Tender For Repair To Boundary Wall, Fencing, Gate, Barbed Wire, Concertina Coil And Misc Items In Domestic Area At Af Stn Sarsawa Under Ge (Af) Sarsawa
Tender Value
24 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
1 days left
EMD
48000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Saharanpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Boundary Wall, Fencing, Gate, Barbed Wire, Concertina Coil And Misc Items In Domestic Area At Af Stn Sarsawa Under Ge (Af) Sarsawa
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of brick masonry work built in Cement mortar or cement lime mortar complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L for Brickwork with subclass ‘B’ bricks, (OLD SIZE BRICKS) straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified. |
| 3 | M&L for brick work with sub class except \\"B\\" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed. |
| 4 | Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish |
| 5 | M&L for PCC 1:2:4 type B1 (using 20 mm gradded stone agg )as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, drain channels, copings,parapets copings, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed. |
| 6 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed. |
| 7 | M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, mixed with water proofing admixture (ISI marked), finished even & smooth without using extra cement complete all as specified.Note: Supply only water proofing admixture shall be measured and paid for separately. |
| 8 | M&L for rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick masonry or concrete surfaces of walls, mixed with water proofing admixture (ISI marked), finished even & smooth without using extra cement complete all as specified.Note: Supply only water proofing admixture shall be measured and paid for separately. |
| 9 | Supply only integral liquid water proofing compound (ISI marked). |
| 10 | M&L for Preparation of new plastered external surface of walls, pillars, cornices, chajja, facia, dropwall, parapet, roof projection and applying two coats of weather proofing coats of 100% Premium acrylic emulsion exterior paint with Graco 490 spray machine, having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10Sqm including applying 1mm thick external wall care putty over disturbed surface during preparation or any reason with sanding for smooth surface, Allow 6-8 hrs to dry the surface for painting of subsequent coats etc. all work, complete all as specified and as directed. Note : Camouflague/plain pattern or pattern decided by engr-in Charge |
| 11 | Demolition of cement concrete (un-renforced) in ground floor and paving. exc. 15 cm thickness (below or above ground level.) & removal of rubbish material complete all as directed by Engineer-in-charge and all as specified. |
| 12 | M&L for 75 mm thick PCC 1:4:8 type D -2 using 40 mm graded aggregate as in sub base complete all as specified& directed by Engr-in-Charge. |
| 13 | Providing and laying prepolished cement concrete Chequered tiles 30cmx30cmx25mm thick, with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape heavy duty , set,jointed and pointed in neat cement slurry in floors over screed bed 15mm thick 1:6 cement mortar complete all as specified & directed. |
| 14 | M&L for 100 mm thick PCC 1:4:8 type D -2 using 40 mm graded aggregate as in sub base complete all as specified& directed by Engr-in-Charge. |
| 15 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified. |
| 16 | Dismantling floor hearth or wall tiling/kerb stone including cement mortar bedding but not backing removing serviceable tiles to store and rubbish of the premises |
| 17 | M&L for 18/19mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed CM 1:6 complete all as specified& directed by Engr-in-Charge. |
| 18 | Dismantling Plain or corrugated aluminium/steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. |
| 19 | M&L Pre- painted galvatume aluminum zinc coating GI based Semi-corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, roofs,fixed with self tapping screws or L-type or J-type or cranked hook bolts as specified. |
| 20 | S&F 0.56mm thick Plain Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing length and girth as fixed with coach screw and Aluminium washer in roof and wall etc. fixed with self tapping screws complete all as specified and directed by Engr-in -Charge. |
| 21 | Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete,brick work,masonary etc. any section, including taking out embedded portion and making good disturbed ground |
| 22 | Excavation in post holes each not exc 0.5 cum, getting out soft/loose soil , returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplush soil to a distance n exc 50m and making good surface complete all as directed by Engineer-in-charge and all as specified. |
| 23 | M&L for PCC Type C2 1:3:6 (40 mm graded aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified & directed by Engr-in-Charge. |
| 24 | S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc) including necessary welding where required as per site requirement and other similar works complete, conforming to Gde E-165 (Fe 290). |
| 25 | S&F mild steel round bars as in tie bars of 10 mm dia and over, fixed to fencing posts including cut to length, bent to shape, welding of bar at spots as directed and other similar works, conforming to Grade E-165 (Fe 290), complete, all as specified & directed.Note: Cost of cutting to length, bent to shape rquired & binding with MS wire is included in above rate. |
| 26 | S&F for Mild steel screw bolts dia of Neck 5mm to 10mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm but n exc 10cm long compleete all as directed by Engr-in-charge. |
| 27 | Dismantling structural steel work including door /gate , frame ,trusses compete all as specified |
| 28 | M&L Compound girders and stachions, lattice giders, aerial masts, stair,gate,frame work , staging for water tanks and the like including caps, bases, splices etc channel sections or angles with plates, including all lattice bars, stiffeners, gussets plates, etc.Fe- 290 (Gde E-165) quality 'A' complete all as directed. |
| 29 | S&F Rolled mild steel Framed work as in doors or gates of angle or other section confirming to Fe-410-S with gusset plate , rails braces etc. complete drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or slinding with and including either hooks hinges and rollers for slinding gates, guide rail of MS flat and framing required for fixing of rollers, pintle hinges, locking arrangement as required and hanging also fastening and fixing complete using Fe- 290 (Gde E-165) quality 'A' compleete all as directed by Engr-in-charge. |
| 30 | M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 Complete all as specified |
| 31 | M&L painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chromic primer including preparation of surfaces. |
| 32 | Dismantling of fencing wire mesh,any type compete all as specified |
| 33 | Supply only Chain link MS galvanisd fencing, any size or type |
| 34 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.incl provission of binding wire. |
| 35 | Restraining & resecuring the old chain link fencing including making good stable etc |
| 36 | S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 37 | Restraining & resecuring the old Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed including making good stable etc |
| 38 | S&F in repair concertina coil fencing with punched tape concertina coil 600 mm dia 10 mtr openable length having 50 Nos rounds per 6 mtr length , spring core wire ( 2.5mm thick) of high tensile strength of 165 Kg/Sqm with tape (0.52 mm thick and weight 43.478 gm/metre and fixing the same with existing Y shape Angle iron with 6 horizontal R.B.T ( Reinforced Barbed Tape) wire, stud tied with GI Staple sand GI clips to retain horizontal all complete as per direction of Engineer-in-Charge |
| 39 | M&L for applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre,of approved manufacturer, of required shade and colour complete, as per manufacturer's specification old surface of walls (internal surface) and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure complete all as specified and directed.Note: Camouflague/Plain pattern or pattern decided by engr-in Charge /Air force Authority. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender