Tender For Special Repairs To Chinnapokki Tank In Kurichipatti Village Of Melur Taluk In Madurai District.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Nov 2026
8 days left
EMD
3500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Madurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Chinnapokki Tank In Kurichipatti Village Of Melur Taluk In Madurai District.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, clearing away and carefully stacking material and without disturbing nearby structure useful for reuse for any thickness of brick or stone masonry in Cement Mortar walls under 3 (Three) meters high etc, complete as directed by the Engineer in charge of works and as per the technical specifications. |
| 2 | Earth work Excavaction for foundation in hard stiff clay,stiff black cotton soil, Hard red earth, shales, murrams, gravel, stoney earth and earth mixed small size blouders and hard grvelly soil depositing on bank including shoring strutting and bailing out water wherever necessary, well rammed consolidated and deposting the surplus earth in places as shown by the depar tmental offices with an initial lead of 10metres and initial left of 2 metres and clearing, levelling the site etc., complying with standard specification and as directed by the departmental officers. |
| 3 | Suppling and filling with M.sand for filling in layers of not more than 15cm thick well rammed with water complying with standard specification and as directed by the departmental officers. |
| 4 | Providing and placing Plain Cement Concrete M 10 grade using well graded aggregates of nominal maximum size of 40mm and downgraded to I.S specified grading (To achieve the specified charaterstics strength of 10N/mm² in 28 days) and mixing the ingredients in approved mixer including dewatering of the placement site by bailling / pumping and diverting water wherever necessary, placing concrete in layers, watering, curing, finishing the surface with all leads and lifts as applicable etc., complete as directed by the Engineer in charge of works and as per the technical specifications. |
| 5 | Providing Steel Centering for Slabs, beams or plain surfaces including strutting upto 3.29 m high using MS sheets, 10 guage thick of size 90cm x 60cm, Stiffened with Ms angles of size 25mm x 25mm x 3mm laid over silver oak joists of size 10 cm x 6.5 cm spaced at 90 cm c/c and supported by casurina props of 10 cm to 13cm dia spaced at 75 cm c/c and removing the centering and shuttering after specified period without damaging the concrete laid, complying with standard specification and as directed . |
| 6 | P.C.C. - M15 - 20mmProviding and placing Plain Cement oncrete M 15 grade using crusher broken hard coarse aggregate (well graded) of nominal maximum size of 20mm and downgraded to I.S specified grading (To achieve the specified characteristic strength of 15N/mm2 in 28 days) and mixing the ingredients in approved mixer including dewatering of the placement site by baling / pumping and diverting wherever necessary, placing concrete in layers and water curing, finishing the surface with all leads and lifts etc., complete as directed by the Engineer in charge of works and as per the technical specifications. |
| 7 | Random rubble masonry using new rough stone and bond stones in cement mortar 1:4 (One cement and four M.sand by volume) for foundation and basement including simultaneous pointing and all incidental charges such as scaffolding, curing, finishing etc., complete complying with specification and as directed by the departmental officers at site. |
| 8 | old Stone |
| 9 | New stone |
| 10 | Supplying and fixing of Head Set Assembly light duty with hexagonal nut (Approximate 50 Kg) made up of cast iron including moulding, machining and the hexagonal nut threaded to suit the Screw Rod provided with thrust bearings for smooth operation. Conveying and leading the head set assemblyto the work site. Fixing the head set assembly to the top beam by usingrequired rust fre bolts and nuts in proper alignment including dismantling the existing damaged Head set assembly, conveying and stacking at sectio store. The Head set assembly supplied with operating key and the both should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours charges for wooden pattern, moulding and charges for labours and materials and warranty for 5 years etc.., |
| 11 | Fabricating, Supplying and erection of Screw gearing steel shutters of size above upto 1.00 m width consist shutters of skin plate made out of 8mm thick mild steel plate and horizontally stiffened with 65x65x6mm mild steel Angle at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipment. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipment. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc.,complete. |
| 12 | Earthwork in all soils except hard rock requiring blasting and conveying for formation of bund with lead of 0-100m deploying earth moving machineries and tippers including benching, formation of bunds, breaking clods sectioning, compaction with Power roller etc., complete |
| 13 | Gst 18% |
| 14 | Sub Total Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender