Tender For Special Repairs To 23A Sluice Of 9Th Distributary In Ambalakaranpatty Village In Melur Taluk In Madurai District.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Nov 2026
19 days left
EMD
3000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Madurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To 23A Sluice Of 9Th Distributary In Ambalakaranpatty Village In Melur Taluk In Madurai District.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, clearing away and carefully stacking material and without disturbing nearby structure useful for reuse for any thickness of brick or stone masonry in cement Mortar walls under 3 (Three) meters high etc, complete as directed by the Engineer in charge of works and as per the technical specifications. |
| 2 | Earthwork excavation for foundation Earth work Excavaction for foundation in hard stiff clay,stiff black cotton soil, Hard red earth, shales, murrams, gravel, stoney earth and earth mixed small size blouders and hard grvelly soil depositing on bank including shoring strutting and bailing out water wherever necessary, well rammed consolidated and deposting the surplus earth in places as shown by the depar tmental offices with an initial lead of 10metres and initial left of 2 metres and clearing, levelling the site etc., complying with standard specification and as directed by the departmental officers. |
| 3 | Providing and Placing Plain Cement Concrete M15 grade using well graded aggregates of nominal maximum size of 40mm and downgraded to I.S. Specified grading (to achieve the specified characterstics strength of 10N/mm2 in 28 days) andmixing the ingredients in approved mixer including dewatering of the placement site by bailing/pumbing and diverting wharever necessary, placing concrete in layers, watering, curing, finishing the surface with all leads and lifts etc complete as directed by the Engineer in Charge of works and as per the technical specifications. |
| 4 | Supplying and erecting water tight steel centering for sides and soffits including necessary supports and shuttering including strutting for retaining wall and all RCC works such as column, footing, plinth beam, etc., upto 3.29m height and all cross bracings using mild steel BG 10 sheets of size 90cm x 60cm gauge stiffeded with welded mild steel angles of size 25x25x3mm for boarding laid over silver oak ( country wood ) joits of size 10x6.5cm spaced at about 90cm centre to centre and suitably supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre including cost of materials etc., complete complying with standard specification as directed by the departmental officers the payment for centering shall be given after the concrete is laid and the retrived materials should be taken back the contractor |
| 5 | Without Strutting |
| 6 | With strutting |
| 7 | Cement Concrete of M15 grade using 40% quantity of 20mm size HBG stone jelly and 60% quantity of 40mm HBG stone jelly including curing, finishing, dewatering if found necessary, compacting complying with standard specification. SS 28 as per the technical specifications. |
| 8 | Plastering with cement mortar 1:4 (One cement and four P.sand ) 20 mm thick - 10m2 including curing, finishing etc., complete complying with the standard specification |
| 9 | Supplying and fixing of Head Set Assembly light duty with hexagonal nut (Approximate 50 Kg) made up of cast iron including moulding, machining and the hexagonal nut threaded to suit the Screw Rod provided with thrust bearings for smooth operation. Conveying and leading the head set assemblyto the work site. Fixing the head set assembly to the top beam by usingrequired rust fre bolts and nuts in proper alignment including dismantling the existing damaged Head set assembly, conveying and stacking at sectio store. The Head set assembly supplied with operating key and the both should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours charges for wooden pattern, moulding and charges for labours and materials and warranty for 5 years etc.., |
| 10 | Supplying , Laying and fixing in position of R.C.C. Hume pipes of NP3 class of 300mm Dia with suitable collars including labour charges and jointing materials etc., complete complying with standard specification and as directed by the departmental officers complying with standard specification and as directed by the departmental officers |
| 11 | Earthwork in all soils except hard rock requiring blasting and conveying for formation of bund with lead of 0-100m deploying earth moving machinery and tippers including benching, formation of bunds, breaking clods sectioning, including watering and consolidation by power roller rolling with lead of 2KMCT including watering and consolidation by power roller ect, complete as directed by the engineer in charge of works and as per technical specifications. |
| 12 | Gst 18% |
| 13 | Sub Total Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender