Tender For Provn Of Gi Pipe Line Of Different Sizes At 1 Up Girls Ncc Bn At Agra Stn And Provn Of 2 X Borewell For Icu And Ot Ac Plant At Mh Agra Under Ge (W) Agra
Tender Value
9.79 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
1 days left
EMD
19580
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Gi Pipe Line Of Different Sizes At 1 Up Girls Ncc Bn At Agra Stn And Provn Of 2 X Borewell For Icu And Ot Ac Plant At Mh Agra Under Ge (W) Agra
BOQ
| Sl. No. | Item Description |
| 1 | Geological survey from ant approved agency complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L For Drilling trial bore(verical bore) in any strata 200 mm dia with the help of drilling machine chain pully, tripod and other reqired T&P related to drilling hole complete. |
| 3 | M&L for lowering UPVC plane Casing pipe 150 mm dia of pressure rating 12 Kg/Sqm including making slots wherever necessary complete. |
| 4 | Supply and packing pea gravel of 2 mm to 6 mm size of approved quality as orderedto pack around the casing/slotted pipes in bore well complete. |
| 5 | M&L for MS well cap 2 mm thick of 150 mm dia size on top of the pipes with locking arrangement complete all as specified and directed. |
| 6 | M&L for PVC bail plug/end cap of 150 mm dia 6 mm thick complete all as specified and directed. |
| 7 | M&L for two number MS Clamp made out of flat iron 50 mm x 6 mm thick suitable for holding cloumn pipe & cashing pipe including nuts & bolts complete all as specified and directed by Engr-in-Charge. |
| 8 | Supply and fixing UPVC column pipe 30 mm bore 12 Kg/Sqcm working pressure standard grade for pump set including nylone pp rope16mm dia for supporting of submersible motor necessary fitting and connection to submersible pump complete all as specified and directed by Engr-in-Charge.. |
| 9 | S&F cast iron adopter/ nopple including flenged of dia 30 mm complete all as specified and directed by Engr-in-Charge. |
| 10 | Supply & Lowering commissiong and testing submersible pump set 1 phase, 230 Volts, capacity 1.5 HP and discharge head 75 Mtrs complete all as specified and directed by Engr-in-Charge.. |
| 11 | Supply & fixing PVC insulated submersible coper cable 2.5 Sqmm 3 core 1100 volt grade complete all as specified and directed by Engr-in-Charge.. |
| 12 | M&L for PVC wire rope 10 mm dia complete all as specified |
| 13 | Supply and fixing DOL submersible motor controller starter 1 phase 230 Volt with MCB, over load relay, under volt/over volt relay, contractor, voltmeter, Amp meter, ON & OFF push butten including fixing arrangement suitable for 1.5 HP submersible pump complete all as specified and directed by Engr-in-Charge. |
| 14 | Developing tube wells by compressed air with minimum pressure of 10 Kg/sqcm and minimum 450 CFM all as specified in IS 11189-1985, para 4.3 and directed. Note - Compressor, pump pipe and other allied items will be arranged by contractor and no extra payment will be made by the dept. |
| 15 | Yield testing for the bore well with the help of V notch tank 90 degree by continuously pumping for 16 Hrs. complete all as specified and directed by Engr-in-Charge. |
| 16 | S&F GM gate valve with iron wheel ISI marked IS-778 screwed down for iron pipe or ferrule including fittings such as union , socket, nipple , check nut etc of size 40 mm including cutting of existing GI pipe and fixing properly and taking down of old unserviceable PVC stop valve/gun metal gate valve complete all as specified and directed by Engr-in-Charge |
| 17 | S&F GM gate valve with iron wheel ISI marked IS-778 screwed down for iron pipe or ferrule including fittings such as union , socket, nipple , check nut etc of size 25 mm including cutting of existing GI pipe and fixing properly and taking down of old unserviceable PVC stop valve/gun metal gate valve complete all as specified and directed by Engr-in-Charge |
| 18 | M & L for road cutting for laying of pipe line and making good after laying to match with surrounding area with PCC 1:2:4 type B-1 using 20 mm graded stone aggregate for a depth of 30 cm from top and balance portion shall be filled with approved earth complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L for boring of holes under road, pavement, hard standing by trenchless technology using necessary machinery and labour for laying underground pipe GI/DI up to size 300mm complete all as specified and directed by Engr-in-Charge at site.. Note : Pipes will be measured and paid separately. |
| 20 | Supply, laying and jointing Galvanized steel tubing medium grade 50 mm bore in trenches/on floor/wall with the help of GI Saddle/GI Hook, including ISI marked GI fittings, including cutting to reducing length, screwing and connecting with existing line including fix existing connection with required size of Tee or MS clamp with rubber bush complete all as specified and directed by Engr-in-Charge. Note : The rates also include cutting through walls, floor etc and making them good. |
| 21 | All as per item No-20 above but 40 mm bore. |
| 22 | All as per item No-20 above but 25 mm bore. |
| 23 | All as per item No-20 above but 20 mm bore. |
| 24 | Excavation in trenches not exceeding 1.5m wide and exceeding above 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes,taking out cable, etc not exceeding 10 sqm on plan and getting out in any type soil complete all as specified & directed by Engineer-in-Charge. |
| 25 | Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any soil complete all as specified & directed by Engineer-in-Charge. |
| 26 | Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-charge. |
| 27 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm dia and fixed complete all as specified and directed by Engr-in-Charge |
| 28 | All as per item No-27 above but 25 mm bore. |
| 29 | All as per item No-27 above but 50 mm bore. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender