Defence Statutory Bodies & Commissions/Committees Closing in 2 days TDR #58340065

Tender For Completion Of Incomplete Work For Special Repair Of Boundary Wall Approx 600 Rm Near Eqtn Troops At E Amf And Boundary Wall At 32 Mvh Class-I Under Age B/R-Ii Of Ge (North ) Meerut Cantt

Issued by Statutory Bodies & Commissions/Committees · Meerut, Uttar Pradesh
Tender Value
42.61 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
2 days left
EMD
85220
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Completion Of Incomplete Work For Special Repair Of Boundary Wall Approx 600 Rm Near Eqtn Troops At E Amf And Boundary Wall At 32 Mvh Class-I Under Age B/R-Ii Of Ge (North ) Meerut Cantt

BOQ

Name of Work:- COMPLETION Of INCOMPLETE WORK FOR SPECIAL REPAIR OF BOUNDARY WALL APPROX 600 RM NEAR EQTN TROOPS AT E AMF AND BOUNDARY WALL AT 32 MVH CLASS-I UNDER AGE B/R-II OF GE (NORTH ) MEERUT CANTT
Sl. No. Item Description
1Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.
2Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out in any type of soil for foundation, cesspits, manholes, sewage lines, laying of cables/pipe etc and getting out, complete all as specified and directed.
3M&L for PCC 1:4:8 type D2 (using 40mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed
4RCC(Design mix) M-20 (20mm graded aggregate) as in roof beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed
5Formwork for rough finished surfaces to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc also splays between floors and beams, etc complete all as specified and directed
6Formwork for rough finished surfaces to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide complete all as specified and directed.
7Reinforcement TMT Steel bars Fe-500 D of 10mm dia and over, cut to length, bent to shape required, incl cranking,bending , spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed
8Reinforcement TMT Steel bars Fe-500 D of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, incl cranking,bending , spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed
9Demolition of brick work / stone masonry built in cement mortar complete all as specified and directed.
10M&L for brick work with fly ash bricks, straight or curved on plan exceeding 6 cm mean radius built in cement mortar 1:6 complete all as specified and as directed.
11All as described srl item no 10.00 here-in-before but except bricks any types but curved on plan to any radius complete all as specified and directed.
12Taking down cement plaster or cement lime plaster on stone surface/brick surfaces of walls including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
13M&L for rendering 15mm thick other than fair faces of Brick work of concrete surface in cement mortor 1:6 finished even & smooth w/o using extra cement complete all as specified and directed.
14M&L for rendering 15mm thick on fair faces of Brick work of concrete surface in cement mortor 1:6 finished even & smooth w/o using extra cement complete all as specified and directed.
15M&L for rendering 15mm thick other than fair faces of Brick work of concrete surface in cement mortor 1:4 finished even & smooth w/o using extra cement complete all as specified and directed.
16M&L for rendering 15mm thick on fair faces of Brick work of concrete surface in cement mortor 1:4 finished even & smooth w/o using extra cement complete all as specified and directed.
17Providing precast cement concrete louvers and jallies, 35mm thick, type B-0 (1:2:4) 12.5mm graded aggregate, (measured solid), including all mouldings but excluding frame, set in CM 1:4, complete all as specified as directed.
18M&L for preparation of newly plaster surface and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed
19M&L for broken glass coping on top of walls in cement mortar 1:3 complete all as specified and directed.
20Surface dressing of ground in soft/ loose soil not exceeding 15 cm dep and getting out all complete all as specified and directed.
21M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.
22M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6m mean radius, built in CM (1:6) except bricks, use bricks from item no 2 after cleaning complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58340065
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 42.61 Lakhs
LAST DATE 24-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Completion Of Incomplete Work For Special Repair Of Boundary Wall Approx 600 Rm Near Eqtn Troops At E Amf And Boundary Wall At 32 Mvh Class-I Under Age B/R-Ii Of Ge (North ) Meerut Cantt
Basic Detail
Tender No 8733/E8
Bidding Type Tender
Location
City Meerut
State Uttar Pradesh
Key Dates
Publish Date 02 Nov 2026
Submission Date 24 Nov 2026
Open Date 01 Dec 2026
Finance
Tender Value 42.61 Lakhs
Tender Fee 500
EMD 85220
Exemption Available
Document List
8733TD.pdf
ae054e7e-97ae-4770-91c7-3b3321a3c4d6.html
BOQ_893891.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 02, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Dec 01, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
pdf

8733TD.pdf

html

ae054e7e-97ae-4770-91c7-3b3321a3c4d6.html

xls

BOQ_893891.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender