Tender For Modification And Repairing Of Parking Sheds, Chainlink Fencing And Other Miscellaneous Work In Barc Staff Colony, Tarapur.
Tender Value
4.30 Crore
Estimated cost
Bid Submission
02 Dec 2026
26 days left
EMD
8.60 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Palghar → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Modification And Repairing Of Parking Sheds, Chainlink Fencing And Other Miscellaneous Work In Barc Staff Colony, Tarapur.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling roofing including ridges, valleys and gutter etc and stacking the material within 50 m lead. G.S Sheet / FRP Sheet / AC Sheet. |
| 2 | Dismantling of RCC works carefully manually without damaging adjacent structures excluding cutting of reinforcement including stacking of steel reinforcement bars and disposal of unserviceable materials within 200 m lead as per direction of Engineer-in-charge. |
| 3 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismantling and stacking within 100 m lead. |
| 4 | Earth work excavation by mechanical means (Hydraulic excavator) / manual means in all types of soil other than soft and hard rock, dressing the sides of foundation, ramming of bottom etc. including shoring and dewatering (if necessary) and refilling with selected excavated earth in layers of Nost more than 500 mm thick, each layer well rammed and consolidated including disposing the surplus earth within a distance of 200 m all as per specifications including clearing Jungle, uprooting of vegetation, grass, etc. complete and as directed by the Engineer-in-charge. (a) From 0.00 to 1.50 m depth from Average Ground Level |
| 5 | Lead charges for lead exceeding 1 KM but Nost exceeding 2 KM, by mechanical transport including loading, unloading, stacking / levelling etc.(a) for soil |
| 6 | Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge 230mm With outside material. |
| 7 | Providing and laying in position cement concrete of 1:3:6 (1cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels and as directed by the engineer. |
| 8 | Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc complete as per specifications and drawings. Upto and including 32mm dia reinforcement: Using TMT bars of specified grades. TMT bars to be supplied by vendors using virgin materials. |
| 9 | Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up/rolled sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge. Up to and including 300 mm Joists, 350 mm channels, and below sections . |
| 10 | Providing and laying in position cement concrete of 1:1.5:3 at all levels (1 cement, 1.5 crushed sand, 3 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc.. complete as per specifications and drawings but excluding the cost of shuttering, centering and steel reinforcement. |
| 11 | Providing, centering, shuttering Form work using steel plates, timber planks for all types of structures including necessary strutting, proping, staging, supports, bracings etc. and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels. |
| 12 | Providing and fixing 15 cm wide, 45 cm overall semi-circular Plain G.S. Sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc.,including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m2 |
| 13 | Providing and Painting two coats of synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over a primer coat including preparation of the surfaces, scaffolding complete as per specifications and as directed by the Engineer-in-charge. |
| 14 | Providing Asbestos cement 6 mm thick corrugated sheets (as per IS:14871) roofing up to any pitch and fixing with G.I J or L hooks, bolts and nuts 8 mm dia G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete excluding the cost of purlins, rafters and trusses corrugated sheets and including cutting to size and shape wherever required complete as directed by the Engineer-in-charge. Asbestos sheet roofing without ridges. |
| 15 | Providing and fixing precoated Galvalume Roofing profile sheets of approved size, shape and pitch up to and including single length of 12.00 met. The sheet shall be fixed using self drilling /self tapping screws of size (5.5 X 55 mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete up to any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as directed by the Engineer-incharge. Galvalume sheet roofing 0.50 mm Thickness in Single sheet. |
| 16 | Supplying , cutting to shape and fixing specified diameter UPVC pipes as per IS 4985 for drainage line for parking shed including bend , L bow fitting etc complete all as per drawings and as specified at site. dia 110 mm UPVC pipe. |
| 17 | Providing and fixing GI chain link fabric fencing Made of GI wire of dia 4 mm of required width in mesh size 50 x 50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer-in-charge. |
| 18 | Labour charges only for fixing the posts in cement concrete 1:4:8 and fixing wire fabric chain link fencing of 50 mm x50mmx4mm thick with posts of specified material and of standard design placed steel wire fabric fixed between the posts fitted and fixed with G.I. staples / G.I bolts or tied to 6 mm bar nibs with G.I. binding wire complete all as per specifications and drawings and as directed at site. (cost of posts, welded steel wire fabric, painting, earth work excavation and concrete to be paid for separately). |
| 19 | Dismantling and stacking within 100 m lead fencing posts or struts including all earth work and dismantling of concrete etc. For R.C.C Post. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysDec 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender