright bolt and fixed complete all as specified and directed. |
| 39 | S&F 100mm long mild steel pressed handles, oval type,stove enamelled black complete all as specified and directed. |
| 40 | Demolition Cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness below or above ground level complete all as specified and as directed. |
| 41 | M&L for 75mm thick cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in plinth protection including finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.(Using dimapur sand) |
| 42 | M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed. |
| 43 | M&L for glass dividing strips 3mm thick and width of strip 38mm complete all as specified and directed. |
| 44 | Hacking Out Old broken Glass (any thickness,Size,Quality Or description) from wooden frames or metal frame, concrete or brick surrounds,glazed with Putty or fixed with beads area not exc 1.5 sqm complete all as specified and directed. |
| 45 | S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed. |
| 46 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with 140mm overall length of cover plate complete all as specified and directed. |
| 47 | S&F in repair fancy type harrison rail ,20mm dia mild steel ,chromium plated with fixing brackets,stops,rollers etc. for window and doors with curtain rings and decorative doom holders fixed to wall with screw complete all as specified and directed. |
| 48 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store & rubish of the permises complete all as specified and directed. |
| 49 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 50 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm , in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade and including rendering 10 mm thick on fair faces of brick work in CM 1:3 for recieving vertical dado tiling complete all as specified and directed. |
| 51 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 52 | S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in CM (1:4) as backing coat to receive tiles complete all as specified and directed. |
| 53 | S&F in repair, Vitreous china wash basin, white oval shape, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but incl brackets, waste pipe & CP waste coupling complete all as specified and as directed. |
| 54 | S&F in repair vitreous china squatting pan \\"Orissa\\" pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) with 'P' or 'S\\" trap from or back inlet etc including connection to trap and flushing pipe and provision of lime concrete bedding complete all as specified and as directed. |
| 55 | S&F in repair vitreous china European type/pedastal type water closet \\"P\\" and \\"S\\" trap inclduing PVC plastic seat cover (commander) complete all as specified and directed. |
| 56 | S&F in repair EWC seat cover PVC white colour including all fitting arrangements complete all as specified and as directed. |
| 57 | S&F in repair PVC flushing cistern syphonic action type,10 litters capacity, low level white with inlet ball, valve, float and handle including bracket ,PVC Connection and flush pipe complete all as specified and as directed. |
| 58 | S&F in repair brass chromium plated shower roses 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union any colour for fixing with 15mm pipe complete all as specified and directed. |
| 59 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 60 | S&F in repair Pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, but fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 61 | S&F in repair stop valves, ISI marked, 15 mm dia cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type) screwed down high pressure, screwed both ends for iron pipe or unions complete all as specified and directed. |
| 62 | S&F in repair of 15mm bore stop valves of cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 63 | S&F in repair brass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats, complete all as specified and directed. |
| 64 | S&F in repair fancy type 15mm bore bib taps, cast copper alloy, chromium plated long shank with capastain head screwed down for iron pipe or for brass ferule complete all as specified and directed. |
| 65 | S&F in repair PVC connection 15 mm x 600 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and directed. |
| 66 | S&F in repair of Soap dish, any type, fixed to plugs with chromium plated brass screws in the wall complete all as specified and as directed. |
| 67 | S&F in repair 75mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floor complete all as specified and as directed. |
| 68 | S&F in repair 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 69 | S&F in repair 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 70 | S&F in repair PVC (SWR) vent cowl for 110mm bore pipe complete all as specified and directed. |
| 71 | S&F PVC (SWR) junction single (single `T') equal or unequal with accessable door of the following bore inculding cutting out wall /concrete and finishing of surface to match existing surface . (a) 110mm |
| 72 | S&F 75mm dia PVC (SWR) floor trap/Gully trap, plain with grating including setting and jointing with solvent cement complete all as specified and directed. |
| 73 | Taking up or down 15mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 74 | Taking up or down 20mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 75 | S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 76 | S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 77 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, Capacity exc 250 litrs n exc 500 litrs, cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. |
| 78 | S&F in repair rotational moulded polyethylene water storage tank, ISI marked, 500 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections like ball brass valves of 20mm dia, high pressure with polythene float and fly nut complete, screwed for iron pipe of brass ferrule and fixed in 20mm bore GI tube complete all as specified in SSR Part-I and as directed. |
| 79 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified and as directed. |
| 80 | Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified and as directed. |
| 81 | S&F 150 mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed. |
| 82 | S&F 150 mm long aluminium alloy handles,fabricated type, anodised complete all as specified and directed. |
| 83 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed. |
| 84 | S&F in door or window frame of any description with aluminum anodised sections, coloured powder coating not less than 50micron, and fixing in positions including all necessary cleats, lugs, beading, and jointing arrangements, complete all specified & directed. |
| 85 | M&L for Anodised aluminium powder coated sliding aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc including all fitting complete all specified and directed |
| 86 | S&F 4.8 mm thick sheet glass, ordinary quality and fixed with aluminum beading and gasket suitable for aluminum frames in squares exceeding 0.5 sqm in each pane complete all as specified and directed. |
| 87 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 88 | Demolition of stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and directed. |
| 89 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed 20mm thick in CM 1:3 complete all as specified and directed. |
| 90 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , including screed bed 20mm thick in CM 1:3 complete all as specified and directed. |
| 91 | Taking down existing unserviceable treatment of any description including cement plaster any thickness from roof surfaces, cleaning of roof surfaces and preparing it for further treatment and removing rubbish from the site up to distance 50 mtrs complete all as specified and directed |
| 92 | M&L for Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed. |
| 93 | Material only for applying one coat of bitumen primer confirming to IS - 3384@ 1.20 Kg/Sqm complete all as specified and directed. |
| 94 | Labour only for applying one coat of bitumen primer on finished plastered surface complete all as specified and directed. |
| 95 | M&L for APP based polymeric membrane minimum weighing not less than 3.50kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 160 gms/sqm) laying on primed surface using torch application, overlaping shall be miniumum 75mm in transverse and 100mm in longitudnal direction complete all as specified and directed. |
| 96 | M&L for one coat of Aluminium paint over APP based polymeric membrane or surfaces of any description , over 10 cm width or girth not otherwise described all as specified and directed. |
| 97 | S&F in repair steel rolling shutters thickness of laths 1.25mm, without ball bearing as specified including top cover anchoring rod hasp and staple and one shop coat of primer erected in position as indicated, complete push pull or manual type complete all as specified and as directed. |
| 98 | S&F in repair ball bearing for rolling shutters erected in position as indicated complete all as specified and directed. |
| 99 | Supplying and laying synthetic Rubber insulated mats 2.5 mm thick for voltage upto 11 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and directed. |
| 100 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and getting out in soft and loose soil complete all as specified and directed. |
| 101 | M&L for PCC 1:3:6 Type C2 (Nominal mix) (using 40mm graded stone aggregate), as in post holes, foundation, filling and mass concrete complete all as specified and as directed.(Note:- using dimapur sand) |
| 102 | Supply and fixing 3 D acrylic letters with LED Lights of length 60cm, 12.5cm height for making signage boards complete all as specified and directed. |
| 103 | Supply and fixing ACP board natural stone finish of 4mm thickness for fixing 3 D letters for making signage boards complete all as specified and directed. |
| 104 | Supply and fixing 3 D logo with LED Lights of length 60cm, 12.5cm height fixing on the signage boards complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender