Tender For Special Repairs To Sluice No.1 Of Chinnaperumalkulam Tank In Vellaripatti Village Of Melur Taluk In Madurai District.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Nov 2026
22 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Madurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Sluice No.1 Of Chinnaperumalkulam Tank In Vellaripatti Village Of Melur Taluk In Madurai District.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, clearing away and carefully stacking materials reuse of following items Brick/stone masonry in cement mortar walls under 3m high.. |
| 2 | Earthwork Excavation for foundation inhard stiff clay, stiff black cotton soil, hard red earth, shales murrams, gravels, stoney earth and earth mixed small size blouders and hard gravelly soil depositing on bank including shoring strutting and bailing out water wherever necessary, and depositing the surplusearth in places as shown by the departmental officers with an initial lead of 10m and initial left of 2m and clearning, levelling the site etc, complying with standard specification and as directed by the departmental officers. |
| 3 | Supplying and filling with M-Sand of each layer not more than 15cm thick including consolidation etc complete and as per the technical specifications directed by the Engineer in charge of the works for sluices, weir sand retaining wall etc, complete complying with standard specification and as directed by the deparmental officers. |
| 4 | Providing and Placing Plain Cement Concrete M15 grade (1:2:4) using well graded aggregates of nominal maximum size of 40mm and downgraded to I.S. Specified grading (to achieve the specified charaterstics strength of 10N/mm2 in 28 days) and mixing the ingredients in approved mixer including dewatering of the placement site by bailling/pumbing and diverting wharever necessary,placing concrete in layers,watering curing,finishing the surface with all leads and lifts etc, complete as directed by the Engineer in charges of works and as per the technical specifications (without vibration) |
| 5 | Supplying and erecting water tight steel centering for sides and soffits including necessary supports and shuttering including strutting for retaining wall and all RCC works such as column, footing, plinth beam, etc., upto 3.29m height and all cross bracings using mild steel BG 10 sheets of size 90cm x 60cm gauge stiffeded with welded mild steel angles of size 25x25x3mm for boarding laid over silver oak ( country wood ) joits of size 10x6.5cm spaced at about 90cm centre to centre and suitably supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre including cost of materials etc., complete complying with standard specification as directed by the departmental officers the payment for centering shall be given after the concrete is laid and the retrived materials should be taken back the contractor. |
| 6 | Without strutting |
| 7 | With Sttutting |
| 8 | Providing and placing in position of plain Cement concrete of grade M15 usinghard well graded aggregates with the nominal maximum size of coarse aggregate of 40mm (60%) and 20mm (40%); weigh batching the ingredients and mixing in approved mixers/batching plant (to produce concrete of the specified characteristic strength of 15 N/mm2 at 28days) including dewatering the placement site by bailing/pumping and by diverting wherever necessary; laying the concrete in layers of not exceeding 15 cm thick and in bays; vibrating, compacting and finishing the surface with all leads and lifts; watering curing complete so as to attain the profile and strength specified in the approved drawing & specifications and as directed by the Engineer in charge of works and as per the technical specifications. |
| 9 | Fabricating, Supplying and erection of Screw gearing steel shutters of size above upto 1.00 m width consist shutters of skin plate made out of 8mm thick mild steel plate and horizontally stiffened with 65x65x6mm mild steel Angle at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipment. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipment. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc.,complete. |
| 10 | Fabricating, supplying and fixing of 50mm dia Screw Rod made up of Mild Steel duly machined and fully threaded to suit the Head set Assembly and provided with required holes. Conveying and leading the screw rod to the worksite. Fixing the screw rod to the shutter gusset plate with required bolt and nut in proper alignment to the head set including dismantling the existing damaged screw rod, conveying and stacking at section store. The Screw rod should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, conveyance charges for labours and materials and warranty for 5 years etc., complete. |
| 11 | Supplying and fixing of Head Set Assembly medium duty with hexagonal nut (Approximate 50 Kg) made up of cast iron including moulding, machining and the hexagonal nut threaded to suit the Screw Rod provided with thrust bearings for smooth operation. Conveying and leading the head set assembly to the work site. Fixing the head set assembly to the top beam by using required rust fre bolts and nuts in proper alignment including dismantling the existing damaged Head set assembly, conveying and stacking at sectio store. The Head set assembly supplied with operating key and the both should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours charges for wooden pattern, moulding and charges for labours and materials and warranty for 5 years etc., complete |
| 12 | Fabricating, supplying and fixing of Shutter Groove Angle made up of 65x65x6mm Mild Steel angle for required height including welding hold fast of size 25x25x6mm Mild steel angle 2 Nos on both sides and conveying and leading the groove angle to the vents. Fixing the angle to the grooves in proper alignment including dismantling the existing damaged groove angles, conveying and stacking at section store. The groove angle should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, consumables, labours charges for all fabricating and hoisting equipments, conveyance, petty civil works and warranty for 5 years etc., complete, etc., |
| 13 | Fabricating, Supplying and fixing of Top Beam made up of 150x75mm (ISMB 150 duly drilled to suit the Head Set Assembly with required bed bolt made out of 25mm mild steel round rod duly threaded with suitable anchorage arrangements to a height of 0.60m with necessary Fish plate made out of 12mm mild steel plate of size 0.30x0.15m 2 Nos with required holes.Conveying and leading the top beam arrangements to the work site. Fixing the top beam arrangements at the top of the vent in correct position including dismantling the existing eroded top beam, conveying and stacking and the section stores. The top beam should be painted with two coats of AC black paint over one coat of Red Oxide primer. The Rate including cost of materials, labours, charges for all fabricating and hoisting equipments, cost of petty civil works conveyance charges for labours and materials and warranty for 5 years etc... complete. |
| 14 | Supplying , Laying and fixing in position of R.C.C. Hume pipes of NP3 class of 300mm Dia with suitable collars including labour charges and jointing materials etc., complete complying with standard specification and as directed by the departmental officers complying with standard specification and as directed by the departmental officers |
| 15 | Pointing with Cement Mortar 1:4 (one cement and four P-Sand) using 20mm thick including curing and finishing etc complete complying with standard specification |
| 16 | Supplying, fabricating and placing in position of mild steel or ribbed tor steel grills for all reinforced cement concrete works including cost of steel, binding wire, decoiling, bar bending, mild steel or ribbed tor steel with all leads and lifts etc, complete and as directed by the departmental oficers. |
| 17 | Gst 18% |
| 18 | Sub Total Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender